1. Introduction
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Craftmade Bolden 5-Light Chandelier, Model 50525-FB. This fixture features a flat black finish with clear seeded glass shades, designed for indoor use. Please read all instructions carefully before beginning installation.
Image 1: The Craftmade Bolden 5-Light Chandelier, showcasing its flat black finish and clear seeded glass shades.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for indoor use only. Do not install in wet or damp locations.
- Ensure the mounting surface can support the weight of the fixture.
- Use only the specified bulb type and wattage to avoid fire or electrical hazards.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- This product is UL & ULC Approved for INDOOR Locations, ensuring compliance with safety standards.
3. Package Contents
Verify that all components are present before beginning installation:
- Chandelier Assembly
- Clear Seeded Glass Shade(s) (5 pieces)
- Mounting Hardware Pack (includes mounting strap, screws, wire nuts)
- 72-inch Chain
- 120-inch Leadwire
- Installation Guide (this document)
Note: Light bulbs are not included and must be purchased separately.
4. Setup and Installation
Professional installation is recommended. Ensure power is disconnected at the circuit breaker before proceeding.
- Prepare for Installation:
- Turn off electricity at the main fuse box or circuit breaker.
- Carefully unpack the fixture and check for any damage. Lay out all parts on a clean, flat surface.
- Ensure you have an existing junction box securely mounted in the ceiling. (Junction box not included).
- Mounting the Fixture:
- Attach the mounting strap to the junction box using the provided screws.
- Determine the desired hanging height for the chandelier. Adjust the chain length by removing links as needed. The fixture includes a 72-inch chain.
- Thread the 120-inch leadwire through the chain and canopy.
- Secure the chain to the mounting strap.
- Electrical Connections:
- Connect the fixture's black wire to the house's black (hot) wire using a wire nut.
- Connect the fixture's white wire to the house's white (neutral) wire using a wire nut.
- Connect the fixture's ground wire to the house's ground wire (or bare copper wire) and to the mounting strap's ground screw.
- Carefully tuck all wires into the junction box.
- Final Assembly:
- Secure the canopy to the mounting strap, ensuring it sits flush against the ceiling.
- Install the five clear seeded glass shades onto the fixture arms.
- Install five E26 medium base bulbs (not included) into the sockets. Do not exceed the maximum wattage of 100 watts per bulb.
Image 2: Dimensional drawing of the Craftmade Bolden Chandelier, showing its height (20.5 inches), width (24 inches), ceiling canopy diameter (4.75 inches), and lead wire length (120 inches).
5. Operating Instructions
Once installation is complete and power is restored, your Craftmade Bolden Chandelier is ready for use.
- Power On/Off: Operate the chandelier using a standard wall switch connected to the fixture's circuit.
- Bulb Requirements: This fixture requires five (5) E26 medium base bulbs. Each bulb can be incandescent, CFL, halogen, or LED, with a maximum wattage of 100 watts. The total wattage for the fixture should not exceed 500 watts.
- Dimming Functionality: The fixture supports full-range dimming when used with dimmable bulbs and a compatible dimmer switch (sold separately).
Image 3: Specifications table for the Craftmade Bolden 5-Light Chandelier, detailing bulb quantity (5), maximum wattage per bulb (100W), socket base (E26 Medium), recommended bulb type (A19), dimmability (Yes), and bulb inclusion (No).
6. Maintenance
Regular maintenance ensures the longevity and appearance of your chandelier.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. For glass shades, a mild glass cleaner can be used on a cloth, then wipe dry.
- Bulb Replacement: Ensure power is off and bulbs have cooled before replacing. Unscrew old bulbs and screw in new E26 medium base bulbs, adhering to the maximum 100-watt rating per bulb.
- Inspections: Periodically check all connections and mounting hardware for tightness.
7. Troubleshooting
If you experience issues with your chandelier, refer to the following common problems and solutions:
- Fixture does not light:
- Ensure power is on at the circuit breaker and wall switch.
- Check that bulbs are screwed in tightly and are not burnt out.
- Verify electrical connections are secure.
- Flickering lights:
- Confirm bulbs are fully seated in their sockets.
- If using a dimmer, ensure it is compatible with your bulb type and rated for the total wattage.
- Check for loose wiring connections.
- Glass shades are loose:
- Gently tighten the retaining rings or screws that secure the shades. Do not overtighten.
If problems persist, consult a qualified electrician or contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 50525-FB |
| Dimensions (H x W) | 20.5" (52.07 cm) x 24" (60.96 cm) |
| Ceiling Canopy Diameter | 4.75" (12.07 cm) |
| Lead Wire Length | 120" (304.8 cm) |
| Chain Length | 72" (182.88 cm) |
| Number of Lights | 5 |
| Max Wattage per Bulb | 100 Watts |
| Total Max Wattage | 500 Watts |
| Bulb Base | E26 Medium |
| Dimmable | Yes (with dimmable bulbs and compatible dimmer switch) |
| Voltage | 120 Volts |
| Finish | Flat Black |
| Shade Material | Clear Seeded Glass |
| Indoor/Outdoor Use | Indoor Only |
| Certifications | UL & ULC Approved |
| Item Weight | 11.44 Pounds |
| UPC | 647881198312 |
9. Warranty and Support
Warranty: This Craftmade product is covered by a 1-year limited manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
Customer Support: For technical assistance, missing parts, or warranty inquiries, please contact Craftmade customer support:
- Phone: (800) 486-4892
- Website: www.craftmade.com (Please refer to the official Craftmade website for the most current contact information and support resources.)
Please have your model number (50525-FB) and proof of purchase ready when contacting support.
