Introduction
This manual provides essential information for the safe and effective use of your SupplySource 19.5V 3.33A 65W AC Adapter. This adapter is designed to provide reliable power to compatible HP devices, including those requiring Realtek RTL8723DE 927230-855 915619-001 power specifications. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
To prevent electric shock, fire, or damage to the product, please observe the following safety precautions:
- Ensure the DC output voltage and tip size of the AC adapter match your device's requirements before connecting. Incorrect voltage or tip size can damage your device.
- Do not expose the adapter to water, rain, or excessive moisture.
- Avoid using the adapter in extremely hot or cold environments. Ensure adequate ventilation around the adapter during operation to prevent overheating. Do not place it on soft surfaces like carpets or bedding that can block ventilation openings.
- Do not disassemble, modify, or attempt to repair the adapter. Refer all servicing to qualified personnel.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the adapter.
- Unplug the adapter from the power outlet when not in use for extended periods.
- This adapter is equipped with multiple safety features including stable output voltage, automatic overload cut-off, over voltage cut-off, automatic thermal cut-off, and short circuit protection.
Package Contents
Verify that all items are present in your package:
- SupplySource 19.5V 3.33A 65W AC Adapter Unit
- Power Cord
- Note: The product description mentions "2 x USB Cable" as included components. Please check your package for these additional items if applicable.
Specifications
| Feature | Detail |
|---|---|
| Brand | SupplySource |
| Model Number | PSS/1216/035 |
| Input Voltage Range | 100-240V AC |
| Input Frequency | 50-60Hz |
| Output Voltage | 19.5V DC |
| Output Current | 3.33A |
| Output Wattage | 65W |
| Connector Type | Barrel Connector |
| Compatible Devices | HP devices requiring 19.5V 3.33A 65W power, including Realtek RTL8723DE 927230-855 915619-001 specifications. |
| Safety Certifications | CE, FCC |
| Material | Flame retardant ABS and PC synthetic materials (shell), 3x0.5 mm copper core (power cord) |
Product Features Overview

Internal Safety Features: The adapter is engineered with advanced internal circuitry to ensure stable output voltage. It incorporates automatic cut-off mechanisms for overload, over voltage, and thermal protection, alongside robust short circuit protection. These features safeguard both the adapter and your connected device from potential electrical damage.

Durable Power Cord: The included power cord is constructed with a high-quality 3x0.5 mm copper core. This material choice enhances conductivity and provides excellent resistance against oxidation and corrosion, ensuring a long lifespan and reliable power delivery.

Robust Casing: The power supply's outer shell is manufactured from flame retardant and high-temperature resistant ABS (Acrylonitrile Butadiene Styrene) and PC (Polycarbonate) synthetic materials. This robust construction provides superior strength and wear resistance, protecting the internal components and ensuring durability.
Setup
- Verify Compatibility: Before connecting, confirm that your device requires a 19.5V output, 3.33A current, and 65W power, and that the barrel connector tip size matches your device's input port.
- Connect Power Cord: Insert the C5/C7 end of the power cord firmly into the AC input port on the adapter unit.
- Connect to Wall Outlet: Plug the other end of the power cord (standard US plug) into a grounded electrical wall outlet.
- Connect to Device: Carefully insert the barrel connector from the adapter unit into the power input port of your compatible HP device.
- Power On: Once connected, your device should begin charging or power on.
Operating
- Use the adapter only with devices that match its voltage, amperage, and connector specifications.
- Avoid bending or twisting the power cord excessively, as this can damage the internal wiring.
- If the adapter feels unusually hot to the touch, disconnect it immediately and allow it to cool down. Ensure it is in a well-ventilated area.
- Do not cover the adapter with clothing, blankets, or other materials during operation.
Maintenance
- Cleaning: Disconnect the adapter from both the wall outlet and your device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly winding the cables.
- Inspection: Periodically inspect the adapter and power cord for any signs of damage, such as frayed wires, cracked casing, or bent pins. If damage is found, discontinue use and replace the adapter.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on/charging | 1. Adapter not properly connected. 2. Wall outlet not functioning. 3. Incompatible adapter. 4. Damaged adapter or cable. | 1. Ensure all connections are secure. 2. Test the outlet with another device. 3. Verify adapter specifications match device requirements. 4. Inspect for damage; replace if necessary. |
| Adapter is unusually hot | 1. Poor ventilation. 2. Overload. 3. Internal fault. | 1. Ensure adapter is in a well-ventilated area, not covered. 2. Disconnect and allow to cool. Ensure device power draw is within adapter limits. 3. Discontinue use and replace. |
| Sparking at outlet | Faulty outlet or adapter. | Immediately unplug. Do not use the outlet or adapter. Consult an electrician or replace the adapter. |
Warranty and Support
For any questions or concerns regarding your SupplySource AC Adapter, please contact SupplySource customer support. Refer to your purchase documentation for specific warranty terms and contact information.
You may also visit the SupplySource brand page on Amazon for additional product information or to contact the seller directly.