Introduction
This manual provides instructions for the BOMAZ Replacement Remote Control, designed for various Hitachi Projector models. This remote is a direct replacement and requires no programming or setup.
Compatible Hitachi Projector Models:
- CP-X206, CP-X250, CP-X253, CP-X255, CP-EX250, CP-EX250N, CP-WX3014WN, CP-X2530WN, CP-BX301WN, CP-CW251WN, CP-X2011N, CP-X2510, CP-X2515WN, CP-AW2519N, CP-X2541WN
- CP-A302WN, CP-AW2519N, CP-AW312WN, CP-D27WN, CP-D32WN, CP-DW25WN, CP-EW250N, CP-X3021WN, CP-X3030WN, CP-W251NM, CP-X4015WN, CP-A221NM
- CP-A221N, CP-A301N, CP-AW251N, CP-EX250, CP-EX300, CP-RX78, CP-RX93, CP-RX94, CP-WX2515WN, CP-WX3015WN, CP-X2015WN, CP-X3015WN, CP-A222WN, CP-A352WN, CP-AW252WN, CP-X2514WN, CP-X3014WN, CP-X4014WN, CP-WX3014WN
- HL02881, R016F, CP-EW300N, CP-EX250N, CP-EX251N, CP-EX300N, CPWX12WN, CPX10WN, CPX11WN, CP-X2021WN, CP-X2515WN, CP-X2521WN, CP-X2530WN, CP-X2011N, CP-X2511N, CP-X3011N, CP-X4011N
Setup
The BOMAZ Replacement Remote Control is designed for immediate use with compatible Hitachi Projectors without any programming required.
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or in the direction indicated by an arrow to open it.
- Insert two (2) AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
Figure 1: Battery Compartment. This image displays the back of the remote control with the battery cover removed, showing the two slots for AA batteries and the spring contacts.
Operating Instructions
This remote control provides full functionality for compatible Hitachi Projectors. Ensure the remote is pointed towards the projector's IR receiver for optimal performance.
Figure 2: Front View of the Remote Control. This image shows the layout of all buttons on the remote, including power, source selection, navigation, volume, and menu controls.
Key Functions
| Button | Function |
|---|---|
| Power Button (●) | Turns the projector On or Off. |
| MY SOURCE / VIDEO / COMPUTER / DOC.CAMERA | Selects the input source for the projector. |
| ASPECT | Adjusts the aspect ratio of the projected image. |
| AUTO | Automatically adjusts the image settings. |
| SEARCH | Initiates a search function (if supported by projector). |
| BLANK | Blanks the projected image. |
| MAGNIFY ON / OFF | Enables or disables image magnification. |
| FREEZE | Freezes the current projected image. |
| PAGE UP / DOWN | Navigates through pages or slides. |
| VOLUME + / - | Adjusts the audio volume. |
| KEYSTONE | Adjusts keystone correction for image distortion. |
| MY BUTTON 1 / 2 | Customizable function buttons (refer to projector manual for setup). |
| MUTE | Mutes or unmutes the audio. |
| FOCUS + / - | Adjusts the image focus. |
| D-ZOOM + / - | Adjusts digital zoom. |
| POSITION | Adjusts the image position. |
| MENU | Opens or closes the projector's on-screen menu. |
| Navigation Arrows (Up, Down, Left, Right) | Navigates through menu options or adjusts settings. |
| ENTER | Confirms a selection or enters a menu. |
| ESC (Escape) | Exits a menu or cancels an operation. |
| RESET | Resets certain projector settings (refer to projector manual). |
Maintenance
Proper maintenance ensures the longevity and optimal performance of your remote control.
- Cleaning: Use a soft, dry cloth to wipe the surface of the remote control. Do not use liquid cleaners, aerosols, or abrasive materials, as these may damage the remote.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AA batteries. Do not mix old and new batteries, or different types of batteries.
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the remote. Store in a cool, dry place.
- Avoid Exposure: Keep the remote control away from direct sunlight, heat sources, moisture, and extreme temperatures.
Troubleshooting
If you encounter issues with your remote control, refer to the following common troubleshooting steps:
| Problem | Possible Cause / Solution |
|---|---|
| Remote is not responding. |
|
| Some buttons are not working. |
|
| Remote works intermittently. |
|
If the issue persists after following these steps, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | R017F (Internal: 70b1fc42-a11b-4b90-8482-ef76bfdc7537) |
| Brand | BOMAZ |
| Compatible Devices | Hitachi Projectors (various models listed in Introduction) |
| Power Source | 2 x AA Batteries (not included) |
| Operable Distance | More than 8 meters |
| Material | ABS Material |
| Color | Black |
| Special Feature | No Programming Required |
| Item Weight | 2.08 ounces |
| Package Dimensions | 8.07 x 4.57 x 1.34 inches |
Warranty and Support
Warranty Information
This product comes with a 90-day warranty from the date of purchase. This warranty covers manufacturing defects and ensures the remote control functions as described.
The product also has a 30-day return policy for refund or replacement, as per the seller's terms.
Customer Support
If you experience any issues with your remote control or have questions not covered in this manual, please contact the seller directly. The seller tests every remote before shipment to ensure functionality.
For support, please refer to your purchase platform or contact the seller "Billy088" via the Amazon platform: Seller Profile