Product Overview
The Mount Plus MP-HAB2 Premier Aluminum Storage Stand is designed to provide a stable and organized docking solution for your Dyson cordless stick vacuum cleaner and its accessories. This freestanding metal stand eliminates the need for wall-mounting, protecting your walls and offering flexible placement options. It is compatible with Dyson V6, V7, V8, V10, V11, V12, and V15 models.
Image: The Mount Plus MP-HAB2 stand holding a Dyson V11 vacuum cleaner and multiple accessories, positioned next to a shelving unit.
Package Contents
Upon unboxing your Mount Plus MP-HAB2 stand, please verify that all components are present and undamaged. The package typically includes:
- Heavy Base Plate (11.6 x 8.6 inches, 6 lbs)
- Main Tower Structure (2mm thick steel)
- Accessory Holders (multiple, made of high-quality aluminum and steel)
- Mounting Hardware (screws, Allen wrench)
- Instruction Manual
For a visual guide to the package contents and initial unboxing, please refer to the video below.
Video: Unboxing of the Mount Plus vacuum stand, showing all components included in the package.
Setup Instructions
Follow these steps to assemble your Mount Plus MP-HAB2 storage stand:
- Attach the Base: Secure the vertical tower section to the heavy base plate using the provided screws. Ensure the holes for accessory holders on the tower face forward.
- Connect Tower Sections: If the tower comes in multiple pieces, connect them securely using the internal connectors and screws.
- Install Accessory Holders: Attach the plastic accessory holders to the designated holes on the front of the tower using the smaller screws. These holders are designed to accommodate various Dyson cleaning attachments.
- Mount Dyson Dock: Attach your Dyson vacuum's original wall-mount docking station (not included with the stand) to the top section of the Mount Plus stand using the appropriate screws. Adjust the height as needed before fully tightening.
- Cable Management: Route the charging cable from the Dyson dock down the back of the stand through the integrated cable management channels. Secure the cable with the provided clips to maintain a tidy appearance.
For a detailed visual walkthrough of the installation process, please watch the instructional video below.
Video: A comprehensive guide on how to install and use the Mount Plus Dyson Vacuum Stand, including assembly steps and vacuum placement.
Image: Detailed view of the Mount Plus stand highlighting multiple accessory holders, integrated cable management, and a large stable base with silicone pads.
Operating Instructions
Using your Mount Plus MP-HAB2 stand is straightforward:
- Docking the Vacuum: Gently slide your Dyson cordless vacuum cleaner onto its mounted docking station at the top of the stand. Ensure it clicks securely into place.
- Charging: Once docked, the vacuum will begin charging automatically if the power cable is connected to an outlet. The stand's design keeps the cable neatly organized.
- Accessory Storage: Utilize the various accessory holders along the tower to store your Dyson attachments. This keeps them organized, easily accessible, and prevents clutter.
Maintenance
To ensure the longevity and appearance of your Mount Plus MP-HAB2 stand:
- Cleaning: Wipe the stand regularly with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
Troubleshooting
- Stand Instability: Ensure the base is placed on a flat, level surface. Verify that all screws connecting the tower to the base are fully tightened. The heavy base is designed for stability.
- Dyson Dock Not Fitting: Double-check that your Dyson docking station is correctly aligned with the pre-drilled holes on the Mount Plus stand. Some Dyson models may have slightly different docking station designs; ensure compatibility.
- Screws Too Long: If any screws appear too long and bottom out before tightening, ensure you are using the correct screws for each step as indicated in the manual. In rare cases, slightly shorter screws of the same thread type may be needed (e.g., M5-0.8, 20mm length).
Specifications
- Brand:
- Mount Plus
- Model:
- MP-HAB2
- Material:
- Aluminum, Steel
- Color:
- Grey
- Item Weight:
- 6 Pounds
- Mounting Type:
- Freestanding
- Compatible Models:
- Dyson V6, V7, V8, V10, V11, V12, V15 Cordless Stick Vacuum Cleaners
Warranty & Support
For any questions, concerns, or support regarding your Mount Plus MP-HAB2 Premier Aluminum Storage Stand, please contact Mount Plus customer service. Refer to the product packaging or the official Mount Plus website for specific warranty information and contact details.
