SEVERIN Caprice Filter Coffee Machine KA 5761 Instruction Manual

Introduction

Thank you for choosing the SEVERIN Caprice Filter Coffee Machine KA 5761. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new coffee maker. Please read these instructions carefully before first use and keep them for future reference.

Important Safety Instructions

• Read all instructions before operating the appliance.
• Do not immerse the appliance, cord, or plug in water or other liquids.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Contact customer service for examination, repair, or adjustment.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Exercise extreme caution when disposing of hot steam.
• The thermal carafe is designed for use with this appliance only. It must never be used on a range top.
• Do not clean the thermal carafe with abrasive cleaners, steel wool pads, or other abrasive materials.

Product Overview

Familiarize yourself with the components of your SEVERIN Caprice Filter Coffee Machine.

Figure 1: Exploded view of the coffee machine components.

Figure 2: Front view of the assembled coffee machine.

Components:

1. Water Tank (with lid and water level markings)
2. Filter Holder (removable)
3. Thermal Carafe (stainless steel with lid and handle)
4. Control Panel (with LED display and buttons)
5. Main Unit (housing and heating element)
6. Brew Strength Selector Knob

Setup and First Use

1. Unpacking and Initial Cleaning:

• Remove all packaging materials and promotional labels from the coffee machine.
• Wipe the exterior of the machine with a damp cloth.
• Wash the thermal carafe, its lid, and the removable filter holder in warm, soapy water. Rinse thoroughly and dry.

2. Positioning the Machine:

• Place the coffee machine on a stable, level, heat-resistant surface, away from water sources.
• Ensure adequate ventilation around the appliance.

3. First Use (Cleaning Cycle):

Before brewing coffee for the first time, run a cleaning cycle with water only to remove any manufacturing residues.

1. Fill the water tank with fresh, cold water up to the MAX mark (1.0 L).
2. Place an empty paper filter (size #4) into the filter holder, or ensure the reusable filter is clean and in place.
3. Place the thermal carafe with its lid securely on the warming plate.
4. Plug the appliance into a suitable power outlet.
5. Press the power button to start the brewing cycle.
6. Allow the full cycle to complete. Discard the hot water from the carafe.
7. Repeat this process once or twice to ensure thorough cleaning.

Operating Instructions

Brewing Coffee:

1. Fill the Water Tank: Open the lid of the water tank and fill it with fresh, cold water according to the desired number of cups. The tank has clear markings for easy measurement. Close the lid securely.
   

   Figure 3: Filling the water reservoir.

2. Add Coffee Grounds: Remove the filter holder. Insert a size #4 paper filter or ensure the reusable filter is clean. Add your desired amount of ground coffee. A general guideline is one tablespoon of coffee per cup (150ml). Place the filter holder back into its position.
   

   Figure 4: Adding coffee grounds to the filter holder.
3. Position the Thermal Carafe: Ensure the thermal carafe is empty and its lid is properly closed. Place it firmly on the base plate beneath the filter holder.
4. Select Brew Strength: Turn the brew strength selector knob to choose between a mild/balanced or strong/full-bodied coffee profile. The LED display may indicate the selected profile.
   

   Figure 5: Adjusting the brew strength.

5. Start Brewing: Press the power button on the control panel. The machine will begin the innovative cascade brewing process, heating water to the ideal temperature (92-96 °C) before dispensing it over the coffee grounds. The LED display will show the brewing progress.
   

   Figure 6: Control panel with illuminated buttons.

6. Serving: Once brewing is complete, the machine will automatically shut off. The thermal carafe will keep your coffee hot for an extended period. Carefully remove the carafe and pour your coffee.
   

   Figure 7: Pouring coffee from the thermal carafe.

Using the Timer Function:

The integrated timer allows you to program the machine to start brewing at a specific time.

1. Prepare the coffee machine as described in steps 1-3 of "Brewing Coffee".
2. Press the timer button (often indicated by a clock icon) on the control panel.
3. Use the hour and minute buttons (or a rotating dial, depending on the model) to set your desired brewing start time.
4. Confirm the setting (if required, by pressing the timer button again or the power button). The timer indicator on the LED display will light up.
   

   Figure 8: Setting the timer function.
5. The machine will automatically start brewing at the programmed time.

Maintenance and Cleaning

Regular cleaning and maintenance ensure optimal performance and extend the lifespan of your coffee machine.

Daily Cleaning:

• Always unplug the appliance before cleaning.
• Remove the filter holder and discard the used coffee grounds and paper filter. Wash the filter holder and the thermal carafe (including its lid) in warm, soapy water. Rinse thoroughly and dry.
  

  Figure 9: Cleaning the removable filter holder.
• Wipe the exterior of the coffee machine with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
• Do not immerse the main unit in water or any other liquid.

Descaling:

Mineral deposits from water can build up in your coffee machine over time, affecting performance and coffee taste. Descale your machine regularly, depending on water hardness and frequency of use (e.g., every 1-3 months).

1. Use a commercially available descaling solution suitable for coffee machines, or a mixture of white vinegar and water (1:1 ratio).
2. Fill the water tank with the descaling solution up to the MAX mark.
3. Place an empty filter in the filter holder and the thermal carafe on the base.
4. Start a brewing cycle. Allow about half of the solution to brew through, then turn off the machine and let it sit for 15-20 minutes to allow the solution to work.
5. Turn the machine back on and let the remaining solution brew through.
6. After the descaling cycle, run at least two full cycles with fresh, clean water to rinse out any descaling residue.

Troubleshooting

Specifications

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Severin website. You may also contact Severin customer service directly for assistance.