1. Introduction
Thank you for choosing the Ikea Vaxmyra LED Spotlight. This manual provides important information regarding the safe installation, operation, and maintenance of your new spotlight. Please read this manual thoroughly before installation and keep it for future reference.
The VAXMYRA spotlight is designed for use in cabinets and bookcases, offering versatile lighting solutions. It features easy mounting options with double-sided tape or screws, and includes matching cable trunking and a cover plate for mounting under glass shelves.
2. Safety Information
Always follow basic safety precautions when installing or using electrical products to reduce the risk of fire, electric shock, and personal injury.
- Read all instructions: Before installation and use.
- Indoor use only: This product is designed for indoor use in dry locations.
- Power source: Ensure the power source matches the requirements specified for the product.
- Professional installation: If you are unsure about installation, consult a qualified electrician.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners.
- Disposal: Dispose of the product according to local regulations for electronic waste.
3. Package Contents
Verify that all components are present before beginning installation.
- Ikea Vaxmyra LED Spotlight(s)
- Mounting hardware (screws, double-sided tape)
- Cable trunking
- Cover plate for glass shelves
- User Manual
Image: Two Ikea Vaxmyra LED Spotlights, showing their circular aluminum housing and attached power cables.
4. Setup and Installation
The Vaxmyra spotlight offers flexible installation options. Choose the method best suited for your furniture.
4.1. Before Installation
- Ensure the installation surface is clean, dry, and stable.
- Plan the placement of the spotlights and cable routing to ensure a neat and safe installation.
- Ensure power is disconnected from the circuit where you will be installing the lights.
4.2. Mounting with Double-Sided Tape
- Clean the mounting surface thoroughly to ensure optimal adhesion.
- Peel off the protective backing from the double-sided tape on the back of the spotlight.
- Press the spotlight firmly onto the desired surface for at least 30 seconds.
- Allow the adhesive to cure for a few hours before applying any stress to the light.
4.3. Mounting with Screws
- Mark the desired mounting location.
- If necessary, pre-drill small pilot holes for the screws.
- Secure the spotlight to the surface using the provided screws.
4.4. Cable Management
- Use the included cable trunking to neatly route and conceal the power cables.
- For glass shelves, utilize the provided cover plate to secure the cable and provide a finished look.
Image: Three Ikea Vaxmyra LED Spotlights installed under a wooden shelf, illuminating the area below.
Image: Multiple Ikea Vaxmyra LED Spotlights installed inside a glass display cabinet, highlighting items on the shelves.
5. Operating Instructions
The Ikea Vaxmyra LED Spotlight is designed for simple operation.
- Power Connection: Connect the spotlight(s) to a compatible power supply unit (sold separately or as part of a system).
- Control: This spotlight is typically controlled via a remote control or a wall switch connected to the power supply unit. Refer to the manual of your specific power supply or control system for detailed instructions.
- Light Output: The LED provides a consistent light output suitable for accent lighting in cabinets and bookcases.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Vaxmyra LED Spotlight.
- Cleaning: Disconnect the power before cleaning. Wipe the spotlight with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- LED Lifespan: The integrated LED light source has a long lifespan and is not replaceable. If the light stops functioning, the entire unit may need to be replaced.
- Inspection: Periodically inspect the cables and connections for any signs of damage or wear. If damage is found, discontinue use and consult a qualified technician.
7. Troubleshooting
If you encounter issues with your Vaxmyra LED Spotlight, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose connection; faulty power supply/switch. | Check if the power supply is connected and switched on. Ensure all cables are securely connected. Test with a different power supply or switch if available. |
| Light flickers. | Unstable power supply; loose connection. | Verify power supply stability. Check all connections for tightness. |
| Light is dim. | Incorrect power supply; dust accumulation on lens. | Ensure the power supply matches the spotlight's requirements. Clean the lens with a soft, dry cloth. |
If the problem persists after trying these solutions, contact Ikea customer support or a qualified electrician.
8. Specifications
- Model Number: 904.218.88
- Brand: Ikea
- Type: LED Spotlight
- Color: Aluminum
- Material: Aluminum
- Dimensions: Approximately 350 x 6.8 x 1 cm
- Power Source: Corded Electric (requires compatible power supply, sold separately)
- Installation Type: Flush Mount
- Control Method: Remote (via compatible system)
- Indoor/Outdoor Usage: Indoor
9. Warranty and Support
For information regarding warranty coverage, returns, or technical support, please refer to the official Ikea website or contact Ikea customer service directly. Keep your proof of purchase for warranty claims.
Ikea Official Website: www.ikea.com
