POWER IHP+ 1 Channel Programmable Timer Switch User Manual

1. Introduction

This user manual provides detailed instructions for the installation, operation, and maintenance of the POWER IHP+ 1 Channel Programmable Timer Switch, model CCT15551. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Safety Information

Always observe the following safety precautions:

• Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations.
• Disconnect power before installing, servicing, or removing the device.
• Do not expose the device to moisture, extreme temperatures, or corrosive environments.
• Ensure proper grounding to prevent electric shock.
• Do not attempt to repair or modify the device. Refer all servicing to qualified personnel.

3. Product Overview

The POWER IHP+ 1 Channel Programmable Timer Switch is designed for precise control of electrical circuits based on a programmed schedule. It features a digital display and intuitive controls for easy programming.

Figure 3.1: Front view of the IHP+ 1 Channel Programmable Timer Switch.

This image displays the front of the timer switch. Visible elements include the Schneider Electric logo, the model name IHP+ 1C, and the product code CCT15551. The digital display shows time markings from 0 to 24. Below the display are four control buttons labeled 'MENU', '-', '+', and 'OK'. Connection terminals are visible at the top, labeled 'Ext1', 'L', and 'N'. The device also indicates electrical ratings: R10a -30T, 16(10) A 250 V~.

3.1. Components and Controls

• Display: Digital screen showing time, program status, and settings.
• MENU Button: Accesses the main menu for programming and settings.
• - (Minus) Button: Decreases values or navigates backward in menus.
• + (Plus) Button: Increases values or navigates forward in menus.
• OK Button: Confirms selections and saves settings.
• Connection Terminals (L, N, Ext1): For electrical wiring connections.

4. Installation

The IHP+ 1 Channel Programmable Timer Switch is designed for DIN rail mounting.

1. Power Disconnection: Ensure the main power supply to the circuit is completely disconnected before beginning installation.
2. Mounting: Snap the timer switch onto a standard 35mm DIN rail in your electrical panel.
3. Wiring: Connect the electrical wires according to the wiring diagram provided below and the labels on the device terminals.
• Connect the Live (Phase) wire to the 'L' terminal.
• Connect the Neutral wire to the 'N' terminal.
• Connect the load (e.g., light, fan) to the output terminal (often labeled 'Ext1' or a similar output designation, referring to the image).
• Ensure all connections are secure and properly insulated.
4. Power Reconnection: Once all connections are secure, restore power to the circuit. The device display should illuminate.

Note: A detailed wiring diagram is typically found on the device itself or in a separate quick-start guide. Always consult professional electrical guidance if unsure.

5. Operating Instructions

This section details how to set up and program your IHP+ timer switch.

5.1. Initial Setup (Time and Date)

1. Upon first power-up or after a long power outage, the device may prompt you to set the current time and date.
2. Use the + and - buttons to adjust the values (year, month, day, hour, minute).
3. Press OK to confirm each setting and move to the next.

5.2. Programming ON/OFF Times

1. Press the MENU button to enter the programming mode.
2. Navigate through the menu options using the + and - buttons until you find "Program" or "Timer Settings". Press OK.
3. Select an empty program slot (e.g., "P1 ON"). Press OK.
4. Set the desired ON time (hour and minute) using + and -, then OK.
5. Select the days of the week for this program to be active. You can choose individual days or blocks (e.g., Mon-Fri, Sat-Sun, Mon-Sun). Press OK.
6. Repeat the process for the corresponding OFF time (e.g., "P1 OFF").
7. Continue adding more program pairs as needed. The device typically supports multiple ON/OFF programs.
8. Exit the programming menu by pressing MENU repeatedly or selecting an "Exit" option.

5.3. Manual Override

The timer switch usually has a manual override function to temporarily switch the output ON or OFF regardless of the programmed schedule.

• Look for a dedicated button or a specific combination of buttons (e.g., pressing OK briefly from the main screen) to toggle the output state.
• The display will typically indicate "ON" or "OFF" for the manual state.
• The manual override usually remains active until the next programmed switching event or until manually cancelled.

6. Maintenance

The POWER IHP+ timer switch requires minimal maintenance.

• Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids.
• Inspection: Periodically check the wiring connections for tightness and signs of wear or damage.
• Battery Backup: The device may contain an internal battery for retaining settings during power outages. This battery is typically long-lasting and not user-replaceable.

7. Troubleshooting

If the problem persists after attempting these solutions, contact customer support.

8. Specifications

• Brand: POWER
• Model Number: CCT15551
• Product Dimensions (L x W x H): 10 x 10 x 10 cm (3.94 x 3.94 x 3.94 inches)
• Item Weight: 160 grams (0.35 lbs)
• Rated Current: 16(10) A
• Rated Voltage: 250 V~
• Operating Temperature: R10a -30T
• ASIN: B082P963V7
• Manufacturer: Power

9. Warranty and Support

For warranty information and technical support, please refer to the official POWER website or contact your local distributor. Keep your purchase receipt as proof of purchase.

Manufacturer: Power

Contact Information: Please visit the manufacturer's official website or contact your retailer for support.