Introduction
This manual provides essential information for the proper use and care of your Bedgear Storm Performance Pillow Size 2.0. Designed for all sleep positions, this pillow features a cooling Ver-Tex cover and dual-sided comfort to enhance your sleep experience.
Image: The Bedgear Storm Performance Pillow Size 2.0, showcasing its textured white cover and grey mesh side panels.
Setup
- Unpacking: Carefully remove the pillow from its packaging.
- Allow to Expand: The pillow may be compressed. Allow it to decompress and regain its full shape for a few hours, or up to 24 hours, in a well-ventilated area.
- Initial Airing: If there is a slight new product scent, allow the pillow to air out in a well-ventilated room for 24-48 hours.
- Cover Check: Ensure the removable Ver-Tex cover is securely zipped onto the pillow.
Image: A close-up view of the pillow's zipper, indicating the removable cover.
Operating (Usage)
The Bedgear Storm Performance Pillow is designed for personalized comfort and cooling. Follow these guidelines for optimal use:
- Dual-Sided Comfort: This pillow features two distinct sides. One side, with the React Crown, offers a firmer feel with weightless support. The other side, with the React Foam Core, provides a medium-firm feel designed to reduce pillow bounce. Experiment with both sides to find your preferred comfort level.
- Cooling Properties: The Ver-Tex cover is engineered to disperse heat away from your head, neck, and shoulders. For maximum cooling effect, it is recommended to use the pillow without an additional pillowcase.
- Airflow Technology: The Air-X mesh side panels promote continuous airflow, preventing heat buildup.
- Finding Your Fit: The Storm Performance Pillow is available in different sizes (0.0, 1.0, 2.0, 3.0) to accommodate various body types and sleep positions. Refer to the "Find Your Fit" chart to determine the ideal pillow height for you.
Image: A chart illustrating how to select the correct pillow size (0.0, 1.0, 2.0, 3.0) based on body type and sleep position.
Image: An illustration showing the internal layers of the pillow, highlighting the React Crown, React Foam Core, and Ver-Tex cover.
Video: An official Bedgear video demonstrating the Ver-Tex Cooling Cover Technology and its benefits for heat dispersion.
Video: An official Bedgear video explaining the performance pillow sizing to help users find their ideal fit.
Maintenance
Proper care ensures the longevity and performance of your pillow:
- Removable Cover: The Ver-Tex cover can be machine-washed. Use a cold, gentle cycle. Tumble dry on low heat. Do not bleach or iron.
- Inner Pillow: The inner pillow is spot-clean only. Do not machine wash or submerge the inner pillow in water. Use a mild detergent and a damp cloth to clean any soiled areas. Allow to air dry completely before re-inserting into the cover.
- Avoid Pillowcases: To maximize the cooling properties of the Ver-Tex cover, it is recommended not to use an additional pillowcase.
Image: A close-up of the pillow's Ver-Tex cooling cover texture.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Pillow feels too warm | Using an additional pillowcase; insufficient airflow. | Remove any additional pillowcases. Ensure the Air-X mesh side panels are not obstructed. |
| Pillow feels too firm or too soft | Incorrect side of the pillow being used; pillow size not optimal for sleep position/body type. | Flip the pillow to the other side to experience the alternative firmness. Refer to the "Find Your Fit" chart to ensure you have the correct pillow size. |
| Pillow has an odor | New product scent; moisture buildup. | Allow the pillow to air out in a well-ventilated area for 24-48 hours. Ensure the cover is clean and dry. |
| Cover is difficult to remove/re-install | Improper handling. | Gently work the zipper around the pillow. Ensure the inner pillow is fully compressed when re-installing the cover. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Storm Performance Pillow Size 2.0 |
| Dimensions (L x W x H) | 26" x 20" x 5.75" |
| Fill Material | React Responsive Foam |
| Cover Material | Ver-Tex Cooling Cover |
| Firmness | Medium (Dual-sided: firm and medium-firm) |
| Special Features | Breathable, Conforming Support, Cooling, Hypoallergenic, Removable Cover, Air-X Technology |
| Recommended Sleep Positions | Back Sleeper, Multi-Position Sleeper, Side Sleeper, Stomach Sleeper |
| Item Weight | 6.1 Pounds |
| UPC | 811552034401 |
| Model Number | BGP97AMBP |
Warranty and Support
For specific warranty information regarding your Bedgear Storm Performance Pillow, please refer to the documentation included with your purchase or visit the official Bedgear website. For product support, questions, or concerns, please contact Bedgear customer service directly.
Online Support: www.bedgear.com/support