Globe Electric x Novogratz 51488 1-Light Wall Sconce Instruction Manual

1. Product Overview

The Globe Electric x Novogratz 51488 Wall Sconce offers a modern design with an oval backplate and a matte black finish, suitable for various interior styles. This versatile fixture can be installed as either a plug-in unit or hardwired directly into your electrical system, providing flexibility for placement and a clean aesthetic. It features a rocker switch for easy operation.

Key Features:

• Modern Design: Oval backplate and matte black finish complement diverse decors.
• Dual Installation: Offers both plug-in (with 6ft fabric covered cord) and hardwire options for convenience and a sleek look.
• Easy Operation: Equipped with a rocker switch for simple on/off control.
• Bulb Requirements: Requires 1x E26/Medium Base 60W Bulb (sold separately).
• Simple Installation: Includes all necessary mounting hardware for quick setup.

2. Safety Information

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or even fatal. Keep these instructions for future reference.

General Safety Precautions:

• Always disconnect power at the main circuit breaker before installation or maintenance.
• Consult a qualified electrician if you are unsure about the installation process.
• Use only the specified bulb type and wattage to avoid overheating.
• Do not install near flammable materials.
• This fixture is for indoor use only and is not water resistant.

3. Package Contents

Verify that all components are present and undamaged before proceeding with installation.

• Wall Sconce Fixture
• Instruction Sheet
• Mounting Hardware (screws, anchors)

Figure 1: Wall Sconce Components and Dimensions. Note the 6-foot cord and rocker switch for plug-in use.

4. Installation

The Globe Electric x Novogratz 51488 Wall Sconce offers two installation methods: plug-in or hardwire. Choose the method that best suits your needs.

4.1. Choosing Your Installation Method

• Plug-in: Ideal for renters or temporary setups. The fixture comes with a 6-foot fabric covered cord and a rocker switch for easy access. Simply mount the fixture and plug it into a standard wall outlet.
• Hardwire: For a permanent, cordless look. This method requires connecting the fixture directly to your home's electrical wiring. Professional installation is recommended for hardwiring.

4.2. Mounting Instructions

1. Prepare the Mounting Surface: Ensure the wall surface is clean and capable of supporting the fixture's weight.
2. Mark Mounting Points: Hold the sconce's backplate against the wall at the desired location. Use a pencil to mark the positions for the mounting screws.
3. Install Anchors (if needed): If mounting into drywall, drill pilot holes at the marked points and insert wall anchors.
4. Secure Backplate: Align the backplate with the installed anchors or studs and secure it firmly using the provided mounting screws.

Figure 2: Close-up of the sconce's backplate, showing mounting points.

4.3. Connecting Power

• For Plug-in Installation: Once the fixture is securely mounted, simply plug the 6-foot cord into a nearby electrical outlet.
• For Hardwire Installation: (Consult a qualified electrician) Carefully connect the fixture's wires to your home's electrical wiring according to local electrical codes. Ensure all connections are secure and insulated.

5. Operating Instructions

The wall sconce is designed for simple operation using its integrated rocker switch.

Turning On/Off:

• Locate the rocker switch on the fixture's cord (for plug-in) or on the fixture itself (if hardwired with an integrated switch).
• Press one side of the rocker switch to turn the light ON.
• Press the other side of the rocker switch to turn the light OFF.

Figure 3: Wall sconce in a bedroom setting, illustrating its use as a reading light.

6. Bulb Requirements

This fixture requires one (1) E26/Medium Base bulb with a maximum wattage of 60W. The bulb is sold separately.

• Bulb Type: E26 / Medium Base
• Maximum Wattage: 60 Watts
• Light Source: Compatible with LED or Incandescent E26 bulbs.

Note: Using a bulb with higher wattage than specified may cause overheating and damage to the fixture or create a fire hazard.

7. Maintenance

Regular maintenance will help preserve the appearance and functionality of your wall sconce.

Cleaning:

• Always ensure the power is disconnected before cleaning.
• Wipe the fixture with a soft, dry cloth.
• Do not use harsh chemicals, abrasive cleaners, or polishes as they may damage the finish.

Bulb Replacement:

• Ensure the fixture is turned off and cool to the touch before replacing the bulb.
• Carefully unscrew the old bulb and screw in the new E26/Medium Base 60W maximum bulb.

8. Troubleshooting

If you encounter issues with your wall sconce, refer to the following common problems and solutions:

• Light does not turn on:
  • Check if the bulb is securely screwed in.
  • Verify the bulb is not burnt out and replace if necessary.
  • Ensure the power outlet is functioning (for plug-in) or the circuit breaker is not tripped (for hardwire).
  • Confirm the rocker switch is in the 'ON' position.
• Light flickers:
  • Ensure the bulb is fully tightened.
  • Try a different bulb to rule out a faulty bulb.
  • Check for loose wiring connections (for hardwire, consult an electrician).

9. Specifications

10. Warranty and Support

This product comes with a Limited Warranty. For specific details regarding the warranty coverage, please refer to the documentation included in your product packaging or contact Globe Electric customer support.

For technical assistance, troubleshooting, or to inquire about replacement parts, please visit the official Globe Electric website or contact their customer service department.