1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Anlapus 1080p HD-TVI Surveillance Camera. Please read this manual thoroughly before using the product to ensure proper function and safety.
The Anlapus HD-TVI camera is designed for both indoor and outdoor surveillance, offering high-definition video quality and robust performance in various environmental conditions.
2. Package Contents
Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.
- 4 x Anlapus 1080p HD-TVI Cameras
- 4 x BNC Video Cables
- 1 x Power Supply
- 1 x 1-to-4 Power Splitter Cable
- 4 x Warning Stickers
- 4 x Mounting Screw Bags (including screws and wall plugs)
- 4 x Mounting Hole Templates
- 1 x Quick Start Guide
3. Product Features
- 1080p HD Resolution: Provides clear and detailed video footage (1920x1080 pixels).
- Wide Viewing Angle: Equipped with a 3.6mm lens, offering a 90-degree field of view.
- HD-TVI Compatibility: Designed to work with HD-TVI DVRs. Ensure your DVR supports HD-TVI technology.
- Advanced Night Vision: Features 24 IR-Cut LEDs for up to 24 meters (80 feet) of clear black and white night vision.
- IP66 Weatherproof Rating: Robust metal housing ensures protection against dust and water, suitable for both indoor and outdoor use in various weather conditions.
- Flexible Mounting: Features a 3-axis adjustable bracket for ceiling or wall mounting, allowing 360-degree horizontal and 180-degree vertical adjustment.
4. Setup and Installation
4.1 Pre-Installation Checklist
- Ensure your DVR is compatible with HD-TVI cameras.
- Plan the camera placement to cover desired surveillance areas.
- Ensure power outlets are accessible for the camera power supply.
- Gather necessary tools: drill, screwdriver, ladder (if mounting high).
4.2 Mounting the Camera
- Select a suitable mounting location (wall or ceiling) that provides the desired viewing angle and is within reach of the BNC cable and power supply.
- Use the provided mounting hole template to mark the drill points on the surface.
- Drill pilot holes at the marked positions.
- Insert the wall plugs into the drilled holes (if mounting on masonry or drywall).
- Secure the camera base to the surface using the provided screws.
- Adjust the camera angle using the 3-axis bracket. The bracket allows for 360-degree horizontal rotation and 180-degree vertical tilt. Tighten the adjustment screws once the desired angle is achieved.
4.3 Connecting the Camera
Refer to the connection diagram below for proper wiring.
- Connect one end of the BNC video cable to the video output port of the camera.
- Connect the other end of the BNC video cable to a "VIDEO IN" port on your HD-TVI DVR.
- Connect the camera's power input to one of the outputs on the 1-to-4 power splitter cable.
- Connect the power supply to the 1-to-4 power splitter cable.
- Plug the power supply into a standard electrical outlet.
- Repeat these steps for all cameras.
Important: Ensure all connections are secure before powering on the system.
5. Operating Instructions
Once the cameras are properly installed and connected to your HD-TVI DVR, refer to your DVR's instruction manual for specific operating procedures, including:
- Viewing live footage from the cameras.
- Recording and playback of video.
- Configuring motion detection and alerts.
- Accessing the system remotely via mobile app or web interface.
- Adjusting camera settings (if supported by your DVR).
The Anlapus camera provides a continuous video feed to the DVR. Its night vision capabilities activate automatically in low-light conditions.
6. Maintenance
- Cleaning: Periodically clean the camera lens and housing with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Cable Inspection: Regularly check all cables for signs of wear, damage, or loose connections.
- Firmware Updates: While the camera itself does not typically require firmware updates, ensure your DVR's firmware is up-to-date for optimal performance and compatibility.
- Environmental Protection: Although the camera is IP66 weatherproof, extreme weather conditions (e.g., heavy snow, ice) may temporarily affect performance. Ensure the camera is securely mounted to withstand strong winds.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on DVR screen |
|
|
| Poor image quality / blurry video |
|
|
| Night vision not working |
|
|
If you encounter issues not covered here, please contact Anlapus customer support.
8. Specifications
| Model Number | AJ-A4K-202T4-WPES |
| Video Resolution | 1080p (1920 x 1080 Pixels) |
| Lens | 3.6mm |
| Viewing Angle | 90 Degrees |
| Night Vision Range | Up to 24 Meters (80 feet) |
| IR LEDs | 24 pcs IR-Cut LEDs |
| Weatherproof Rating | IP66 |
| Material | Metal |
| Connectivity Technology | Wired (BNC) |
| Power Input | 12 Volts |
| Power Consumption | 12 Watts |
| Dimensions (L x W x H) | 42.9 x 27 x 8.71 cm |
| Weight | 2.61 kilograms (for the package) |
| Recommended Use | Surveillance |
| Compatible Devices | Digital Video Recorder (DVR) |
9. Warranty and Support
Anlapus products are designed for reliability and performance. For warranty information and technical support, please refer to the warranty card included in your package or visit the official Anlapus website.
If you require assistance with installation, troubleshooting, or have any questions regarding your Anlapus surveillance camera, please contact our customer support team. Contact details can typically be found on the Anlapus brand store page or in the quick start guide.
