Tzumi 6992WM

Tzumi Aura LED Black Light

Model: 6992WM

Introduction

Thank you for choosing the Tzumi Aura LED Black Light. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before operation and retain it for future reference.

Safety Information

Package Contents

Setup

The Tzumi Aura LED Black Light is designed for easy setup. Follow these steps to prepare your device for use:

  1. Unpack: Carefully remove the black light from its packaging.
  2. Install Batteries: Locate the battery compartment. Insert the required batteries (refer to Specifications for battery type) ensuring correct polarity (+/-).
  3. Mounting: This device features a frame mount design. Securely attach the black light to your desired location using appropriate mounting hardware (not included). Ensure the mounting surface is stable and can support the device's weight.
Tzumi Aura LED Black Light device

Image: The Tzumi Aura LED Black Light, showing its tubular design and mounting points.

Operating Instructions

Once set up, operating your Tzumi Aura LED Black Light is straightforward:

  1. Power On/Off: Locate the power button, typically on the side or end of the unit. Press it once to turn the light on. Press it again to turn it off.
  2. Adjust Settings: The device features 3 distinct settings. Each press of the power button (or a dedicated mode button, if present) will cycle through these settings. Experiment to find the desired effect.
  3. Brightness: The light provides a brightness of 500 lumens, optimized for black light effects.
Tzumi Aura LED Black Light in use, illuminating a room

Image: The Tzumi Aura LED Black Light creating a vibrant black light effect in a room, highlighting fluorescent objects.

Maintenance

Proper maintenance ensures the longevity of your Tzumi Aura LED Black Light:

Troubleshooting

If you encounter issues with your Tzumi Aura LED Black Light, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn on.Dead or incorrectly inserted batteries.Replace batteries with new ones, ensuring correct polarity.
Light is dim.Low battery power.Replace batteries.
Light flickers.Loose battery connection or low battery.Check battery compartment for secure connection. Replace batteries if necessary.

If the problem persists after trying these solutions, please contact Tzumi customer support.

Specifications

FeatureDetail
Model Number6992WM
BrandTzumi
Product TypeCE Accessory (LED Black Light)
Power SourceBattery Powered
Brightness500 Lumens
Number of Settings3
Mounting TypeFrame Mount
Water Resistance LevelNot Water Resistant
ColorBlack
MaterialPlastic
Dimensions1 x 1 x 1 inches
Item Weight11.3 ounces
UPC841351169929
ManufacturerDEEJAYLED
Date First AvailableFebruary 5, 2020

Warranty and Support

Specific warranty information for the Tzumi Aura LED Black Light is not provided in this manual. For warranty details, technical support, or service inquiries, please refer to the product packaging or visit the official Tzumi website.

You can also visit the Tzumi Store on Amazon for more information: Tzumi Store