1. Product Overview
This manual provides essential information for the safe and effective use of your FITHOOD replacement battery, model CS-HAT560VX. This high-quality Lithium-Ion battery is designed to replace the original battery in compatible Haier tablets, specifically models TAB-T550WSC and TAB-T560H, and is equivalent to battery part number FL2600.
Important Safety Information: Lithium-Ion batteries can pose a fire or burn hazard if mishandled. Read all safety instructions carefully before installation and use. Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. Do not store above 60°C (140°F).
2. Compatibility
This FITHOOD replacement battery is compatible with the following Haier tablet models and battery part numbers:
- Compatible Tablet Models:
- Haier TAB-T550WSC
- Haier TAB-T560H
- Compatible Battery Part Number:
- FL2600
Before installation, please verify that your device model and original battery part number match those listed above to ensure proper fit and function.
3. Specifications
The technical specifications for the FITHOOD CS-HAT560VX replacement battery are as follows:
| Feature | Specification |
|---|---|
| Model Number | CS-HAT560VX |
| Battery Type | Lithium-Ion |
| Capacity | 2600mAh |
| Watt-Hours (WH) | 38.48Wh |
| Voltage | 14.8V |
| Dimensions (L x W x H) | 70.24 x 37.2 x 36.8mm (2.77 x 1.46 x 1.45 inches) |
| Weight | 220.0g (7.8 ounces) |
| Certifications | ISO9001, RoHS, CE, UN38.3, MSDS |
Image 1: Side view of the FITHOOD replacement battery, highlighting the product label with model and rating information.
4. Installation Guide
Replacing a tablet battery requires careful handling and specific tools. If you are not comfortable performing this procedure, it is recommended to seek assistance from a qualified technician or refer to your tablet's original service manual.
- Preparation: Ensure your tablet is powered off completely and disconnected from any power sources. Gather necessary tools, which may include small screwdrivers, plastic prying tools, and an anti-static wrist strap.
- Disassembly: Carefully open your tablet's casing. This often involves removing screws and gently prying open the back panel. Consult your tablet's specific disassembly guide for precise instructions.
- Locate and Disconnect Old Battery: Identify the existing battery. It will typically be connected to the tablet's motherboard via a small connector. Gently disconnect this connector.
- Remove Old Battery: The old battery may be secured with adhesive or screws. Carefully remove it, taking care not to puncture or bend the battery.
- Install New Battery: Place the FITHOOD replacement battery into the battery compartment. Ensure it fits securely.
- Connect New Battery: Connect the new battery's connector to the motherboard. Ensure it is seated firmly.
- Reassembly: Carefully reassemble your tablet, ensuring all components are properly aligned and secured.
- Initial Charge: After reassembly, connect your tablet to its charger and allow it to charge fully before powering it on.
Image 2: Top-down view of the FITHOOD replacement battery, showing the attached wires and connector for installation.
Image 3: Detailed view of the battery's electrical connector, which plugs into the tablet's motherboard.
5. Operating Instructions
Once installed, the FITHOOD replacement battery operates like your original tablet battery. Follow these guidelines for optimal performance:
- First Use: For the first use, fully charge the battery to 100% before using your tablet.
- Regular Charging: Charge your tablet using its original charger or a compatible, certified charger. Avoid using unapproved chargers.
- Avoid Deep Discharge: Do not allow the battery to completely drain to 0% frequently, as this can reduce its lifespan.
- Temperature: Operate your tablet within its recommended temperature range. Extreme cold or heat can negatively impact battery performance and longevity.
6. Maintenance and Storage
Proper maintenance and storage can extend the life of your battery:
- Storage: If storing the battery for an extended period, ensure it is charged to approximately 50-60% and stored in a cool, dry place away from direct sunlight.
- Cleaning: Keep the battery and its contacts clean and free from dust or debris. Use a dry, soft cloth for cleaning.
- Avoid Physical Damage: Protect the battery from drops, impacts, and crushing, which can lead to internal damage and safety hazards.
7. Troubleshooting
If you encounter issues with your replacement battery, consider the following:
- Battery Not Charging:
- Ensure the battery connector is securely seated.
- Verify that your charger and charging cable are functioning correctly.
- Check the tablet's charging port for any debris or damage.
- Short Battery Life:
- Confirm that the battery is fully charged.
- Reduce screen brightness and close unnecessary background applications on your tablet.
- Check for any software updates for your tablet that might improve power management.
- Tablet Not Powering On:
- Ensure the battery is properly installed and charged.
- Attempt a hard reset of your tablet (refer to your tablet's manual for instructions).
If problems persist after attempting these steps, it may indicate a more complex issue with the tablet or battery. Contact customer support or a professional repair service.
8. Warranty and Support
FITHOOD is committed to providing high-quality products. For any questions, concerns, or technical assistance regarding your replacement battery, please contact FITHOOD customer support through the retailer where the product was purchased or via the contact information provided with your product packaging.
Please retain your proof of purchase for warranty claims. Specific warranty terms and conditions may apply.