ASHATA Car Phone Holder ASHATA47khfv6zmy User Manual

1. Introduction

This manual provides instructions for the ASHATA Car Multi Function Mobile Phone Bracket Support, model ASHATA47khfv6zmy. Please read this manual carefully before use to ensure proper installation and operation. Keep this manual for future reference.

2. Product Overview

2.1 Components

• 1 x Bracket
• 1 x Knob
• 1 x Spring Support

2.2 Key Features

• 360-Degree Rotation: Allows for flexible viewing angles (horizontal and vertical).
• Secure Spring Clip: Ensures the phone is firmly held and prevents accidental drops.
• Soft Silicone Inner Pad: Protects the phone case from scratches and enhances grip.
• Durable Construction: Made from high-quality plastic and PC material for extended service life.
• Adjustable Viewing: Supports left and right adjustment for optimal line of sight.

Figure 1: The ASHATA Car Phone Holder main unit, showing its adjustable bracket and base.

Figure 2: A close-up view of the holder's grip arms, highlighting the soft silicone inner pads designed to protect your device.

3. Setup and Installation

1. Identify Mounting Location: Choose a suitable location on your car's dashboard or sun visor where the holder can securely clip on without obstructing your view or vehicle controls.
2. Attach Spring Support: Ensure the spring support mechanism is properly attached to the main bracket.
3. Secure the Holder: Open the spring clip at the base of the holder and firmly attach it to the chosen surface. Ensure it is stable and does not wobble.
4. Adjust Knob: Use the knob to tighten or loosen the ball joint, allowing for angle adjustments.

Figure 3: Side view illustrating the spring clip mechanism that secures the phone holder to a surface.

Figure 4: The phone holder installed on a car dashboard, securely holding a smartphone displaying a navigation map.

4. Operating Instructions

1. Inserting Your Phone: Gently pull apart the spring-loaded grip arms of the holder. Place your smartphone between the arms and release them, ensuring the phone is securely gripped by the silicone pads.
2. Adjusting Viewing Angle: Loosen the knob on the ball joint slightly. Adjust your phone to the desired horizontal or vertical orientation and tilt angle. Tighten the knob to lock the position.
3. Removing Your Phone: Gently pull apart the spring-loaded grip arms and carefully remove your smartphone.

Figure 5: The phone holder securely holding a smartphone in a horizontal orientation, suitable for wide-screen navigation or media viewing.

5. Maintenance

• Cleaning: Wipe the holder with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the material.
• Inspection: Periodically check the spring mechanism and knob for any signs of wear or damage. Ensure all parts are securely fastened.
• Storage: When not in use, store the holder in a cool, dry place away from direct sunlight.

6. Troubleshooting

• Phone not holding securely: Ensure the spring clip is fully engaged and the phone is centered between the grip arms. Verify that the silicone pads are clean and free of debris.
• Holder wobbles: Re-check the mounting location and ensure the base clip is firmly attached to a stable surface. Tighten the knob on the ball joint if it feels loose.
• Difficulty adjusting angle: Loosen the knob on the ball joint slightly before attempting to adjust the angle. If it remains stiff, ensure no debris is obstructing the joint.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact your retailer. Keep your purchase receipt as proof of purchase.