HiLook THC-B150P 5MP 4-in-1 CCTV Bullet Camera User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the HiLook THC-B150P 5MP 4-in-1 CCTV Bullet Camera. This camera is designed for both indoor and outdoor surveillance, offering high-resolution video and versatile compatibility. Please read this manual thoroughly before using the product to ensure proper setup and functionality.

2. Safety Information

• Power Supply: Use only a regulated 12 VDC power supply. Ensure the power source meets the camera's requirements to prevent damage.
• Installation: Installation should be performed by qualified personnel in accordance with all local codes. Securely mount the camera to prevent it from falling.
• Environment: Avoid exposing the camera to extreme temperatures, humidity, or corrosive environments. While rated IP66 for weather resistance, direct submersion is not recommended.
• Cleaning: Do not use strong detergents or abrasive materials to clean the camera. Use a soft, dry cloth.
• Disassembly: Do not attempt to disassemble the camera. Unauthorized modifications will void the warranty.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your supplier immediately.

• HiLook THC-B150P 5MP 4-in-1 CCTV Bullet Camera
• Mounting Screws and Wall Plugs
• Quick Start Guide / User Manual (this document)
• Drill Template (may be included)

4. Product Overview

The HiLook THC-B150P is a high-performance bullet camera featuring a 5MP CMOS sensor and a 2.8mm fixed lens. It supports multiple video output formats (TVI/AHD/CVI/CVBS) for broad compatibility with various DVR systems. The camera includes EXIR 2.0 technology for enhanced night vision up to 20 meters and is rated IP66 for outdoor use.

Figure 4.1: Front view of the HiLook THC-B150P 5MP Bullet Camera, showing the lens and housing.

Figure 4.2: HiLook THC-B150P camera highlighting key features such as 4-in-1 video output, 5MP resolution, IP66 weather resistance, Smart IR, and Day/Night switch.

5. Setup and Installation

5.1 Mounting Location

Choose a suitable location for mounting the camera, considering the desired field of view, lighting conditions, and proximity to power and video cables. The camera is designed for wall mounting and can be used both indoors and outdoors due to its IP66 rating.

5.2 Installation Steps

1. Prepare the Mounting Surface: Use the provided drill template (if available) to mark the screw holes on the wall or ceiling.
2. Drill Holes: Drill pilot holes for the mounting screws. Insert wall plugs if mounting on masonry.
3. Secure the Camera: Attach the camera base to the mounting surface using the provided screws. Ensure it is firmly secured.
4. Adjust Angle: Loosen the adjustment screws on the camera bracket to position the camera for the desired viewing angle. Tighten the screws once the angle is set.

Figure 5.1: Side view of the HiLook THC-B150P camera, illustrating the adjustable bracket for precise positioning.

5.3 Wiring Connections

• Power Connection: Connect a 12 VDC power adapter to the camera's power input.
• Video Output: Connect the camera's video output cable to the corresponding input on your Digital Video Recorder (DVR) or other compatible video input device. The camera supports TVI, AHD, CVI, and CVBS video formats.

6. Operating Instructions

6.1 Powering On

Once all connections are made, apply power to the camera. The camera will initiate and begin transmitting video. Allow a few moments for the image to stabilize.

6.2 Video Output Mode Switching

The THC-B150P supports four video output formats: TVI, AHD, CVI, and CVBS. The default mode is typically TVI. To switch between modes, use the OSD menu (refer to Section 7) or a compatible UTC (Up The Coax) controller if your DVR supports it. Incorrect mode selection may result in no video or a distorted image.

6.3 Smart IR Functionality

The camera features Smart IR, which automatically adjusts the intensity of the infrared LEDs to prevent overexposure of objects closer to the camera, ensuring a balanced image in low-light conditions.

7. Configuration (OSD Menu)

The On-Screen Display (OSD) menu allows you to configure various camera settings. Access the OSD menu via your DVR's UTC control function (Up The Coax). Navigate the menu using the DVR's controls.

7.1 Key OSD Menu Options

• VIDEO FORMAT: Select the desired video output format (TVI, AHD, CVI, CVBS).
• EXPOSURE: Adjust settings like Shutter, AGC (Automatic Gain Control), and Brightness.
• WHITE BALANCE: Configure color temperature settings (e.g., Auto, Manual).
• DAY/NIGHT: Set the camera's mode for day, night, or auto-switching.
• DNR (Digital Noise Reduction): Reduce image noise in low-light conditions.
• IMAGE SETTINGS: Fine-tune sharpness, contrast, and saturation.
• RESET: Restore camera settings to factory defaults.

8. Maintenance

8.1 Cleaning

Regularly clean the camera lens and housing to ensure optimal image quality. Use a soft, lint-free cloth. For stubborn dirt, a slightly damp cloth with plain water can be used. Avoid chemical cleaners.

8.2 Environmental Considerations

Although the camera is IP66 rated, protecting it from direct, prolonged exposure to harsh weather conditions (e.g., heavy snow, direct hail) can extend its lifespan. Ensure proper drainage around the mounting area.

9. Troubleshooting

10. Specifications

11. Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official HiLook website. Technical support may be available through your local distributor or the HiLook support channels. Keep your purchase receipt for warranty claims.