ADJ Pixie-Strip-60 LED Pixel Strip Instruction Manual

1. Introduction

The ADJ Pixie-Strip-60 is a 1-meter indoor LED pixel strip designed for professional lighting applications. It features 60 tri-color RGB SMD LEDs, offering vibrant and dynamic lighting effects. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your Pixie-Strip-60.

2. Safety Information

• Indoor Use Only: This device is designed for indoor use in dry locations. Do not expose to rain or moisture.
• Power Source: Ensure the power source matches the voltage requirements of the Pixie Driver 2000 (sold separately) and the Pixie-Strip-60.
• Ventilation: Ensure adequate ventilation around the unit to prevent overheating.
• Mounting: Always secure the fixture using the integrated adjustable mounting bracket and safety cable loop.
• Servicing: Refer all servicing to qualified service personnel. Do not attempt to repair the unit yourself.

3. Package Contents

Verify that your package contains the following items:

• ADJ Pixie-Strip-60 LED Pixel Strip
• Square frosted lens attachment
• Round frosted lens attachment
• Square smoked lens attachment
Round smoked lens attachment
• 4-pin power/data cable
• Magnetic end caps (pre-installed or included)

4. Setup

Follow these steps to set up your Pixie-Strip-60:

1. Mounting: Use the integrated adjustable mounting bracket to securely attach the Pixie-Strip-60 to a truss or other suitable structure. Always use a safety cable through the safety cable loop for added security.
2. Lens Attachment: Select the desired lens attachment (square frosted, round frosted, square smoked, or round smoked) and carefully install it onto the front of the LED strip.
3. Connecting to Pixie Driver 2000: The Pixie-Strip-60 requires the Pixie Driver 2000 (sold separately) for power and data. Connect the provided 4-pin combo cable from the Pixie-Strip-60 to the appropriate output port on the Pixie Driver 2000. Ensure connections are firm.
4. Daisy Chaining (Optional): For seamless end-to-end pixel spacing, utilize the magnetic end caps to connect multiple Pixie-Strip-60 units. Ensure proper power and data cabling for all connected units, adhering to the maximum pixel limits of the Pixie Driver 2000.

5. Operating

The Pixie-Strip-60 is controlled via the Pixie Driver 2000 (sold separately).

• Control Options: The Pixie Driver 2000 provides versatile control. It offers simple on-board manual dimming and strobe control for basic operation.
• Pixel Mapping: For advanced control, the Pixie Driver 2000 supports full pixel mapping. It can control up to 2,040 max pixels via Kling-Net protocol and up to 340 max pixels via Art-Net and sACN (streaming ACN) protocols. Refer to the Pixie Driver 2000 manual for detailed pixel mapping instructions.
• Flicker-Free Operation: With a refresh rate of 44,000Hz, the Pixie-Strip-60 ensures flicker-free operation, making it suitable for broadcast TV and film applications.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your Pixie-Strip-60.

• Cleaning: Periodically clean the exterior of the unit with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and disconnected before cleaning.
• Lens Care: Gently wipe the lens attachments to remove dust or smudges. Avoid scratching the lens surface.
• Storage: When not in use, store the Pixie-Strip-60 in a dry, dust-free environment, preferably in its original packaging or a protective case.

7. Troubleshooting

If you encounter issues with your Pixie-Strip-60, refer to the following common troubleshooting steps:

• No Power: Ensure the 4-pin combo cable is securely connected to both the Pixie-Strip-60 and the Pixie Driver 2000. Verify that the Pixie Driver 2000 is powered on and receiving electricity.
• No Data/Incorrect Display: Check all 4-pin combo cable connections. Confirm that the Pixie Driver 2000 is sending the correct data signal and that the Pixie-Strip-60 is configured correctly within the control software (if applicable).
• Flickering: While the unit is designed for flicker-free operation, ensure stable power supply and proper data signal. If flickering persists, consult the Pixie Driver 2000 manual or contact support.
• Overheating: Ensure the unit has adequate ventilation and is not obstructed. If the unit feels excessively hot, power it off and allow it to cool before resuming operation.

8. Specifications

9. Warranty

The ADJ Pixie-Strip-60 is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official ADJ website for detailed warranty terms and conditions. Keep your proof of purchase for warranty claims.

10. Support

For technical assistance, service, or any questions regarding your ADJ Pixie-Strip-60, please contact ADJ customer support. Contact information can typically be found on the official ADJ website or in the product packaging.