Product Overview
The VIVO Electric Stand Up Desk Frame Workstation (Model DESK-V100EW) is designed to provide a height-adjustable base for DIY tabletops, promoting an ergonomic and active workspace. This frame features a single motor for smooth height adjustments and a simple 2-button controller for ease of use.
- Active Workstation Legs: Designed for DIY tables, this ergonomic standing desk frame gives you the height adjustment you want with customization options (table top must be purchased separately).
- Compatibility: Recommended Tabletop Sizes - Length of 37” to 80”, Width of 23” to 43”, and a thickness of 3/4” and greater (Actual Frame Length: 36.8” to 59.7”, Frame Height: 27.6” to 45.7”).
- Solid 154 lbs Support: All-steel construction and a sturdy 2-part column support system hold weights up to 154 lbs, so you can rest easy knowing that your workstation is safe and secure. Leveling feet adapt to nearly any floor surface.
- Electric Lift System: Strong, 2-piece telescopic legs create precise height adjustment, allowing you to go from sitting to standing in seconds. The powerful single motor features 0.8” per second lift speed.
- 2-Button Controller: This simple controller is easy-to-use so you can quickly find your desired height setting.
Safety Information
Please read and understand all instructions before use. Failure to follow these instructions may result in injury or damage to the product. Keep this manual for future reference.
- Do not exceed the maximum weight capacity of 154 lbs (70 kg).
- Ensure all screws and bolts are securely tightened before and during use.
- Keep children and pets away from the desk during operation.
- Avoid placing objects that could fall or be damaged during height adjustments.
- Do not operate the desk if any cables are damaged or frayed.
- If the desk makes unusual noises or movements, discontinue use and consult the troubleshooting section or contact customer support.
Setup and Assembly
Follow these steps to assemble your VIVO Electric Stand Up Desk Frame Workstation. It is recommended to have two people for assembly.
Figure 1: Overview of the VIVO Electric Stand Up Desk Frame Workstation components.
Figure 2: Key dimensions and solid steel construction of the desk frame.
Figure 3: Detailed view of the 2-tier leg design, highlighting the telescopic mechanism.
Assembly Video Guide
For a visual guide on assembly, please watch the official VIVO assembly video:
Video: DESK-V100EB Assembly | Electric Single Motor Desk Frame. This video provides step-by-step instructions for assembling your desk frame.
General Assembly Steps (Refer to video for details)
- Assemble Crossbars to Legs: Attach the left and right crossbars to the leg columns using the provided hardware.
- Secure Side Brackets: Fasten the side brackets to the legs, ensuring they are aligned correctly.
- Assemble Feet to Legs: Attach the feet to the bottom of each leg column.
- Insert Center Crossbar: Slide the center crossbar into the left and right crossbars and secure it.
- Attach Sync Rod: Connect the sync rod to the desk assembly, ensuring smooth operation between the legs.
- Apply Anti-Vibration Pads: Place the anti-vibration pads on the top of the desk frame where the desktop will rest.
- Attach Desktop: Carefully place your chosen desktop onto the assembled frame and secure it using appropriate screws (desktop sold separately).
- Attach Control Panel and Organize Cables: Mount the 2-button control panel to the underside of the desktop and organize all cables using the provided cable management accessories.
Operating Instructions
Your VIVO Electric Stand Up Desk Frame is equipped with a simple 2-button controller for easy height adjustments.
Figure 4: The 2-button control panel for raising and lowering the desk.
- Raise Desk: Press and hold the UP arrow button to raise the desk to your desired standing height.
- Lower Desk: Press and hold the DOWN arrow button to lower the desk to your desired sitting height.
- Release the button at any point to stop the desk at the current height.
Maintenance
Regular maintenance helps ensure the longevity and smooth operation of your desk frame.
- Cleaning: Wipe down the frame with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Cable Management: Periodically check that all cables are securely organized and not pinched or tangled.
- Fasteners: Every few months, check all screws and bolts to ensure they are tight. Retighten if necessary.
- Weight Capacity: Do not overload the desk beyond its 154 lbs (70 kg) weight capacity.
Troubleshooting
If you encounter any issues with your desk frame, refer to the common problems and solutions below.
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected or power outage. | Check power connections and ensure power outlet is functional. |
| Desk moves unevenly or makes unusual noises. | Loose fasteners or obstruction. | Check and tighten all screws and bolts. Ensure no objects are obstructing the legs. |
| Desk stops mid-movement. | Overload protection activated. | Reduce weight on the desk. Wait a few minutes for the motor to cool down before attempting to operate again. |
Specifications
| Feature | Detail |
|---|---|
| Brand | VIVO |
| Model Number | DESK-V100EW |
| Product Dimensions | 23.6"D x 36.8"W x 27.6"H |
| Color | White |
| Style | Modern |
| Base Material | Alloy Steel |
| Special Feature | Electric |
| Maximum Height | 45.7 Inches |
| Minimum Height | 28.6 Inches |
| Maximum Weight Recommendation | 154 Pounds |
| Required Assembly | Yes |
| Included Components | White Electric Single Motor Desk Frame |
| Manufacturer Warranty | 3 year limited warranty |
Warranty and Support
The VIVO Electric Stand Up Desk Frame Workstation (Model DESK-V100EW) comes with a 3-year limited warranty from the manufacturer. For any product inquiries, technical assistance, or warranty claims, please contact VIVO customer support.
You can find additional support and contact information on the official VIVO website or through your retailer.
