BOREA BR08 Hi-Fi Floorstanding Speakers - User Manual

Introduction

Thank you for choosing the triangle BOREA BR08 Hi-Fi Floorstanding Speakers. These speakers are designed to provide an immersive and high-fidelity audio experience, suitable for both music and home cinema applications. Featuring advanced driver technology, including an EFS tweeter and a natural cellulose paper midrange, the BR08 delivers clear, detailed, and dynamic sound reproduction.

This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your BR08 speakers. Please read it thoroughly before use to ensure optimal performance and longevity of your product.

Setup

Proper setup is crucial for achieving the best sound quality from your BOREA BR08 speakers.

Unboxing and Inspection

• Carefully remove the speaker from its packaging.
• Inspect the speaker for any signs of damage during transit. If damage is found, contact your retailer immediately.
• Ensure all included components are present: HiFi Floor Standing Speaker Borea BR08 (Single).

Placement

The placement of your floorstanding speakers significantly impacts sound quality. Consider the following guidelines:

• Stereo Setup: For optimal stereo imaging, place the speakers equidistant from your primary listening position, forming an equilateral triangle.
• Distance from Walls: Avoid placing speakers directly against walls, as this can overemphasize bass frequencies. A distance of at least 10-15 inches (25-38 cm) from the rear wall is generally recommended. Experiment with placement to find the best balance for your room.
• Toe-in: Slightly angle the speakers inward towards the listening position (toe-in) to improve soundstage and focus.
• Level Surface: Ensure speakers are placed on a stable, level surface to prevent vibrations and ensure proper sound dispersion.

Angled front view of the Triangle Borea BR08 Floorstanding Speaker in black finish.

Diagram showing the dimensions of the Borea BR08 speaker: 8.11 inches deep, 12.36 inches wide, and 40.16 inches high.

Operating

The BOREA BR08 speakers are passive speakers and require an external amplifier or receiver for operation.

Connecting to an Amplifier/Receiver

• Power Off: Ensure your amplifier/receiver is turned off before making any connections.
• Speaker Cables: Use high-quality speaker cables. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal on your amplifier. Connect the negative (-) terminal (black) on the speaker to the negative (-) terminal on your amplifier.
• Polarity: Maintain correct polarity for both speakers (positive to positive, negative to negative) to ensure proper sound reproduction and imaging.
• Secure Connections: Ensure all connections are tight and secure to prevent signal loss or short circuits.

Rear view of the Borea BR08 speaker, highlighting the input terminals for amplifier connection.

Power Handling and Impedance

The BOREA BR08 speakers have a power handling capacity of 150W and an impedance of 8 Ohms. Ensure your amplifier's output power and impedance match or are compatible with these specifications to prevent damage to either the speakers or the amplifier.

• Recommended Amplifier Power: While the speakers can handle up to 150W, it is often safer to use an amplifier with slightly less power than the speaker's maximum rating to avoid accidental overdriving.
• Volume Control: Always start with a low volume level on your amplifier and gradually increase it to a comfortable listening level. Avoid pushing the volume to the point of audible distortion.

Maintenance

Regular maintenance will help preserve the appearance and performance of your BOREA BR08 speakers.

Cleaning

• Cabinet: Use a soft, dry, lint-free cloth to gently wipe the cabinet surfaces. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners, solvents, or polishes, as these can damage the finish.
• Drivers: The speaker drivers (tweeter, midrange, woofers) are delicate. Do not touch them directly. Use a soft brush or compressed air (from a safe distance) to remove dust if necessary.
• Grilles: If your speakers come with removable grilles, gently remove them and use a soft brush or vacuum cleaner with a brush attachment to clean off dust.

General Care

• Environment: Place speakers in a stable environment, away from direct sunlight, excessive heat sources, and high humidity.
• Vibration: Ensure speakers are stable and do not vibrate excessively during playback. If necessary, use isolation pads or spikes (if provided) to minimize vibration transfer to the floor.

Troubleshooting

If you encounter issues with your BOREA BR08 speakers, refer to the following common problems and solutions.

No Sound from Speakers

• Check Connections: Ensure all speaker cables are securely connected to both the speakers and the amplifier, and that polarity is correct.
• Amplifier Status: Verify that your amplifier/receiver is powered on, set to the correct input, and not in mute mode.
• Source Device: Check if your audio source (e.g., CD player, streamer) is functioning correctly and playing audio.
• Speaker Selection: If your amplifier has A/B speaker outputs, ensure the correct output is selected.

Distorted or Unclear Sound

• Volume Level: Reduce the volume level. Distortion often occurs when the amplifier is overdriven.
• Cable Quality: Inspect speaker cables for damage or loose connections. Consider using higher quality cables if issues persist.
• Source Quality: Ensure the audio source material is of good quality. Low-quality recordings or streaming can result in poor sound.
• Room Acoustics: Room acoustics can significantly affect sound. Experiment with speaker placement and consider acoustic treatments if necessary.

Uneven Sound or Poor Imaging

• Speaker Placement: Ensure speakers are symmetrically placed relative to the listening position and that toe-in is consistent.
• Polarity: Double-check that the polarity (+/-) is consistent for both speakers. Incorrect polarity will cause phase issues and poor imaging.
• Room Reflections: Hard surfaces in the room can cause reflections. Consider adding rugs, curtains, or furniture to absorb sound.

If these steps do not resolve the issue, please refer to the Warranty and Support section for further assistance.

Specifications

Warranty and Support

For detailed warranty information, please refer to the official triangle website or the warranty card included with your product. Warranty terms and conditions may vary by region and retailer.

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact triangle customer support through their official website:

Visit trianglehifi.com

Please have your product model number (BR08) and purchase details ready when contacting support.