Lorelli Matrix Neo Convertible Baby Crib

1. Product Overview

The Lorelli Matrix Neo Convertible Baby Crib is a versatile piece of nursery furniture designed to adapt as your child grows. It features a sturdy construction with two integrated drawers for storage and a two-level adjustable mattress base. This crib can be converted from a baby crib to a toddler bed or a sofa for a child's room by removing the side bars.

Image 1.1: The Lorelli Matrix Neo Convertible Baby Crib in its standard crib configuration, featuring white bars, pink accents, and two grey drawers at the base.

2. Safety Information

Please read and understand all safety warnings and instructions before assembling and using the Lorelli Matrix Neo Convertible Baby Crib. Failure to follow these instructions could result in serious injury or death.

• Maximum Weight: Do not exceed the recommended maximum weight of 56 kg for this crib.
• Mattress Size: Use only a mattress that is 1.20m x 60cm with a maximum thickness of 12cm. The mattress is not included with this product.
• Assembly: Ensure all parts are correctly assembled and tightened before use. Regularly check all screws and fittings to ensure they remain secure.
• Non-Toxic Materials: This product is made with non-toxic paints and high-quality 18mm melamine boards, complying with European safety standards EN 716 1-2-: 08.
• Hazards: Keep small parts, plastic bags, and packaging materials away from children to prevent choking or suffocation hazards.
• Placement: Do not place the crib near windows where cords from blinds or drapes could strangle a child. Do not place near heaters or open flames.
• Supervision: Never leave a child unattended in the crib.

3. Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Crib side panels (2)
• Crib end panels (2)
• Mattress base (1)
• Drawer components (2 sets)
• Hardware pack (screws, bolts, nuts, dowels, etc.)
• Assembly instructions manual

Note: A mattress is NOT included with this product and must be purchased separately. Ensure the mattress dimensions are 1.20m x 60cm with a maximum thickness of 12cm.

4. Setup and Assembly

Assembly of the Lorelli Matrix Neo Convertible Baby Crib requires two adults. Follow the detailed step-by-step instructions provided in the included manual for easy and quick installation. Ensure you have a clear, flat workspace.

4.1 Initial Crib Assembly

1. Unpack all components and lay them out on a soft, clean surface to prevent scratches.
2. Attach the side panels to the end panels using the provided hardware. Do not overtighten.
3. Install the mattress base. The base has two adjustable levels. For newborns, position the base at the higher level for easier access. For older infants who can sit up or pull themselves to a standing position, lower the mattress base to the lowest level to prevent them from climbing out.
4. Assemble the two drawers according to the separate drawer assembly instructions.
5. Slide the assembled drawers into the designated slots at the base of the crib. Ensure they operate smoothly and the locking mechanism functions correctly.
6. Once fully assembled, check all connections and tighten all screws securely.

Image 4.1: A closer view of the Lorelli Matrix Neo crib, highlighting the two spacious drawers at the bottom and the adjustable mattress base.

4.2 Converting to Toddler Bed / Sofa

The crib can be converted into a toddler bed or a sofa for a child's room. This transformation typically involves removing one or both of the side rail panels.

1. Ensure the mattress base is set to the lowest position for safety.
2. Carefully remove the screws and hardware securing one or both of the long side rail panels.
3. Store the removed panels and hardware in a safe place for future use, if you wish to convert it back to a crib.
4. For a toddler bed, one side rail is typically removed. For a sofa, both side rails are removed, leaving the headboard and footboard.

Image 4.2: The Lorelli Matrix Neo converted into a sofa configuration, showing the removal of the side rails while retaining the base drawers.

5. Operating Instructions

5.1 Adjusting the Mattress Base Height

The mattress base can be adjusted to two different heights to accommodate your child's developmental stages:

• Upper Level: Ideal for newborns and infants who cannot yet sit up or push themselves up on their hands and knees. This position reduces strain on your back when lifting the baby.
• Lower Level: Essential for older infants who can sit up, crawl, or pull themselves to a standing position. This prevents them from climbing out of the crib.

To adjust the height, remove the mattress and carefully detach the mattress base from its current position. Reattach it to the desired height using the designated hardware and ensure it is securely fastened at all four corners.

5.2 Using the Drawers

The two large drawers at the base of the crib provide convenient storage. They are equipped with a locking mechanism to keep them securely closed. To open, unlock the drawer (if locked) and pull the handle. To close, push the drawer fully in until it clicks into place, then engage the lock if desired.

6. Maintenance

Proper maintenance will ensure the longevity and safety of your Lorelli Matrix Neo Convertible Baby Crib.

• Cleaning: Wipe the crib surfaces with a dry, soft cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid abrasive cleaners or harsh chemicals.
• Hardware Check: Periodically check all screws, bolts, and other hardware to ensure they are tight and secure. Loose hardware can compromise the crib's stability and safety.
• Damage Inspection: Regularly inspect the crib for any signs of damage, such as cracks, splinters, or broken parts. Discontinue use immediately if any damage is found and contact customer support for replacement parts.
• Storage: If storing the crib, disassemble it carefully and store all parts and hardware in a dry, safe place.

7. Troubleshooting

This section addresses common issues you might encounter with your Lorelli Matrix Neo Convertible Baby Crib.

8. Specifications

9. Warranty Information

Lorelli products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Lorelli website. Keep your proof of purchase for any warranty claims.

10. Customer Support

If you have any questions, require assistance with assembly, or need replacement parts, please contact Lorelli customer support. Refer to the contact information provided in your product packaging or on the official Lorelli website.

When contacting support, please have your product model number (10150490032A) and purchase date readily available.