1. Product Overview
This manual provides detailed instructions for the installation, operation, and maintenance of your Craftmade Bolden 4-Light Vanity Bath Lighting fixture, model 50504-FB. This fixture features a flat black finish with clear seeded glass shades, designed for indoor damp locations.
Image 1.1: Craftmade Bolden 4-Light Vanity Bath Lighting fixture.
2. Safety Information
WARNING: To reduce the risk of fire, electric shock, or personal injury, always follow these safety precautions:
- Always turn off the power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
- Consult a qualified electrician if you are unsure about the installation process.
- All wiring connections must be in accordance with local and national electrical codes.
- This fixture is CUL Approved for DAMP Locations. Do not install in areas exposed to direct water spray.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
- Do not exceed the maximum wattage specified for the bulbs.
3. Package Contents
Verify that all components are present before beginning installation:
- Vanity Light Fixture (1)
- Glass Shade(s) (4)
- Hardware Pack (1)
- Installation Guide (1)
Note: Bulbs are not included and must be purchased separately.
4. Setup and Installation
Assembly is required. Follow these steps for proper installation:
- Prepare for Installation: Turn off power at the circuit breaker. Clear the work area.
- Mounting Hardware: Attach the mounting bracket to the existing junction box (junction box not included) using the provided hardware. Ensure the bracket is securely fastened.
- Wiring: Connect the fixture's electrical wires to the corresponding household wires (black to black, white to white, ground to ground) using wire nuts. Ensure all connections are secure.
- Secure Fixture: Carefully align the fixture with the mounting bracket and secure it in place with the provided screws.
- Install Shades: Gently attach the clear seeded glass shades to the fixture.
- Install Bulbs: Screw in the appropriate E26 base bulbs (not included). Do not exceed 100 watts per bulb.
- Restore Power: Once installation is complete and all components are secure, restore power at the circuit breaker.
Image 4.1: Product dimensions for installation planning.
Image 4.2: Assembled fixture detail.
5. Operating Instructions
The Craftmade Bolden vanity light operates via a standard wall switch (rocker or push button, not included). This fixture is designed for use with four E26 medium base bulbs, up to 100 watts each, for a total of 400 watts.
- Bulb Compatibility: Compatible with Incandescent, CFL, Halogen, or LED bulbs.
- Dimming Functionality: The fixture is dimmable when used with dimmable bulbs and a compatible dimmer switch (sold separately).
- Light Control: Use your existing wall switch to turn the light fixture on or off.
6. Maintenance
Regular maintenance ensures the longevity and appearance of your lighting fixture.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Bulb Replacement: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before touching. Replace with E26 medium base bulbs, not exceeding 100 watts per bulb.
- Glass Shades: The clear seeded glass shades can be removed for cleaning. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
7. Troubleshooting
If your fixture is not functioning correctly, refer to the following common issues and solutions:
- Light does not turn on:
- Check if the power is on at the circuit breaker.
- Ensure bulbs are screwed in tightly and are not burnt out.
- Verify all wiring connections are secure.
- Lights flicker:
- Ensure bulbs are compatible with the dimmer switch, if one is installed.
- Check for loose wiring connections.
- Dimming not working:
- Confirm that both the bulbs and the wall switch are dimmable.
- Ensure the dimmer switch is correctly installed and compatible with the bulb type.
If issues persist, contact customer support.
8. Specifications
Detailed technical specifications for the Craftmade Bolden 50504-FB fixture:
| Model Number | 50504-FB |
| Brand | Craftmade |
| Dimensions (H x W x D) | 8.5" H x 25.13" W x 6.5" D |
| Backplate Diameter | 5" Dia |
| Number of Lights | 4 |
| Bulb Base | E26 Medium Base |
| Max Wattage per Bulb | 100 Watts |
| Total Wattage | 400 Watts |
| Voltage | 120 Volts |
| Material | Alloy Steel, Glass |
| Finish | Flat Black |
| Shade Material | Clear Seeded Glass |
| Dimmable | Yes (with dimmable bulbs and dimmer switch) |
| Installation Type | Semi Flush Mount |
| Indoor/Outdoor Usage | Indoor |
| Water Resistance Level | Water Resistant (Damp Location Rated) |
| Item Weight | 6 Pounds |
Image 8.1: Key specifications overview.
9. Warranty and Support
Warranty: This Craftmade lighting fixture comes with a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.
Customer Support: For technical assistance, warranty claims, or any questions regarding your product, please contact Craftmade customer support:
Phone: (800) 486-4892
Please have your model number (50504-FB) and date of purchase available when contacting support.
