SbS TEJZEARGOSPELS

JAZ Gospel Wired Earphones User Manual

Model: TEJZEARGOSPELS

Introduction

Thank you for choosing the JAZ Gospel Wired Earphones. These earphones are designed to provide clear audio and convenient communication with a built-in microphone and inline controls. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Safety Information

Please read all safety instructions carefully before using the earphones. Keep this manual for future reference.

  • Avoid listening at high volume levels for extended periods to prevent hearing damage.
  • Do not use earphones in situations where inability to hear ambient sounds could be dangerous (e.g., while driving, cycling, or walking in traffic).
  • Keep the earphones away from water, moisture, and extreme temperatures.
  • Do not attempt to disassemble or modify the earphones. This will void the warranty.
  • Clean the earphones with a soft, dry cloth only.

Package Contents

Verify that all items are present in the package:

  • JAZ Gospel Wired Earphones
  • 2 Rubber Pads (pre-installed or included separately)
  • User Manual (this document)
JAZ Gospel Wired Earphones retail packaging

Image: Retail packaging of the JAZ Gospel Wired Earphones, showing the earphones and inline control through the clear plastic.

Product Overview

Familiarize yourself with the components of your JAZ Gospel Wired Earphones:

  • Earbuds: Designed for in-ear comfort and sound delivery.
  • Inline Control: Houses the microphone and control button for calls.
  • 3.5mm Jack Cable: Standard audio connector for various devices.
  • Rubber Pads: Provide a secure and comfortable fit within the ear.
Close-up of JAZ Gospel Wired Earphones earbud

Image: A close-up view of one JAZ Gospel earbud, highlighting its design and speaker grille.

JAZ Gospel Wired Earphones with inline control

Image: Both JAZ Gospel earbuds connected by their cable, with the inline control module visible in the center.

Setup

Setting up your JAZ Gospel Wired Earphones is straightforward:

  1. Unpack: Carefully remove the earphones from their packaging.
  2. Check Rubber Pads: Ensure the rubber pads are securely attached to the earbuds. If they feel loose or you need to replace them, gently push them onto the earbud nozzle until they are snug.
  3. Connect: Insert the 3.5mm jack into the audio port of your compatible device (smartphone, tablet, laptop, MP3 player, etc.). Ensure the jack is fully inserted for proper audio transmission.
  4. Wear: Place the earbuds comfortably into your ears. The ergonomic design and rubber pads are intended to provide a secure fit.

Operating Instructions

The JAZ Gospel Wired Earphones feature an inline control for managing calls.

Audio Playback

  • Once connected to your device, audio will automatically play through the earphones when initiated from your device.
  • Volume control is managed directly from your connected device.

Call Management

The inline control button allows for basic call functions:

  • Answer Call: Press the control button once when an incoming call rings.
  • End Call: Press the control button once during an active call to hang up.
  • Reject Call: Press and hold the control button for approximately 2 seconds when an incoming call rings.
  • Play/Pause Music: Press the control button once to play or pause music playback.

The built-in microphone is located on the inline control, ensuring clear voice transmission during calls.

Maintenance

Proper care will extend the life of your earphones:

  • Cleaning: Use a soft, dry, lint-free cloth to wipe the earbuds and cable. Do not use liquid cleaners or abrasive materials.
  • Storage: When not in use, store the earphones in a clean, dry place, preferably in a small pouch or case to prevent tangling and damage to the cable.
  • Cable Care: Avoid sharp bends or excessive pulling on the cable, especially near the jack and earbud connections, as this can damage internal wires.

Troubleshooting

If you encounter issues with your earphones, try the following solutions:

ProblemPossible Cause / Solution
No sound or distorted sound
  • Ensure the 3.5mm jack is fully inserted into the device's audio port.
  • Check the volume level on your connected device.
  • Test the earphones with another device to rule out a device issue.
  • Inspect the cable for any visible damage or kinks.
Microphone not working
  • Ensure the 3.5mm jack is fully inserted. Some devices require a TRRS jack for microphone functionality.
  • Check microphone settings on your connected device.
  • Test with another device to confirm if the microphone itself is faulty.
Inline control button not responding
  • Ensure the earphones are properly connected.
  • Some devices or apps may not fully support all inline control functions. Test with a different app or device.

Specifications

FeatureDetail
Model NameGospel Wired
Model NumberTEJZEARGOSPELS
Connectivity TechnologyWired
Headphones Jack3.5 mm Jack
Cable Length1.2 meters (approx. 47 inches)
MicrophoneBuilt-in
Control MethodTouch (Inline button)
Ear PlacementIn Ear
Form FactorIn Ear
Noise ControlSound Isolation
MaterialRubber
Product Dimensions7.87 x 7.87 x 11.81 inches
Item Weight4.9 ounces
ManufacturerSBS
Date First AvailableMay 19, 2020

Warranty and Support

For warranty information and technical support, please refer to the documentation provided at the time of purchase or visit the official SbS website. Keep your proof of purchase for warranty claims.

If you require further assistance, please contact SbS customer service through their official channels.

© 2024 SbS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.