Introduction and Overview
The Nuby Easy Go Booster Seat is an ultra-light, compact, and portable booster seat designed for on-the-go families. Made of coated nylon, this durable booster seat features adjustable safety straps and a 3-point harness, ensuring your little one is safe and secure. The seat is stain-resistant and neatly folds together for easy cleaning and traveling. It is suitable for children 9+ months and holds up to 35 pounds.
This manual provides essential information for the safe and proper use, setup, and maintenance of your Nuby Easy Go Booster Seat.
Safety Information
- Always supervise your child: Never leave your child unattended in the booster seat.
- Secure properly: Always use and adjust the safety straps to firmly attach the booster seat to an adult chair. Ensure the chair attachment straps are tight and secure.
- Use the 3-point harness: Always fasten the 3-point harness to keep your child secure and prevent them from falling out.
- Weight Limit: Do not use for children weighing over 35 pounds.
- Age Recommendation: Suitable for children 9+ months who can sit upright unassisted.
- Chair Compatibility: Ensure the adult chair is stable and has a backrest that is at least 10 inches (25.4 cm) high.
- Material Safety: Nuby products are developed, researched, and manufactured to exceed all government safety regulations and standards. This product is phthalate-free and free of other suspected harmful chemicals.
Setup Instructions
Follow these steps to properly set up your Nuby Easy Go Booster Seat on an adult chair:
- Unfold the Booster Seat: Unclip the booster seat from its folded, compact state. The backrest will pop up.
- Position on Chair: Place the booster seat on a sturdy adult chair. Ensure the adult chair is stable and has a backrest at least 10 inches (25.4 cm) high.
- Secure Back Strap: Locate the adjustable strap at the back of the booster seat. Wrap it around the backrest of the adult chair and securely fasten the buckle. Pull the strap tight to eliminate slack.
- Secure Under-Seat Strap: Locate the adjustable strap at the bottom of the booster seat. Wrap it around the underside of the adult chair and securely fasten the buckle. Pull the strap tight to ensure the booster seat is firmly attached to the chair.
- Verify Stability: Gently push and pull on the booster seat to ensure it is securely attached and does not move or tip.
Image: The Nuby Easy Go Booster Seat, unfolded and ready for use on an adult chair.
Video: Official demonstration of the Nuby Easy Go Booster Seat, showing how to unfold and secure it to a chair, as well as how to fasten a child into the harness.
Operating Instructions
Once the booster seat is securely attached to an adult chair, follow these steps to place your child in the seat:
- Place Child in Seat: Gently place your child into the booster seat, ensuring they are seated comfortably and upright.
- Fasten 3-Point Harness: Bring the waist straps around your child's waist and connect them to the buckle. Bring the shoulder straps over your child's shoulders and connect them to the same buckle.
- Adjust Harness: Pull the harness straps to ensure a snug but comfortable fit around your child. There should be no more than one finger's width of slack between the straps and your child's body.
- Final Check: Before each use, double-check all buckles and straps to ensure they are securely fastened and properly adjusted.
Image: A child comfortably seated in the Nuby Easy Go Booster Seat at a dining table, demonstrating proper use.
Maintenance and Cleaning
The Nuby Easy Go Booster Seat is designed for easy maintenance:
- Cleaning: The booster seat is made with water- and stain-resistant fabric. To clean, simply wipe the surface with a damp cloth and mild soap.
- Drying: Allow the booster seat to air dry completely before folding or storing. Do not machine wash, bleach, tumble dry, or iron.
- Storage: For travel or storage, the booster seat easily collapses and folds neatly. Secure the velcro strap to keep it compact.
Image: The Nuby Easy Go Booster Seat folded into a compact, portable form, ideal for travel and storage.
Troubleshooting
- Issue: Booster seat feels unstable on the adult chair.
Solution: Ensure both the back strap and the under-seat strap are pulled tight and securely buckled. Verify that the adult chair is sturdy and has a suitable backrest. - Issue: Child's harness straps loosen during use.
Solution: Re-tighten the 3-point harness straps before each use. Ensure the buckles are fully engaged and the straps are adjusted snugly to your child's body. - Issue: Difficulty folding the booster seat for storage.
Solution: Ensure the backrest is fully collapsed and the side panels are folded inward. Secure the main velcro strap to keep the unit compact.
Specifications
| Brand | Nuby |
| Model Number | B082THT26M |
| Age Range | 9+ Months |
| Maximum Weight Recommendation | 35 Pounds |
| Item Dimensions (D x W x H) | 14.5"D x 11"W x 9.38"H |
| Item Weight | 1.78 Pounds |
| Color | Blue |
| Material Type | Foam, Nylon |
| Is Portable | Yes |
| Assembly Required | No |
Image: A visual representation of the booster seat's dimensions (9"H x 11"W x 4.5"D when folded, 12"H x 11"W x 9"D when open).
Warranty and Support
For warranty information or product support, please refer to the packaging or contact Nuby customer service directly. Keep your proof of purchase for any warranty claims.
