Introduction
This manual provides essential instructions for the safe installation, operation, and maintenance of your Broan-NuTone ALT336SS under-cabinet range hood. Please read all instructions carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.
Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury to persons.
- Read all instructions before installing or operating this appliance.
- Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
- Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back-drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
- When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
- Ducted fans must always be vented to the outdoors.
- To reduce the risk of fire, use only metal ductwork.
- This unit must be grounded.
Package Contents
Verify that all components are present before beginning installation:
- Broan-NuTone ALT336SS Range Hood
- Remote Control
- Installation Hardware (e.g., EZ1 brackets)
- Instruction Manual
Setup and Installation
The Broan-NuTone ALT336SS range hood is designed for under-cabinet mounting. It can be installed as hardwired or with an optional power cord kit (SHCK44, sold separately). For non-ducted applications, charcoal filters (sold separately) are required, and the hood features hidden louvers to exhaust air away from cabinetry.
Installation Features:
- EZ1 Brackets: These brackets facilitate single-person installation, significantly reducing installation time compared to traditional methods.
- Ducting Options: The unit supports ducted installation for outdoor venting or non-ducted (recirculating) installation with charcoal filters.
Dimensions and Clearance:
Refer to the diagram below for precise measurements and ensure adequate clearance above your cooking surface as per local building codes and manufacturer recommendations.

Image: Broan-NuTone ALT336SS Range Hood installed in a kitchen setting, demonstrating typical under-cabinet placement.

Image: Technical diagram illustrating the dimensions and mounting points of the Broan-NuTone ALT336SS Range Hood.
Operating Instructions
The Broan-NuTone ALT336SS features intuitive controls for efficient ventilation and lighting.

Image: Underside of the range hood, highlighting the touch controls and LED lighting.
Control Panel:
The hood is equipped with three-speed whisper touch infrared controls for ease of use.
- Blower Control: The Captur system's advanced blower design with a forward-positioned centric inlet efficiently removes smoke and odors. Select from three speeds, providing up to 450 Max CFM. The smooth-flow blower wheel design ensures quiet operation, less than 0.5 sones at normal speed.
- LED Lighting: Bright, three-level LED modules (3000 K color temperature) provide even illumination over the cooktop. These LEDs are designed for longevity in cooking environments.
- Delay Off Feature: Activates the blower for 10 minutes after cooking to clear residual air contaminants.
- Heat Sentry: This feature automatically detects excessive heat and adjusts the blower speed to protect the product and maintain proper ventilation.
Remote Operation:
The ALT336SS is ADA compliant, allowing for remote operation using a standard UL approved wall switch. An optional HCR3 handheld remote (sold separately) provides convenient control from anywhere in the kitchen.
Maintenance
Regular maintenance ensures optimal performance and longevity of your range hood.
Filter Cleaning:
The hood uses dishwasher-safe, hybrid baffle filters designed for ultra-efficient grease removal and superior airflow. A filter clean reminder will alert you when cleaning is necessary.
- Turn off power to the range hood at the circuit breaker before cleaning.
- Remove the baffle filters by disengaging their latches.
- Place filters in a dishwasher for cleaning or wash by hand with hot water and a mild detergent.
- Allow filters to dry completely before re-installing.
- Re-install the filters, ensuring they are securely latched.

Image: Hybrid baffle filters, designed for efficient grease capture and easy cleaning.
Troubleshooting
If you encounter issues with your range hood, consult the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate | No power to the unit; Motor malfunction | Check circuit breaker; Ensure unit is properly plugged in or wired; Contact customer support if issue persists. |
| Lights do not work | LED module failure; No power | Check power supply; Contact customer support for LED module replacement. |
| Poor ventilation/odor removal | Clogged filters; Improper ducting; Incorrect fan speed | Clean or replace filters; Verify ductwork is clear and properly installed; Select a higher fan speed. |
| Excessive noise | Loose parts; Obstruction in blower; Improper installation | Check for loose screws or components; Inspect blower for obstructions; Ensure proper installation. |
Specifications
| Feature | Specification |
|---|---|
| Model Number | ALT336SS |
| Brand Name | Broan-NuTone |
| Mounting Type | Under Cabinet Mount |
| Material | Stainless Steel |
| Color | Stainless Steel |
| Finish Type | Brushed |
| Number of Speeds | 3 |
| Noise Level | 0.5 Sones (at normal speed) |
| Light Source Type | LED |
| Light Color Temperature | 3000 K |
| Filter Type | Hybrid Baffle |
| Control Method | Infrared Touch, Remote (optional) |
| UPC | 026715264018 |
Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product or visit the official Broan-NuTone website. For technical support, replacement parts, or service inquiries, please contact Broan-NuTone customer service directly.
Manufacturer: Broan-NuTone
Website: www.broan-nutone.com