1. Introduction
Thank you for choosing the InnovaGoods BeCalm TENS Electrostimulator V0103008. This device is designed to provide relief, relaxation, and overall well-being through Transcutaneous Electrical Nerve Stimulation (TENS) technology. Please read this manual carefully before use to ensure safe and effective operation.
2. Safety Information
WARNING: Consult your doctor before using this device if you have any pre-existing medical conditions, are pregnant, have a pacemaker, or any other implanted medical device. Do not use on broken skin, sensitive areas, or near the heart. Keep out of reach of children.
- Do not use while driving or operating heavy machinery.
- Do not immerse the device in water.
- Use only the electrodes and accessories provided by the manufacturer.
- Discontinue use if you experience any discomfort or adverse reactions.
3. Package Contents
The InnovaGoods BeCalm TENS Electrostimulator V0103008 package includes:
- 1 x TENS Electrostimulator unit
- 4 x Electrodes
- 4 x Conductive patches
- 2 x AAA batteries
Image 3.1: The product box containing the InnovaGoods BeCalm TENS Electrostimulator and its components.
4. Product Overview
The InnovaGoods BeCalm TENS Electrostimulator is a compact device designed for ease of use. It features a main control unit with a display and buttons for operation, connected to four electrodes via cables. These electrodes deliver gentle electrical impulses to the skin.
Image 4.1: The TENS electrostimulator unit with all four electrodes attached.
5. Setup
- Insert Batteries: Open the battery compartment on the back of the main unit and insert the two AAA batteries, ensuring correct polarity.
- Attach Electrodes: Connect the electrode cables to the main unit. Then, attach the conductive patches to the electrodes.
- Prepare Skin: Ensure the skin where you intend to place the electrodes is clean, dry, and free of oils or lotions.
- Apply Electrodes: Carefully peel the protective film from the conductive patches and firmly place the electrodes on the desired area of your body. Ensure good contact with the skin.
Image 5.1: Proper application of electrodes to the body and holding the control unit.
6. Operating Instructions
- Power On: Press the 'ON/▲' button to turn on the device. The display will light up.
- Select Mode: Press the 'MODE' button to cycle through the available programs. The device offers 8 programs for various types of stimulation.
- Adjust Intensity: Use the 'ON/▲' button to increase intensity and the 'OFF/▼' button to decrease intensity. The device has 10 intensity levels. Start with the lowest level and gradually increase until you feel a comfortable, yet effective, sensation.
- Set Time: (If applicable, based on device features) Some models allow setting a timer for the session duration. Refer to the display for timer options.
- Pause/Stop: Press the 'S/P' button to pause or stop the current program.
- Power Off: Press and hold the 'OFF/▼' button to turn off the device after your session.
Image 6.1: Example of electrode placement on the lower back for TENS therapy.
Instructional Video
Video 6.2: An official demonstration video showing the setup and use of the InnovaGoods BeCalm TENS Electrostimulator.
7. Maintenance and Care
- Cleaning: Wipe the main unit with a soft, damp cloth. Do not use abrasive cleaners or immerse in water.
- Electrode Care: After each use, place the protective film back on the conductive patches to preserve their adhesive quality. Replace electrodes when they lose their stickiness.
- Storage: Store the device and accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Replacement: Replace batteries when the low battery indicator appears on the display or when the device stops functioning.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on | Low or dead batteries; Incorrect battery insertion | Replace batteries; Check battery polarity |
| Weak or no sensation | Electrodes not making good contact; Low intensity setting; Worn out electrodes | Ensure electrodes are firmly applied; Increase intensity; Replace electrodes |
| Irritation on skin | Skin not clean; Allergic reaction to adhesive; Electrodes placed incorrectly | Clean skin thoroughly before use; Discontinue use if irritation persists and consult a doctor; Reposition electrodes |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | V0103008 |
| Material | ABS |
| Intensity Levels | 10 |
| Programs | 8 |
| Electrodes Included | 4 |
| Power Source | 2 x AAA batteries (included) |
| Dimensions | Approx. 19 x 13 x 4 cm |
| Weight | Approx. 180 g |
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official InnovaGoods website.