1. Introduction
The ECHZOVE Keyboard and Mouse Adapter is designed to convert keyboard and mouse signals into controller signals, enabling enhanced game control for various gaming platforms. This adapter provides a versatile solution for players who prefer keyboard and mouse input over traditional controllers.
2. Product Features
- Converts keyboard and mouse signals to controller signals for improved game control.
- Supports Nintendo Switch, PS4, Xbox One, PS3, and Xbox 360 platforms.
- Allows custom key mapping: any key on the keyboard and mouse can be assigned to any button on the controller.
- Compact and portable design.
- Supports program upgrades for future compatibility and enhancements.
3. Package Contents
- ECHZOVE Keyboard and Mouse Adapter
- User Manual (this document)
4. Setup Guide
4.1 Initial Connection
To begin, connect the adapter to your console. For Nintendo Switch, ensure it is connected to the dock's rear USB port for sufficient power. For other consoles, connect directly to an available USB port.
Once connected, the converter lights will illuminate with a white light, indicating power. Next, connect your authorized game controller (e.g., NS authorization controller, PS4 controller, Xbox controller) to the adapter's designated port. The white light next to the controller port will light up.
4.2 Connecting Peripherals
After the controller is connected, plug your keyboard into the USB keyboard socket. The red indicator light will turn on. Then, connect your wired mouse to the Mouse USB port, and the green indicator light will illuminate.
For optimal performance, ensure all connections are secure. The adapter supports various console platforms as shown in the connection method diagrams below.
4.3 Visual Setup Guide
Watch this official video for a visual demonstration of the setup process and device connection.
Video 1: Official setup guide for the ECHZOVE Keyboard and Mouse Adapter, demonstrating simple connection and device pairing.
5. Operating Instructions
5.1 Indicator Lights
The adapter features various indicator lights to show connection status and mode:
- White Light: Connect game console indicator.
- Red Light: Connect keyboard indicator.
- Green Light: Connect mouse indicator.
- Blue Light: Setup indicator.
- Colorful Light: Setting storage page indicator.
5.2 Key Mapping
The adapter allows for custom key mapping. To enter mapping mode, press F11 + F12 simultaneously on your connected keyboard. The adapter's blue light should illuminate, indicating it is in setup mode. While in this mode, you can assign any keyboard or mouse input to a corresponding controller button. Refer to the detailed instruction manual (PDF) for specific steps on custom setup.
5.3 Multi-Platform Compatibility
The ECHZOVE adapter is designed to work across multiple gaming platforms, providing a consistent keyboard and mouse experience. Ensure your console's settings allow for wired controller communication if applicable.
6. Maintenance
To ensure the longevity and optimal performance of your ECHZOVE Keyboard and Mouse Adapter, follow these simple maintenance guidelines:
- Keep the adapter clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid dropping or subjecting the adapter to strong impacts.
- Do not attempt to disassemble or repair the adapter yourself, as this will void any potential support.
7. Troubleshooting
If you encounter issues with your ECHZOVE Keyboard and Mouse Adapter, please refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Adapter not powering on / No white light. | Ensure the adapter is securely plugged into a powered USB port. For Nintendo Switch, use the USB port on the back of the dock, as side ports may not provide sufficient power. |
| Keyboard/Mouse not responding in-game (Nintendo Switch). | Ensure your Joy-Cons are disconnected from the Switch console before launching the game. The adapter requires the console to recognize the wired controller input. |
| Mouse micro-movements not registering or feeling off. | This can occur with very small mouse movements. Adjusting in-game sensitivity or mouse DPI settings may help. Some games may have inherent limitations with mouse input via adapters. |
| Key mapping setup mode (F11+F12) not activating. | Ensure both F11 and F12 keys are pressed simultaneously and held briefly. Verify your keyboard is fully recognized by the adapter. If the blue light does not appear, try reconnecting the keyboard and adapter. |
| Adapter not working with Nintendo Switch OLED model. | Some users have reported compatibility issues with the Switch OLED model, specifically with the wired controller connection. Ensure the wired controller is functioning correctly directly with the console. If issues persist, contact customer support. |
| Input delay noticed during gameplay. | While the adapter is designed for low input delay, some minimal delay can occur depending on the game, console, and display. Ensure your display is in game mode if available. |
8. Specifications
| Attribute | Value |
|---|---|
| Product Dimensions | 5.8 x 2.7 x 1 inches |
| Item Weight | 1.58 ounces |
| Model Number | Keyboard and Mouse Adapter |
| ASIN | B082XYX8RW |
| Color | Black |
| Manufacturer | ECHZOVE |
| Compatible Devices | Nintendo Switch, PS4, Xbox One, PS3, Xbox 360 |
| Connector Type | USB Type A (for console connection), USB Type A (for peripherals) |
9. Warranty and Support
ECHZOVE is committed to customer satisfaction. If you encounter any issues or have questions regarding your Keyboard and Mouse Adapter, please do not hesitate to contact us. We offer 24-hour online service to ensure you are satisfied with your product.
For further detailed instructions and support, you may also refer to the official User Guide PDF: Download User Guide (PDF)
