Introduction
Thank you for choosing the Yaheetech 52-inch Multi-Level Pet Cage. This manual provides essential information for the safe and effective assembly, operation, and maintenance of your new pet enclosure. Please read all instructions carefully before use to ensure the well-being of your pets and the longevity of the product.
Image: Front view of the Yaheetech 52-inch Multi-Level Pet Cage, showcasing its multi-tiered design and overall structure.
Safety Information
- Always ensure all cage doors are securely latched to prevent escapes.
- Regularly inspect the cage for any damaged or loose parts that could pose a hazard to your pet.
- The bar spacing of this cage is approximately 2.2 cm (0.87 inches). This spacing may not be suitable for very small animals such as young rats, hamsters, or other pets that can squeeze through narrow gaps. Ensure your pet's head cannot fit through the bars to prevent injury or escape.
- Place the cage on a flat, stable surface. Engage the wheel locks when the cage is in its desired position to prevent accidental movement.
- Keep the cage away from direct sunlight, drafts, and extreme temperatures.
Setup Instructions
While specific step-by-step assembly diagrams are not provided here, the following general guidance will assist in setting up your Yaheetech pet cage. Assembly typically involves connecting the wire panels and securing platforms and ramps.
1. Unpacking and Component Identification
- Carefully remove all components from the packaging.
- Verify that all parts are present and undamaged. Components typically include wire panels, platforms, ramps, a slide-out tray, casters, a water bottle, and a pet bowl.
2. Assembling the Main Structure
- Connect the side, front, and back wire panels to form the main cage structure. Ensure all clips and connectors are firmly engaged.
- Attach the top panel securely.
3. Installing Casters
- Turn the cage base upside down. Insert the four heavy-duty casters into the designated holes at the bottom of the cage legs.
- Ensure casters are firmly seated. Two of the casters typically have locking mechanisms.
Image: The pet cage with key dimensions highlighted, showing its height, width, and depth, along with the included water bottle and food bowl.
4. Placing Platforms and Ramps
- Position the platforms at desired levels within the cage. The cage features detachable ramps and tier panels, allowing for customization of the internal layout.
- Attach the corrugated ramps between platforms to facilitate movement for your pets. Ensure ramps are securely fastened to prevent slipping.
Image: A close-up view of the internal platforms and ramps, designed for pets to climb and explore.
5. Installing Water Bottle and Pet Bowl
- Attach the complimentary wall-mounted water bottle to the cage bars at an appropriate height for your pet.
- Place the pet bowl on one of the platforms or the cage floor.
Operating Instructions
Accessing the Cage
- The cage features multiple doors for easy access to different tiers. Each door is secured with latches to keep your pets safe.
- To open a door, disengage the latch mechanism. To close, ensure the door is flush with the cage frame and the latch is fully engaged.
Image: A detailed view of the cage doors, highlighting the secure latch mechanisms.
Mobility
- The cage is equipped with four heavy-duty rolling casters for convenient movement.
- To move the cage, unlock the casters. To secure the cage in place, engage the caster locks.
Image: Multiple rabbits exploring the various levels and ramps within the Yaheetech pet cage.
Maintenance
Cleaning the Cage
- The 3-door design facilitates easy cleaning of the cage and its tiers.
- A slide-out tray located at the bottom of the cage can be removed for cleaning. This tray collects waste, and a metal mesh separates your pets from direct contact with their droppings.
- Regularly clean the tray with water and a mild, pet-safe detergent. Rinse thoroughly and dry before returning it to the cage.
- Wipe down platforms, ramps, and cage bars as needed to maintain hygiene.
Image: A view of the cage's base, showing the convenient slide-out tray for easy cleaning and waste removal.
Troubleshooting
- Pet Escapes: If your pet is escaping, verify that all doors are securely latched. Re-evaluate the bar spacing (2.2 cm) in relation to your pet's size, especially for smaller or younger animals. Consider adding additional mesh or barriers if necessary.
- Assembly Difficulties: If experiencing issues with parts not fitting or aligning, double-check that all panels are oriented correctly. Sometimes, slight adjustments or gentle force may be required to align components. Refer to any included diagrams for proper orientation.
- Rusting: To prevent rusting, ensure the cage is kept dry and cleaned regularly. Avoid using harsh chemicals that could damage the powder-coated finish. If rust appears, clean the affected area and consider applying a non-toxic, pet-safe rust inhibitor.
- Unstable Platforms/Ramps: Ensure all platforms and ramps are correctly hooked or clipped into place. If they become loose, re-secure them firmly.
Specifications
- Brand: Yaheetech
- Model Number: 610784
- Product Dimensions (L x W x H): 63.5 cm x 43.2 cm x 132.1 cm (approximately 25 in x 17 in x 52 in)
- Bar Spacing (Gap Size): 2.2 cm (approximately 0.87 inches)
- Material: Powder Coated Steel
- Color: Hammertone White
- Features: Multi-level design, rolling casters, slide-out tray, multiple access doors, detachable ramps and platforms, includes water bottle and pet bowl.
Warranty and Support
Specific warranty and support information for this product is not available in this manual. Please refer to your purchase documentation or contact Yaheetech customer service for details regarding warranty coverage, returns, or technical assistance.
