1. Introduction and Overview
The Behringer WING 48-channel Digital Mixer is a state-of-the-art personal mixing console designed for professional audio applications. It features a unique touch-sensitive channel editing section with 11 rotary controls and a dedicated color TFT display, allowing for intuitive control over all channel properties. This manual provides essential information for setting up, operating, and maintaining your WING mixer.
Figure 1.1: Top view of the Behringer WING Digital Mixer, showcasing the main control surface and integrated display.
Figure 1.2: Angled view of the Behringer WING Digital Mixer, highlighting the ergonomic design and fader banks.
2. Key Features
- 48-stereo-channel Digital Mixer with Touchscreen
- 48-in/48-out USB Audio Interface
- 16 Stereo Digital FX Processors
- 8 MIDAS Pro Preamps
- 24 Motorized Faders
3. Setup
Follow these steps to set up your Behringer WING Digital Mixer:
- Unpacking and Inspection: Carefully remove the mixer from its packaging. Inspect for any signs of damage during transit. Retain all packaging materials for future transport or storage.
- Power Connection: Connect the supplied power cable to the AC input on the rear panel of the WING mixer. Ensure the power switch is in the OFF position before connecting to a power outlet. The WING operates on 2.4E+2 Volts (AC).
- Initial Power On: Press the power switch to turn on the mixer. Allow the system to boot up completely. The touch-sensitive display will illuminate.
- Connectivity: Utilize the USB hardware interface for connection to a computer for audio recording and playback. The WING supports 48-in/48-out USB audio.
- Input/Output Connections: Connect microphones, instruments, and other audio sources to the available input channels. Connect main outputs to your amplification system or recording devices. The mixer features 8 MIDAS Pro Preamps for high-quality audio input.
Figure 3.1: Rear panel of the Behringer WING Digital Mixer, showing various input and output connections, including the expansion slot.
Figure 3.2: Angled view of the rear panel, providing a clearer look at the connectivity options and power input.
4. Operating the Mixer
The Behringer WING is designed for intuitive operation through its advanced interface:
- Touchscreen Interface: The 10-inch touch-sensitive display is the primary interface for controlling the WING mixer. Navigate through menus by tapping icons and swiping across the screen.
- Channel Editing: Select a channel on the console to access its dedicated editing section on the display. Adjust parameters such as EQ, dynamics, and effects using the 11 rotary controls and the touch screen.
- Motorized Faders: The 24 motorized faders provide tactile control over channel levels and bus sends. Fader positions will automatically update to reflect selected layers or scene recalls.
- Effects Processing: Access the 16 stereo digital FX processors through the effects menu on the touchscreen. Apply various effects to individual channels or bus mixes.
- Routing: Configure audio routing for inputs, outputs, and internal buses using the routing section of the display. The WING offers extensive routing flexibility for complex setups.
Figure 4.1: Top-down view of the Behringer WING Digital Mixer, illustrating the layout of faders, buttons, and the central touchscreen for operational control.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Behringer WING mixer:
- Cleaning: Regularly clean the exterior of the mixer, especially the touchscreen and faders, with a soft, dry, lint-free cloth. Avoid abrasive cleaners or solvents that could damage the surface.
- Firmware Updates: Periodically check the Behringer website for firmware updates. Keeping the firmware current ensures optimal performance and access to new features.
- Environmental Conditions: Operate the mixer in a clean, dry environment, away from excessive dust, moisture, and extreme temperatures. Ensure adequate ventilation to prevent overheating.
6. Troubleshooting
This section addresses common issues you might encounter with your WING mixer:
- No Power: If the unit does not power on, verify the power cable is securely connected to both the mixer and the power outlet. Check the power source for functionality.
- No Audio Output: Ensure all input sources are connected correctly and gain levels are appropriately set. Verify main output connections and fader levels. Check routing settings on the touchscreen to ensure signals are directed to the desired outputs.
- Touchscreen Unresponsive: If the touchscreen becomes unresponsive, try restarting the mixer. If the issue persists, consult the Behringer support resources.
- Connectivity Issues (USB/Network): For USB audio interface problems, ensure the correct drivers are installed on your computer. For network issues, verify cable connections and network settings on the mixer and connected devices.
7. Specifications
| Attribute | Value |
|---|---|
| Item Weight | 72.4 pounds |
| Product Dimensions | 39 x 27 x 13 inches |
| ASIN | B082YG37S9 |
| Item Model Number | WING |
| Hardware Interface | USB |
| Power Source | Corded Electric |
| Voltage | 2.4E+2 Volts (AC) |
| Brand | Behringer |
| Number of Channels | 48 |
| Connectivity Technology | USB |
| Date First Available | December 23, 2019 |
8. What's in the Box
- 1 x Behringer WING 48-Channel, 28-Bus Full Stereo Digital Mixer
- 1 x Power Cable
- 1 x User Manual (this document)
9. Warranty and Support
Warranty Information: This product may be eligible for extended protection plans. Please refer to your purchase documentation or contact your retailer for details on available 2-Year and 3-Year Protection Plans.
Customer Support: For technical assistance, product registration, or further inquiries, please visit the official Behringer Store or contact their customer support.
