Fitkit FT100S Plus Series DC-Motorised Treadmill User Manual

Introduction

Thank you for choosing the Fitkit FT100S Plus Series DC-Motorised Treadmill. This manual provides essential information for the safe and efficient use, assembly, operation, and maintenance of your treadmill. Please read this manual thoroughly before using the equipment and retain it for future reference.

Safety Information

To ensure your safety and prolong the life of your treadmill, please observe the following precautions:

• Always consult with a physician before starting any new exercise program.
• Place the treadmill on a flat, stable surface with adequate clearance around it (at least 2 meters at the rear and 0.6 meters on each side).
• Keep children and pets away from the treadmill during operation.
• Wear appropriate athletic footwear and clothing. Avoid loose clothing that could get caught in moving parts.
• Use the safety key at all times. Attach the clip to your clothing before starting your workout. In case of an emergency, the safety key will stop the treadmill.
• Do not operate the treadmill if it is damaged or malfunctioning. Contact customer support immediately.
• Do not exceed the maximum user weight of 110 kg.
• Ensure the power cord is not pinched or damaged and is connected to a grounded outlet.
• Unplug the treadmill from the power source when not in use or before cleaning and maintenance.

Product Overview

Key Features

• Motor: 1.75HP Continuous (3.25HP Peak) DC-Motorised
• Speed Range: 0.8 - 14 Km/Hr
• Maximum User Weight: 110 kg
• Inclination Type: Manual Incline, 2 Levels
• Running Belt Size: 48.03 inches X 16.53 inches
• Display: LCD Display Console with Bluetooth Connectivity
• Special Features: Easy Lubrication, Handheld Heart Rate Monitoring, Anti-Skid Running Surface, Hydraulic Folding System, Wheels for Easy Storage

This diagram illustrates the key features and dimensions of the Fitkit FT100S Plus Treadmill, including motor power, inclination level, maximum user weight, lubrication method, speed range, and running area size.

This image points out various features of the FT100S Plus Treadmill, such as the bottle/phone holder, handheld heart rate monitoring, anti-skid running surface, and wheels for easy storage.

Components Diagram

This diagram identifies the main components of the Fitkit FT100S Plus Treadmill, including the console, LCD display, safety key, heart rate sensor, upright column, motor cover, running belt, end cap, and side rail.

Package Contents

Upon unpacking, ensure all the following items are present:

• 1 x Fitkit FT100S Plus Series Treadmill
• User Manual
• Tool Kit
• Warranty Card

Setup

The Fitkit FT100S Plus Series Treadmill is designed for minimal assembly. Professional home installation is typically provided. Follow these steps for initial setup:

1. Unpacking: Carefully remove the treadmill from its packaging. Retain packaging materials for potential future transport or service.
2. Placement: Position the treadmill on a firm, level surface. Ensure there is at least 2 meters of clear space behind the treadmill and 0.6 meters on each side for safe operation and access.
3. Unfolding (if applicable): If the treadmill is in a folded position, carefully lower the running deck until it locks into place. Refer to the hydraulic folding system instructions for safe unfolding.
4. Power Connection: Plug the power cord into a dedicated, grounded electrical outlet. Ensure the power switch on the treadmill is in the OFF position before plugging it in.
5. Inspection: Before first use, visually inspect the treadmill for any signs of damage or loose parts. Ensure the running belt is centered and tensioned correctly.

This image shows a side view of the Fitkit FT100S Plus Series Treadmill, highlighting its overall design and dimensions, ready for use.

Operating Instructions

Console Functions

A close-up view of the treadmill's LCD display console, showing the control panel with buttons for speed adjustment, start/stop, and the safety key attachment point.

The LCD display console provides real-time feedback on your workout. It typically displays metrics such as Speed, Time, Distance, and Calories Burned. The console also features buttons for controlling the treadmill's functions.

Starting a Workout

1. Ensure the treadmill is plugged in and the power switch is ON.
2. Attach the safety key clip to your clothing and place the magnetic end onto the designated area on the console. The treadmill will not operate without the safety key in place.
3. Step onto the side rails of the treadmill. Do not stand on the running belt when starting.
4. Press the 'START' button on the console. The belt will begin to move at a low speed.
5. Carefully step onto the running belt and begin walking.

Adjusting Speed and Incline

• Speed: Use the '+' and '-' buttons on the console to increase or decrease the running speed. Quick speed buttons (e.g., 3, 6, 9, 12 Km/Hr) may also be available for direct speed selection.
• Incline: The FT100S Plus features manual incline adjustment. To change the incline, stop the treadmill, step off, and manually adjust the incline levels at the rear of the treadmill according to the instructions provided in the toolkit.

Using the Safety Key

The safety key is a critical safety feature. If the safety key is removed from the console during operation, the treadmill will immediately stop, preventing potential injury. Always use the safety key.

Heart Rate Monitoring

To monitor your heart rate, grip the heart rate sensors on the handlebars with both hands. Your heart rate will be displayed on the console after a few seconds. Ensure your hands are clean and firmly placed on the sensors for an accurate reading.

Stopping a Workout

To stop the treadmill, press the 'STOP' button on the console. The belt will gradually slow down and come to a complete stop. Alternatively, pull the safety key to immediately stop the treadmill.

Folding and Storage

The treadmill features a hydraulic folding system for convenient storage. To fold:

1. Ensure the treadmill is stopped and unplugged.
2. Lift the running deck from the rear until it locks into an upright position. The hydraulic system will assist in this process.
3. To unfold, gently push the running deck release mechanism and slowly lower the deck until it rests on the floor.

The image demonstrates the treadmill in its folded position, illustrating the hydraulic folding system for space-saving storage.

Maintenance

Regular maintenance ensures optimal performance and longevity of your treadmill.

Cleaning

• Always unplug the treadmill before cleaning.
• Wipe down the console and exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents.
• Periodically vacuum underneath the treadmill to prevent dust and debris buildup from affecting motor performance.

Lubrication

The Fitkit FT100S Plus features easy lubrication. The running belt requires periodic lubrication to reduce friction and wear. Refer to the specific instructions provided with your lubrication kit for the correct procedure and frequency. Typically, this involves applying silicone lubricant under the running belt.

Running Belt Adjustment

Over time, the running belt may become off-center or loose. Refer to the toolkit instructions for adjusting the belt tension and centering. This usually involves using an Allen wrench to turn the adjustment bolts at the rear of the treadmill.

Troubleshooting

This section addresses common issues you might encounter. For problems not listed here, please contact customer support.

Specifications

Technical specifications for the Fitkit FT100S Plus Series DC-Motorised Treadmill:

Warranty and Support

Your Fitkit FT100S Plus Series Treadmill comes with a warranty. Please refer to the included Warranty Card for detailed terms and conditions, including coverage period and what is covered.

For any technical assistance, service requests, or warranty claims, please contact Fitkit customer support:

• Customer Service Number: 1800-572-6402 (Shoora Retail)
• Manufacturer Contact: +91 15268689027 (YONGKANG MIJIA IMPORT AND EXPORT CO.,LTD)

Please have your product model (FT100S Plus) and purchase details ready when contacting support.

Product Videos

No official product videos from the seller are available for embedding at this time.