V-TAC VT-2017 E27 17W LED Bulb Instruction Manual

1. Product Overview

The V-TAC VT-2017 is an E27 17W LED bulb designed for efficient illumination. It features an A65 bulb shape, constructed from durable white thermoplastic and aluminum. This model provides a 200° beam angle and a luminous flux of 1521 lumens, offering an energy efficiency of 89 lumens per watt. Its 17W power output is equivalent to a traditional 100W incandescent lamp, ensuring significant energy savings. The bulb utilizes SMD LED technology with an opaque cover for diffused light. This specific variant provides Natural White light at 4000K.

Key Features:

• Instant 1521 lumens brightness with no warm-up time.
• Energy-efficient 17W power consumption, equivalent to 100W incandescent.
• High luminous efficacy of 89 lumens per watt.
• Durable opaque plastic cover for even light distribution.
• Extended lifespan of 30,000 hours, providing long-term reliability.

2. Safety Information

• Ensure power is turned off at the main switch before installation or removal.
• Do not attempt to disassemble or modify the bulb.
• This bulb is designed for indoor use only.
• Avoid touching the bulb immediately after use, as it may be hot.
• Do not use with dimmers unless explicitly stated as dimmable. This model is not specified as dimmable.
• Keep out of reach of children.
• If the bulb is damaged, discontinue use immediately and replace it.

3. Package Contents

Verify that all items are present in the package:

• 6x V-TAC VT-2017 E27 17W LED Bulbs
• 1x Lamp Holder Splitter (where applicable, as indicated in product description)

4. Setup and Installation

1. Turn off Power: Before starting, ensure the power supply to the light fixture is completely turned off at the circuit breaker or wall switch.
2. Remove Old Bulb: Carefully unscrew the existing bulb from the lamp holder. Allow it to cool if it has been recently in use.
3. Insert New Bulb: Gently screw the V-TAC VT-2017 LED bulb into the E27 lamp holder. Ensure it is securely fastened but do not overtighten.
4. Restore Power: Once the bulb is installed, restore power to the light fixture.
5. Test: Turn on the light switch to confirm the bulb is functioning correctly.

Note: If using the included splitter, first screw the splitter into the E27 lamp holder, then screw the LED bulbs into the splitter's E27 sockets. Ensure the total wattage does not exceed the splitter's or fixture's maximum rating.

5. Operating Instructions

The V-TAC VT-2017 LED bulb operates like a standard light bulb. Simply use the existing wall switch or fixture switch to turn the light on or off. The bulb provides instant full brightness upon activation.

6. Maintenance

• Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Replacement: When the bulb reaches the end of its lifespan, turn off the power, allow it to cool, and replace it following the installation steps.
• Storage: If storing bulbs, keep them in their original packaging in a cool, dry place.

7. Troubleshooting

8. Specifications

9. Warranty and Support

V-TAC products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official V-TAC website or contact your retailer. Keep your purchase receipt as proof of purchase.