1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Cudy AX3000 Wireless WiFi 6 PCIe Card with Bluetooth 5.2 (Model WE3000). This device is designed to enhance your desktop PC's wireless connectivity, offering high-speed Wi-Fi and advanced Bluetooth capabilities.
Key Features:
- AX200 WiFi 6 Module: Integrated Intel AX200 chip for superior wireless performance.
- High-Speed Wi-Fi: Up to 574Mbps on 2.4GHz and 2402Mbps on 5GHz, ideal for gaming and 4K streaming.
- Bluetooth 5.2 Technology: Offers 2x faster speed and 4x broader coverage than Bluetooth 4.2, backward compatible with Bluetooth 4.0.
- WPA3 Advanced Security: Enhanced encryption for personal password safety, protecting your network from unauthorized access.
- OFDMA Technology: Reduces lag by up to 75% for ultra-responsive real-time gaming and smoother experiences.
- Broad Compatibility: Fully compatible with 802.11ax/ac/a/b/g/n routers and Bluetooth 5.0/4.2/4.0 devices.

Figure 1: The Cudy AX3000 PCIe card, highlighting the integrated AX200 WiFi 6 module.

Figure 2: Visual representation of the Bluetooth 5.2 technology integrated into the Cudy AX3000 card, offering enhanced speed and range.
2. Setup and Installation
2.1. Hardware Installation
- Prepare Your PC: Turn off your computer and unplug the power cable from the wall outlet.
- Open the PC Case: Remove the side panel of your computer case to access the motherboard.
- Connect Bluetooth Cable: Connect the provided Bluetooth header cable to the adapter. This cable is essential for Bluetooth functionality.
- Locate PCIe Slot: Identify an available PCIe X1 slot on your motherboard. The card is compatible with PCIe X1, X4, X8, or X16 slots. Also, locate an available F_USB connector on your motherboard for the Bluetooth cable.
- Install the Adapter: Carefully insert the Cudy AX3000 PCIe card into the chosen PCIe slot. Ensure it is seated firmly.
- Connect Bluetooth to Motherboard: Connect the other end of the Bluetooth header cable to the F_USB connector on your motherboard.
- Secure the Adapter: Use a screw to secure the adapter's bracket to your computer case.
- Attach Antennas: Screw the two 5 dBi high-gain antennas onto the connectors at the back of the adapter. Adjust their position for optimal signal reception.
- Close PC Case: Replace the side panel of your computer case.
- Power On: Plug the power cable back into the wall outlet and turn on your computer.

Figure 3: The Cudy AX3000 PCIe card, showing the antenna connectors and the Bluetooth USB header connection point.

Figure 4: Contents of the Cudy AX3000 package, including the card, antennas, Bluetooth cable, and low-profile bracket.
2.2. Driver Installation
The Cudy AX3000 card requires drivers for full functionality. It is recommended to download the latest drivers from the official Cudy website or Intel's website (for the AX200 chip).
- System Requirements: Ensure your operating system is Windows 10 (64-bit) or Windows 11 (64-bit).
- Download Drivers: Visit the Cudy support website or Intel's official download center. Search for drivers compatible with the Intel AX200 Wi-Fi 6 module and Bluetooth 5.2. Download both the Wi-Fi and Bluetooth drivers.
- Install Wi-Fi Drivers: Run the Wi-Fi driver installer and follow the on-screen instructions. Restart your PC if prompted.
- Install Bluetooth Drivers: Run the Bluetooth driver installer and follow the on-screen instructions. Restart your PC if prompted.
- Important Note: Do not run the Bluetooth and Wi-Fi driver installers simultaneously. Install them one after another, restarting your PC as needed.

Figure 5: The Cudy AX3000 card is compatible with Windows 10/11 64-bit operating systems.
3. Operating Instructions
3.1. Connecting to Wi-Fi
- After successful driver installation, click the Wi-Fi icon in your system tray (usually bottom-right corner of the screen).
- Select your desired Wi-Fi network from the list of available networks.
- Enter the network security key (password) if prompted.
- Click 'Connect'. Your PC should now be connected to the Wi-Fi network.
3.2. Pairing Bluetooth Devices
- Go to your PC's 'Settings' > 'Devices' > 'Bluetooth & other devices'.
- Ensure Bluetooth is turned 'On'.
- Put your Bluetooth device (e.g., headphones, mouse, keyboard) into pairing mode. Refer to your device's manual for specific instructions.
- On your PC, click 'Add Bluetooth or other device' and select 'Bluetooth'.
- Select your device from the list and follow any on-screen prompts to complete the pairing process.

Figure 6: The Cudy AX3000 supports dual-band Wi-Fi, offering 2402Mbps on 5GHz and 574Mbps on 2.4GHz for diverse connectivity needs.
4. Maintenance
- Keep Drivers Updated: Regularly check the Cudy or Intel website for the latest Wi-Fi and Bluetooth drivers to ensure optimal performance and security.
- Clean PC Internals: Periodically clean the inside of your PC case, including the PCIe card and surrounding components, to prevent dust buildup which can affect performance and longevity.
- Antenna Placement: Ensure antennas are positioned optimally for the best signal strength. Avoid obstructions.
5. Troubleshooting
5.1. No Wi-Fi Connection
- Check Physical Connection: Ensure the PCIe card is correctly seated in its slot and antennas are securely attached.
- Verify Drivers: Confirm that Wi-Fi drivers are installed correctly and are up to date in Device Manager.
- Router Status: Check if your Wi-Fi router is powered on and broadcasting a signal.
- Windows Settings: Ensure Wi-Fi is enabled in Windows settings.
5.2. No Bluetooth Functionality
- Check Bluetooth Cable: Ensure the Bluetooth header cable is securely connected to both the adapter and the motherboard's F_USB connector.
- Verify Drivers: Confirm that Bluetooth drivers are installed correctly and are up to date in Device Manager.
- Windows Settings: Ensure Bluetooth is enabled in Windows settings.
5.3. Slow Wi-Fi Speeds
- Antenna Position: Adjust antenna orientation for better signal reception.
- Router Distance/Obstructions: Move closer to your Wi-Fi router or minimize physical obstructions (walls, large appliances).
- Network Congestion: Reduce the number of devices connected to your Wi-Fi network or switch to the 5GHz band if available.
- Router Compatibility: Ensure your router supports Wi-Fi 6 (802.11ax) to achieve maximum speeds.
6. Specifications
| Feature | Description |
|---|---|
| Model | WE3000 |
| Wireless Standard | IEEE 802.11ax/ac/a/b/g/n (Wi-Fi 6) |
| Chipset | Intel AX200 |
| Wi-Fi Speed (2.4GHz) | Up to 574 Mbps |
| Wi-Fi Speed (5GHz) | Up to 2402 Mbps |
| Bluetooth Version | Bluetooth 5.2 (backward compatible with 5.0/4.2/4.0) |
| Security | WPA3 |
| Antennas | Two 5 dBi High Gain Antennas |
| Interface | PCIe X1 (compatible with X4, X8, X16 slots), USB (for Bluetooth) |
| Operating System | Windows 10 (64-bit), Windows 11 (64-bit) |
| Dimensions | 4.21"L x 1.38"W x 9.06"H (Product) |
| Item Weight | 2.2 pounds |
7. Warranty and Support
For warranty information, technical support, and further assistance, please visit the official Cudy website or contact their customer support. Keep your purchase receipt for warranty claims.
Manufacturer: Shenzhen Cudy Technology Co., Ltd.