DOGNESS F06WH 2L Automatic Pet Feeder Instruction Manual

1. Introduction

Thank you for choosing the DOGNESS F06WH 2L Automatic Pet Feeder. This device is designed to provide scheduled and portion-controlled meals for your pet, ensuring a consistent feeding routine. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Image 1.1: The DOGNESS F06WH Automatic Pet Feeder in operation, dispensing dry food.

2. Product Overview and Features

The DOGNESS F06WH is a 2-liter capacity automatic pet feeder suitable for small to medium-sized cats and dogs. It features programmable meal times, adjustable portion control, and a voice recording function to call your pet for meals.

Key Features:

• 2-Liter Capacity: Ideal for small pets, ensuring sufficient food supply.
• Timed Dispense: Schedule up to 4 meals per day.
• Portion Control: Customize food amounts for each meal to manage your pet's diet.
• Voice Recording: Record a 10-second message to play at meal times.
• Dual Power Supply: Operates with an AC adapter and includes a battery backup (batteries not included) for uninterrupted feeding during power outages.
• Detachable Stainless Steel Bowl: Easy to clean and promotes hygiene.
• Clog-Free Design: Engineered to prevent food jams and ensure smooth dispensing.

Image 2.1: Overview of the feeder's main features, including scheduling, control panel, voice recording, detachable bowl, dual power, and double fresh lock system.

3. Setup Instructions

3.1 Unpacking and Component Identification

Carefully remove all components from the packaging. Ensure the following parts are present:

• Main Feeder Unit
• Stainless Steel Feeding Bowl
• Power Adapter
• Instruction Manual

Image 3.1: Key components of the feeder, including the moisture absorbing box, control panel, food outlet, and stainless steel bowl.

3.2 Power Supply

1. Connect the power adapter to the feeder's power input port and then plug it into a standard wall outlet.
2. For battery backup, open the battery compartment (usually on the bottom) and insert 3 D-size batteries (not included). This ensures the feeder continues to operate during power outages.

3.3 Filling the Food Hopper

1. Open the top lid of the feeder.
2. Pour dry pet food into the hopper. Ensure the food kibble size is appropriate for the feeder (typically less than 15mm).
3. Close the lid securely to maintain food freshness and prevent pets from accessing the food prematurely.

3.4 Placing the Feeding Bowl

Place the stainless steel feeding bowl directly beneath the food outlet of the main feeder unit.

4. Operating Instructions

4.1 Control Panel Overview

Image 4.1: Labeled control panel showing buttons for meal settings, time, portion size, voice recording, and battery indicator.

The control panel features an LCD display and several buttons for programming:

• Meal Buttons (Breakfast, Lunch, Dinner, 4th Meal): Select which meal to program.
• On/Off (Feed): Activates or deactivates a programmed meal.
• Meal Size: Adjusts the portion size for the selected meal.
• Hour/Minute: Sets the time for meals and the current time.
• Manual: Dispenses a single portion manually.
• Time: Enters time setting mode.
• MIC: Initiates voice recording.
• Play: Plays the recorded voice message.
• Low Battery Indicator: Alerts when batteries need replacement.

4.2 Setting Current Time

1. Press the 'Time' button. The hour display will flash.
2. Use the 'Hour' button to adjust the hour (24-hour format).
3. Press the 'Time' button again. The minute display will flash.
4. Use the 'Minute' button to adjust the minutes.
5. Press the 'Time' button once more to save the current time.

4.3 Programming Feeding Schedules

The feeder allows for up to four meals per day (Breakfast, Lunch, Dinner, 4th Meal).

1. Select the desired meal (e.g., 'Breakfast' button). The meal time will flash.
2. Use the 'Hour' and 'Minute' buttons to set the feeding time for that meal.
3. Press the 'Meal Size' button. The portion number will flash.
4. Use the 'Meal Size' button to adjust the portion size (e.g., 1-39 units). Each unit typically dispenses approximately 5g of dry food. Test to confirm desired portion.
5. Press the 'On/Off' button to activate the meal schedule. A checkmark will appear on the display.
6. Repeat for other meals as needed.

4.4 Voice Recording

Record a 10-second message to play before each scheduled meal.

1. Press and hold the 'MIC' button.
2. Speak your message clearly into the microphone.
3. Release the 'MIC' button to save the recording.
4. Press the 'Play' button to listen to your recorded message.

Image 4.2: A cat responding to the feeder, demonstrating the voice recording feature that calls pets for meals.

4.5 Manual Feeding

To dispense a single portion instantly, press the 'Manual' button. This will dispense one unit of food.

5. Maintenance

5.1 Cleaning the Feeding Bowl

The stainless steel feeding bowl is detachable and can be hand washed with mild soap and water. Rinse thoroughly and dry completely before reattaching.

5.2 Cleaning the Food Hopper and Dispenser

To maintain hygiene and prevent food residue buildup:

• Ensure the feeder is unplugged and batteries are removed before cleaning.
• Wipe the inside of the food hopper with a clean, damp cloth. Avoid using excessive water.
• The internal dispensing mechanism (soft film, separate baffle, ABS impeller) is designed to be clog-free. If cleaning is required, use a dry brush or cloth to remove any food particles. Do not immerse the main unit in water.
• Ensure all parts are completely dry before refilling with food and reassembling.

Image 5.1: Internal components designed for clog-free operation, including soft film, separate baffle, and ABS impeller.

6. Troubleshooting

If you encounter issues with your DOGNESS F06WH Automatic Pet Feeder, refer to the following common problems and solutions:

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official DOGNESS website. Keep your purchase receipt as proof of purchase for any warranty claims.