ULANZI MT-09 GoPro Vlog Tripod Instruction Manual

Introduction

The ULANZI MT-09 is a versatile accessory designed for GoPro and other action cameras, functioning as both a compact table tripod and an extendable hand grip or selfie stick. Its lightweight and portable design makes it an ideal companion for vlogging, photography, and on-the-go content creation, offering stability and extended reach when needed.

What's in the Box

• ULANZI MT-09 Tripod
• GoPro Mounting Screw

Product Features

• Universal Compatibility: Equipped with a standard GoPro mount and screw, allowing attachment of most action cameras.
• Ideal for Vlogging: Functions as a stable table tripod for stationary filming or extends into a selfie stick for dynamic vlogging.
• Adjustable Height: Extends up to 25 centimeters (approximately 9.8 inches) for varied shooting perspectives. Folds down to a compact 12.7 centimeters (5 inches) for easy portability.
• Durable and Lightweight Construction: Crafted from lightweight plastic and aluminum, weighing only 65 grams (2.29 ounces) while maintaining robust stability.
• Enhanced Grip: The legs feature a ribbed texture, providing superior grip when used as a handheld device.

Setup and Assembly

Attaching Your Camera

1. Locate the GoPro mount at the top of the ULANZI MT-09.
2. Align your GoPro or compatible action camera with the mount.
3. Insert the provided mounting screw through your camera's mounting tabs and into the tripod's mount.
4. Tighten the screw securely to ensure your camera is firmly attached and stable.

Figure 1: The ULANZI MT-09 in its compact, folded state, ready to be used as a hand grip or stored easily.

Converting to Tripod Mode

1. Gently spread the three legs at the base of the handle outwards until they form a stable tripod base.
2. Place the tripod on a flat, stable surface.

Figure 2: The ULANZI MT-09 set up as a stable tabletop tripod, ideal for stationary video recording or photography.

Converting to Hand Grip Mode

1. Fold the three legs together to form a compact handle. The ribbed texture provides extra grip.

Figure 3: The ULANZI MT-09 held comfortably in hand, showcasing its ergonomic design for stable handheld shooting.

Extending to Selfie Stick Mode

1. While in hand grip or tripod mode, pull the top section of the tripod upwards to extend the pole.
2. The pole can extend up to 25 cm (approximately 9.8 inches).

Figure 4: The ULANZI MT-09 extended as a selfie stick, allowing for wider shots and self-filming with an action camera.

Operating Instructions

Adjusting Camera Angle

• Loosen the mounting screw on the GoPro mount to adjust your camera's tilt angle.
• Tighten the screw once the desired angle is achieved to secure the camera position.

Using as a Tabletop Tripod

• Extend the legs and place the tripod on any flat, stable surface for stationary shots, time-lapses, or hands-free viewing.

Using as a Hand Grip

• Keep the legs folded together to utilize the MT-09 as a comfortable and stable hand grip for dynamic handheld footage. The ergonomic design and ribbed texture provide a secure hold.

Using as a Selfie Stick

• Extend the pole to capture wider angles, group shots, or self-portraits. Always ensure your camera is securely mounted before extending the pole.

Maintenance

• Cleaning: Wipe the tripod with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish.
• Storage: Store the tripod in a dry place away from direct sunlight and extreme temperatures to prevent material degradation.
• Inspection: Periodically check all screws, joints, and moving parts for tightness and any signs of wear or damage. Tighten any loose screws as needed.

Troubleshooting

• Camera feels loose on mount: Ensure the GoPro mounting screw is fully tightened. If the issue persists, check for any obstructions or damage to the mount.
• Tripod is unstable in tabletop mode: Verify that all three legs are fully spread and locked into position. Ensure the tripod is placed on a flat, level, and stable surface.
• Extension pole is difficult to extend or retract: Gently twist and pull/push the extension pole. Avoid forcing it. Check for any dirt or debris that might be causing friction and clean if necessary.

Specifications

Warranty and Support

The ULANZI MT-09 comes with a 1-year warranty from the date of purchase.

For technical support, warranty claims, or any product-related inquiries, please contact ULANZI customer service through their official website or the retailer from whom the product was purchased. Please retain your proof of purchase for warranty validation.