Mastervolt PowerCombi Remote Control Panel User Manual

1. Product Overview

The Mastervolt PowerCombi Remote Control Panel (Model 77010700) is designed to provide comprehensive remote monitoring and control for your Mastervolt PowerCombi Inverter/Charger system. This ergonomic panel allows users to conveniently access and manage various system parameters from a central location, enhancing the usability and efficiency of your power system.

Figure 1: Front view of the Mastervolt PowerCombi Remote Control Panel, showing the LCD screen, 'UNIT' button, arrow navigation buttons, and other function buttons. Text labels for 'SHORE', 'UNIT', 'REMOTE', 'power', 'readings', 'setup', and 'settings' are visible on the right side of the display area.

Key features include a clear LCD display for real-time data, intuitive navigation buttons for easy menu access, and the ability to monitor power status, view system readings, adjust setup configurations, and modify settings for your PowerCombi unit.

2. Setup and Installation

This section provides guidelines for the proper installation of your Mastervolt PowerCombi Remote Control Panel. Ensure all power to the PowerCombi Inverter/Charger system is disconnected before beginning installation.

2.1 Package Contents

• Mastervolt PowerCombi Remote Control Panel (Model 77010700)
• Mounting hardware (screws, etc. - typically included)
• Connection cable (specific to PowerCombi system - typically included)

2.2 Mounting the Panel

1. Choose a suitable location for the panel. It should be easily accessible and visible, away from direct sunlight or excessive heat/moisture.
2. Ensure there is sufficient space behind the mounting surface for cable routing and connections. The panel dimensions are approximately 10 x 6 x 3 inches.
3. Cut an opening in the mounting surface according to the provided template (refer to the separate installation template, if supplied with the product).
4. Secure the panel using the supplied mounting screws.

2.3 Electrical Connection

The remote control panel connects directly to your Mastervolt PowerCombi Inverter/Charger. Use the dedicated communication cable provided by Mastervolt for this connection.

1. Locate the remote control port on your PowerCombi Inverter/Charger.
2. Connect one end of the communication cable to the remote control panel.
3. Connect the other end of the communication cable to the PowerCombi Inverter/Charger.
4. Ensure all connections are secure before restoring power to the system.

3. Operating Instructions

This section describes the basic operation of the Mastervolt PowerCombi Remote Control Panel.

3.1 Powering On/Off

The panel typically powers on automatically when the PowerCombi Inverter/Charger system is active. There is no separate power button on the panel itself.

3.2 Display and Navigation

The LCD display shows various system statuses and menu options. Navigation is primarily done using the arrow buttons and function buttons.

• UNIT Button: Press to cycle through different unit displays or modes.
• Up/Down Arrow Buttons: Used to scroll through menu options or adjust values.
• Left/Right Function Buttons: These buttons (depicted as square icons on the panel) are typically used for selection, confirmation, or going back in menus. Their exact function may vary depending on the displayed screen.

3.3 Monitoring System Status

The panel provides real-time information about your PowerCombi system. Common displays include:

• SHORE: Indicates status related to shore power connection.
• UNIT: Displays general status of the PowerCombi unit.
• REMOTE: Shows the status of the remote connection.
• Power: Real-time power output/input readings.
• Readings: Detailed electrical readings (voltage, current, frequency, etc.).

3.4 Accessing Setup and Settings

Navigate to the "setup" or "settings" menu using the arrow buttons and select with the appropriate function button. Within these menus, you can configure various parameters of your PowerCombi system. Refer to your PowerCombi Inverter/Charger manual for specific setting details.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your remote control panel.

4.1 Cleaning

• Wipe the panel surface with a soft, damp cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic material and display.
• Ensure no liquid enters the panel openings.

4.2 Storage

If the panel is to be stored for an extended period, disconnect it from the PowerCombi system and store it in a dry, cool environment, away from direct sunlight and extreme temperatures.

5. Troubleshooting

This section addresses common issues you might encounter with your remote control panel.

For issues not listed here, or if the suggested solutions do not resolve the problem, please contact Mastervolt customer support.

6. Specifications

7. Warranty and Support

The Mastervolt PowerCombi Remote Control Panel comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty documentation included with your product or visit the official Mastervolt website.

For technical support, service, or warranty claims, please contact Mastervolt customer service:

• Manufacturer: Mastervolt
• Website: www.mastervolt.com (Please check the official website for the most current contact information and support resources.)

When contacting support, please have your product model number (77010700) and purchase information readily available.