Stihl GTA 26 SET

Download PDF
Contents

Stihl GTA 26 Wood Cutter User Manual

Model: GTA 26 SET | Brand: Stihl

1. Introduction

Thank you for choosing the Stihl GTA 26 Wood Cutter. This battery-operated cordless wood cutter is designed for efficient and convenient cutting of wood and tree branches. Please read this manual carefully before operating the device to ensure safe and proper use, maintenance, and optimal performance.

1.1 Safety Information

Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and hearing protection when operating the wood cutter. Ensure the work area is clear of bystanders and obstacles. Keep hands and feet away from the cutting chain. Disconnect the battery before performing any maintenance or adjustments.

2. What's in the Box

Your Stihl GTA 26 Wood Cutter package includes the following components:

  • Stihl GTA 26 Wood Cutter unit
  • AS 2 Battery (1 Lithium Polymer battery included)
  • AL 1 Charger
  • Carrying Bag
  • Instruction Manual
Stihl GTA 26 Wood Cutter in its retail packaging

Figure 2.1: The Stihl GTA 26 Wood Cutter package, showing the main unit, battery, charger, and carrying bag.

Stihl GTA 26 Wood Cutter and accessories neatly packed in the carrying bag

Figure 2.2: The Stihl GTA 26 Wood Cutter and its components, including the battery and charger, stored within the provided carrying bag.

3. Setup

3.1 Charging the Battery

  1. Connect the AL 1 Charger to a suitable power outlet.
  2. Insert the AS 2 Battery into the charger. Ensure it clicks into place.
  3. The charger's indicator light will show the charging status. A full charge is indicated when the light turns solid green.
  4. Once fully charged, remove the battery from the charger.

3.2 Installing the Battery

  1. Ensure the wood cutter is turned off and the chain is not moving.
  2. Align the AS 2 Battery with the battery compartment on the handle of the GTA 26.
  3. Slide the battery firmly into the compartment until it locks securely.
  4. Check the battery indicator lights on the tool to confirm power.
Side view of Stihl GTA 26 Wood Cutter showing the battery compartment

Figure 3.1: The Stihl GTA 26 Wood Cutter, illustrating the design and location of the battery slot at the base of the handle.

4. Operating Instructions

4.1 Basic Operation

  1. With the battery installed, press the power button to activate the tool. The battery indicator lights will illuminate.
  2. To start the chain, press and hold the trigger switch. The chain will begin to rotate.
  3. To stop the chain, release the trigger switch.
  4. Always ensure the chain is completely stopped before setting the tool down or performing any adjustments.

4.2 Usage Tips

  • The Stihl GTA 26 is ideal for cutting wood and branches up to 4 cm (1.6 inches) in diameter.
  • For thicker branches, make multiple shallow cuts rather than one deep cut.
  • Maintain a firm grip on the tool with both hands during operation.
  • Avoid cutting into the ground or hard objects, as this can damage the chain.
Stihl GTA 26 Wood Cutter with safety guard in place

Figure 4.1: The Stihl GTA 26 Wood Cutter, showcasing its compact design and the protective guard over the chain.

Stihl GTA 26 Wood Cutter with the chain cover attached

Figure 4.2: The Stihl GTA 26 Wood Cutter with its chain cover in place, demonstrating safe storage or transport configuration.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Stihl GTA 26.

5.1 Cleaning

  • After each use, remove the battery and clean the tool with a damp cloth.
  • Remove any sawdust or debris from the chain and guide bar area.
  • Do not use harsh chemicals or abrasive cleaners.

5.2 Chain Sharpening and Replacement

  • A sharp chain is crucial for efficient cutting. Sharpen the chain regularly or replace it when dull or damaged.
  • Refer to the detailed instructions in the full product manual for chain sharpening and replacement procedures.
  • Use only genuine Stihl replacement parts.

6. Troubleshooting

ProblemPossible CauseSolution
Tool does not startBattery not charged or not properly installed.Charge battery fully. Ensure battery is securely clicked into place.
Chain not cutting efficientlyDull or damaged chain.Sharpen or replace the chain.
Tool stops during operationOverload protection activated or battery low.Reduce cutting pressure. Recharge battery.

7. Specifications

FeatureDetail
BrandStihl
ModelGTA 26 SET
Power SourceBattery Operated
Battery Type1 Lithium Polymer battery (included)
Item Weight1.2 Kilograms (2.64 pounds)
Cutting Width34 Centimeters
Product Dimensions19.69"L x 13.39"W
Assembly RequiredYes
Recommended UseCutting wood or tree branches
ColorOrange
ManufacturerStihl
UPC886661634262

8. Warranty and Support

For detailed warranty information and customer support, please refer to the warranty card included with your product or visit the official Stihl website. Keep your purchase receipt as proof of purchase for any warranty claims.

If you encounter any issues not covered in this manual, please contact Stihl customer service or an authorized service center.

© 2025 Stihl. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.