Introduction
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your Mophorn Wood Lathe. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.
Safety Instructions
WARNING: Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury.
- Read and understand all instructions before operating the lathe.
- Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and a dust mask.
- Ensure the work area is clean, well-lit, and free from obstructions.
- Keep children and bystanders away from the operating machine.
- Do not operate the machine in damp or wet locations.
- Always disconnect power before making adjustments, changing accessories, or performing maintenance.
- Securely fasten the workpiece before turning.
- Never wear loose clothing, gloves, or jewelry that could get caught in moving parts.
- Use only recommended accessories and attachments.
- Maintain the machine in good working condition. Inspect for damaged parts before each use.
Product Overview
The Mophorn Wood Lathe is designed for high-speed sanding and polishing of various wooden items. It features a robust motor and adjustable speed settings for versatile applications.
Figure 1: Mophorn Wood Lathe with various accessories including chisels and wrenches.
Key Features:
- 400W Motor: Provides smooth startup and powerful operation with low noise.
- Adjustable Speed Settings: Four speed settings (1100, 1600, 2300, 3400 RPM) for various turning needs.
- Large Working Capacity: 1000mm (40 inches) distance between centers, and 350mm (14 inches) swing over bed.
- Solid Steel Construction: Ensures durability, strength, stability, and reduced vibration.
- Humanized Design: Features a removable tailstock and 360° rotating tool post for flexibility.
Setup
Unpacking and Inspection:
Carefully remove all components from the packaging. Inspect for any damage that may have occurred during shipping. Report any damage immediately to your supplier.
Assembly:
- Mounting the Lathe: Securely mount the lathe to a sturdy workbench using appropriate bolts and washers. Ensure the workbench can support the weight and vibrations of the lathe during operation.
- Attaching the Tool Rest: Insert the tool rest into its designated slot and tighten the locking mechanism. Adjust its height and position as needed for your workpiece.
- Installing the Tailstock: Slide the tailstock onto the bedways and lock it in place. The tailstock is removable for convenience.
- Power Connection: Connect the power cord to a suitable 220V power outlet. Ensure the power switch is in the "OFF" position before plugging in.
Figure 2: Humanized design features including removable tailstock and 360° rotating tool post.
Operating Instructions
Preparing the Workpiece:
Ensure your wooden workpiece is properly prepared and balanced before mounting. Mark the center points on both ends of the workpiece.
Mounting the Workpiece:
- Insert the drive center into the headstock spindle.
- Place one end of the workpiece onto the drive center.
- Bring the tailstock forward until the live center engages with the other end of the workpiece.
- Tighten the tailstock quill to secure the workpiece firmly between the centers. Ensure it is snug but not overtightened.
Adjusting Speed:
The lathe offers four speed settings (1100, 1600, 2300, 3400 RPM) which are adjusted manually by changing the belt position on the pulleys. Always ensure the power is OFF before adjusting the speed.
- Step 1: Open the belt cover on the headstock.
- Step 2: Loosen the screws that secure the motor.
- Step 3: Raise the motor pulley to loosen the belt tension.
- Step 4: Move the belt to the desired pulley combination for the target RPM. Refer to the diagram for pulley positions corresponding to each speed.
- Step 5: Lower the motor pulley to tension the belt, then tighten the motor screws and close the cover.
Figure 3: Steps for adjusting the lathe speed by changing belt position.
Turning Operation:
- Ensure the workpiece is securely mounted and the tool rest is positioned correctly, close to the workpiece but not touching it.
- Turn on the power switch. Allow the lathe to reach full speed before beginning to cut.
- Using appropriate turning chisels (e.g., skew chisel, gouge, scraper), gently bring the tool into contact with the rotating workpiece.
- Apply steady, controlled pressure, moving the tool smoothly along the tool rest to shape the wood.
- Periodically check the workpiece for concentricity and desired shape.
- When finished, turn off the lathe and wait for the workpiece to stop completely before removing it.
Maintenance
Regular Cleaning:
After each use, clean the lathe thoroughly to remove wood dust and chips. Use a brush or vacuum cleaner. Do not use compressed air as it can force dust into bearings.
Lubrication:
Periodically apply a light machine oil to the bedways and other moving parts to ensure smooth operation and prevent rust.
Belt Inspection:
Regularly inspect the drive belt for wear, cracks, or stretching. Replace the belt if any damage is observed to maintain optimal performance and prevent slippage.
Tool Sharpening:
Keep your turning chisels sharp. Dull tools can cause excessive vibration, poor cuts, and increased risk of kickback.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lathe does not start | No power supply; Power switch off; Motor overload protection tripped | Check power connection; Turn on power switch; Reset overload protector (if applicable) |
| Excessive vibration during operation | Workpiece unbalanced; Workpiece not securely mounted; Loose components; Worn belt | Rebalance workpiece; Re-secure workpiece; Tighten all fasteners; Inspect and replace belt |
| Motor overheating | Overloading the motor; Insufficient ventilation | Reduce load; Ensure proper airflow around motor; Allow motor to cool down |
| Difficulty changing speeds | Belt too tight; Pulleys dirty | Loosen motor mounting screws before adjusting belt; Clean pulleys and belt |
Specifications
| Feature | Specification |
|---|---|
| Model Number | mini Drechselbank 1100-3400 U/min |
| Motor Power | 400 W |
| Voltage | 220 V |
| Spindle Speeds | 1100, 1600, 2300, 3400 RPM (4 adjustable speeds) |
| Swing Over Bed (Max. Diameter) | 350 mm (14 inches) |
| Distance Between Centers (Max. Length) | 1000 mm (40 inches) |
| Tool Rest Length | 150 mm |
| Face Plate Diameter | 140 mm |
| Product Dimensions (L x W x H) | 93.98 x 42.93 x 27.94 cm (37 x 16.9 x 11 inches) |
| Product Weight | 24.04 kg (53.0 lbs) |
Figure 4: Product dimensions of the Mophorn Wood Lathe.
Warranty and Support
Warranty Information:
This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation or contact the seller for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.
Customer Support:
For technical assistance, spare parts, or any questions regarding your Mophorn Wood Lathe, please contact Mophorn customer support or the retailer from whom you purchased the product. Provide your model number and purchase date when contacting support.
Seller: MR DISTRI BE
Amazon Product Link: Mophorn Wood Lathe on Amazon.com.be
