Introduction
Thank you for choosing the LAOPAO Automatic Hands Free Foaming Soap Dispenser. This device is designed to provide a hygienic and convenient way to dispense foaming soap, making handwashing easier and more efficient. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new soap dispenser.
Product Features
- Automatic Foaming: Fully touchless operation with high and low foam modes to suit your preference. Dispenses foam within 0.2 seconds.
- Easy Refill: The soap tank detaches from the bottom for safe and easy refilling, preventing liquid from seeping into the dispenser's electronic components.
- High-Precision Sensor: Equipped with a quick infrared sensor for instant foam dispensing with a simple hand wave.
- Simple Operation: A single button controls power on/off and allows selection between high and low soap modes with a 3-second long press.
- Generous Capacity: 240ml (8.12 oz) capacity with a visible volume indicator.
- Battery Powered: Requires 1.5V AA batteries for operation.
Setup Instructions
- Install Batteries:
Image: The back of the dispenser showing the battery compartment and power button. Open the battery compartment cover located at the back of the dispenser. Insert three 1.5V AA batteries, ensuring correct polarity. Close the battery compartment cover securely.
- Prepare Soap Solution:
Image: A diagram illustrating how to dilute liquid soap with water. If using foaming soap, pour it directly into the tank. If using regular liquid soap, dilute it with water at a 1:4 ratio (1 part soap to 4 parts water) to achieve optimal foam consistency. Stir gently to mix.
- Fill Soap Tank:
Image: A four-step visual guide showing how to detach the soap tank, remove its lid, pour soap solution, and reattach the tank. Remove the soap tank from the bottom of the dispenser. Unscrew the lid and carefully pour the prepared soap solution into the tank. Do not overfill. Reattach the lid and securely place the tank back onto the dispenser base.
- Power On: Press and hold the power button (located at the back) for a few seconds until the indicator light turns on.
Operating Instructions
- Dispensing Soap: Place your hand under the dispenser nozzle. The infrared sensor will detect your hand and automatically dispense a portion of foaming soap.
Image: A hand positioned under the dispenser nozzle, receiving a dollop of foam.
- Adjusting Foam Output: The dispenser offers two foam output levels (high and low). To switch between modes, long press the power button for 3 seconds. The indicator light may change to confirm the selection.
Image: A visual guide demonstrating the process of adjusting the foam output level.
- Smiley Face Indicator: A smiley face will illuminate on the dispenser when it is actively dispensing soap, indicating proper function.
Image: The dispenser with a glowing smiley face on its front panel.
- Video Demonstration: For a visual guide on the dispenser's operation, please watch the official product video below.
Video: An official product video demonstrating the LAOPAO Touchless Soap Dispenser in use, showing its automatic foam dispensing feature.
Maintenance
- Regular Cleaning: Clean the dispenser regularly to ensure optimal performance and longevity. Wipe the exterior with a soft, damp cloth.
- Internal Cleaning: To prevent clogging, especially when changing soap types or if the dispenser is not used for an extended period, add warm water to the soap tank and pump it out several times. This flushes the internal mechanism.
- Battery Replacement: When the batteries are low, the indicator light may change color (e.g., turn red) or the dispenser may stop functioning. Replace all three AA batteries simultaneously.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No foam dispensed | Low batteries, clogged nozzle, incorrect soap dilution, empty soap tank. | Check and replace batteries. Ensure soap tank is filled. Verify soap is diluted correctly (1:4 ratio for liquid soap). Perform internal cleaning with warm water to clear any clogs. |
| Indicator light is red/flashing | Low battery power. | Replace all three 1.5V AA batteries. |
| Dispenser activates unintentionally | Sensor interference, placement too close to objects. | Ensure the dispenser is placed in an area free from direct sunlight or strong artificial light. Keep it away from reflective surfaces or objects that might trigger the sensor. Turn off the dispenser using the power button if cleaning around it. |
Specifications
- Model Number: JS001-1US
- Brand: LAOPAO
- Color: White
- Material: Plastic
- Product Dimensions: 3.68"L x 3.68"W x 7"H
- Liquid Volume: 240 Milliliters
- Power Source: 3 x 1.5V AA Batteries (not included)
- Material Type Free: Cadmium Free
Warranty and Support
The LAOPAO Automatic Hands Free Foaming Soap Dispenser is covered by a 12-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use. For warranty claims, technical support, or any questions regarding your product, please contact LAOPAO customer service through your retailer or the official LAOPAO website. Please retain your proof of purchase for warranty validation.