IREENUO Aquarium LED Light

1. Introduction

Thank you for choosing the IREENUO Aquarium LED Light. This product is designed to provide optimal lighting for your aquatic plants and fish, featuring a remote control for various lighting modes, including a 24-hour automatic sunlight cycle and weather effects. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.

2. Safety Information

• WARNING: This aquarium light is not waterproof. Do not immerse it in water or use it underwater.
• Ensure the power supply is disconnected before performing any maintenance or installation.
• Keep the light and power adapter away from water splashes.
• Do not attempt to disassemble or modify the light.
• Keep out of reach of children.
• Use only the provided power adapter.

3. Package Contents

Verify that all components are present:

• IREENUO Aquarium LED Light (HL-3030, 10W)
• Adjustable Clip-on Bracket
• IR Remote Control (with 1 CR2032 battery included)
• Power Adapter
• Instruction Manual (this document)

4. Setup

4.1 Mounting the Light

1. Attach the adjustable clip-on bracket to the light fixture.
2. Position the light on the edge of your aquarium. The bracket is designed to fit tank walls with a maximum thickness of 0.9 inches (2.3 cm).
3. Tighten the screws on the bracket to secure the light firmly to the tank wall.
4. Adjust the flexible light neck to direct the light as desired over your aquarium.

Image: Adjustable bracket with dimensions and clip mechanism. The bracket can accommodate tank walls up to 0.9 inches (2.3 cm) thick.

Image: Flexible light neck allowing adjustment of the light angle over the aquarium.

4.2 Connecting Power

1. Connect the power adapter to the light's power input.
2. Plug the power adapter into a suitable electrical outlet.

5. Operating Instructions

The IREENUO Aquarium LED Light is controlled via the included IR remote. Ensure the remote is pointed towards the light's receiver for optimal functionality.

Image: Wireless IR Remote Control layout with button descriptions.

5.1 Remote Control Functions

• Power Button: Turns the light On or Off.
• MAX Button: Sets all LEDs to their brightest setting instantly.
• 24/7 Control Mode Buttons (9AM, 12PM, 3PM, 6PM, 3AM, 12AM, 9PM): Activates the 24-hour automatic sunlight cycle. Pressing these buttons sets the current time for the cycle.
• DEMO Button: Provides a quick demonstration of the 24-hour light mode cycle.
• Day/Night Buttons (Sun/Moon icons): Switches between day and night lighting modes.
• 4 Weather Effect Modes (Cloudy, Thunder, Sunny, Moon icons): Activates specific weather simulations for your aquarium.
• Manual Color Adjustment (W, R, G, B with Up/Down arrows): Increases or decreases the intensity of Red, Green, Blue, and White LEDs to customize the light color.
• Memory Keys (M1, M2, M3, M4): Stores custom color settings for quick recall.

5.2 24-Hour Automatic Sunlight Cycle

This mode simulates a natural day-night cycle, gradually changing light intensity and color temperature throughout a 24-hour period. To activate, press any of the 24/7 Control Mode buttons (e.g., 9AM, 12PM) to set the current time. The light will then follow the programmed cycle.

Image: Visual representation of the 24-hour automatic sunlight cycle, showing different light intensities and colors throughout the day and night.

5.3 Weather Effect Modes

Select from four pre-programmed weather effects to add dynamic lighting to your aquarium:

• Cloudy: Simulates overcast conditions.
• Thunder: Creates a lightning effect.
• Sunny: Provides bright, clear daylight.
• Moon: Offers a soft, blue moonlight effect.

Image: Examples of different weather effects (Cloudy, Thunder, Sunny, Moon) provided by the LED light.

6. Maintenance

• Cleaning: Disconnect power before cleaning. Wipe the light fixture with a soft, dry cloth. Do not use abrasive cleaners or immerse the light in water.
• Remote Control Battery: The remote control uses one CR2032 battery. If the remote's range or responsiveness decreases, replace the battery.
• Regular Inspection: Periodically check the power cord and adapter for any signs of damage. If damage is found, discontinue use and contact customer support.

7. Troubleshooting

• Light does not turn on:
  • Ensure the power adapter is securely plugged into both the light and the electrical outlet.
  • Check if the electrical outlet is functional.
  • Verify the power button on the remote or the inline switch is pressed.
• Remote control is unresponsive:
  • Ensure there is a clear line of sight between the remote and the light's receiver.
  • Replace the CR2032 battery in the remote control.
  • Ensure the plastic tab protecting the battery is removed if it's a new remote.
• Light modes are not changing correctly:
  • Ensure the remote control battery is not low.
  • Try resetting the light by unplugging it for a few minutes and then plugging it back in.

8. Specifications

Image: Product packaging with a table of specifications for various models, including the 10W version.

9. Warranty and Support

IREENUO products are manufactured with quality and performance in mind. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official IREENUO website. Please retain your proof of purchase for warranty claims.