Introduction
Thank you for choosing the Kruger&Matz KM0490 Traveler K20 Bluetooth Headset. This manual provides essential information for the safe and efficient use of your device. Please read these instructions carefully before use and retain them for future reference.
Package Contents
Ensure all items are present in the package:
- Kruger&Matz KM0490 Traveler K20 Bluetooth Headset
- Micro USB Charging Cable
- 3 x Silicone Ear Tips (various sizes)
- 3 x Foam Ear Tips (various sizes)
- User Manual (this document)
Image: Included accessories, showing the micro USB charging cable and six interchangeable ear tips (three silicone, three foam).
Product Overview
The Kruger&Matz KM0490 Traveler K20 is a versatile Bluetooth headset designed for clear communication and convenient audio control. It features active noise cancellation and multi-point connectivity.
Image: Front view of the headset, showing the main body, ear hook, and microphone boom.
Image: Side view of the headset, illustrating the location of the control buttons on the main body.
Setup
1. Charging the Headset
- Connect the micro USB charging cable to the charging port on the headset.
- Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The indicator light will show charging status (e.g., red for charging, blue for fully charged).
- Allow approximately 1-2 hours for a full charge.
2. Pairing with a Device
- Ensure the headset is fully charged and turned off.
- Press and hold the Multi-function Button (MFB) for approximately 5-7 seconds until the indicator light flashes red and blue alternately. This indicates pairing mode.
- On your mobile phone or other Bluetooth-enabled device, enable Bluetooth and search for available devices.
- Select "KM0490" or "Traveler K20" from the list of found devices.
- If prompted for a password, enter "0000".
- Once successfully paired, the indicator light will flash blue slowly.
Operating Instructions
Power On/Off
- Power On: Press and hold the MFB for 3 seconds until the blue indicator light flashes.
- Power Off: Press and hold the MFB for 5 seconds until the red indicator light flashes and then turns off.
Call Management
- Answer Call: Press the MFB once.
- End Call: Press the MFB once during a call.
- Reject Call: Press and hold the MFB for 2 seconds.
- Redial Last Number: Double-press the MFB.
- Voice Dialing: Press the MFB once when not on a call (if supported by your device).
Music Control
- Play/Pause: Press the MFB once.
- Next Track: Press the Volume Up button for 2 seconds.
- Previous Track: Press the Volume Down button for 2 seconds.
- Volume Up: Press the Volume Up button briefly.
- Volume Down: Press the Volume Down button briefly.
Multi-point Connection
The headset can connect to two Bluetooth devices simultaneously.
- Pair the headset with the first device as described in the "Pairing with a Device" section.
- Disable Bluetooth on the first device.
- Put the headset back into pairing mode (red and blue flashing).
- Pair the headset with the second device.
- Re-enable Bluetooth on the first device. The headset should automatically connect to both devices.
Wearing the Headset
The KM0490 Traveler K20 is designed for comfortable wear on either the right or left ear. The microphone boom can be rotated to suit your preference.
Image: Diagram illustrating how the headset sits on the ear for proper fit.
Image: Diagram demonstrating the 200-degree rotation of the microphone boom and 180-degree rotation of the ear hook for ambidextrous use.
Experiment with the included silicone and foam ear tips to find the most comfortable and secure fit for optimal sound quality and noise isolation.
Noise Reduction Feature
The KM0490 Traveler K20 incorporates an active noise reduction function to minimize ambient sounds, ensuring your voice is clear during calls, even in noisy environments like a car or outdoors.
Image: Visual representation of the headset's noise cancellation feature, with sound waves indicating reduced ambient noise.
Maintenance
- Clean the headset regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Keep the charging port free of dust and debris.
- Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid dropping the headset or subjecting it to strong impacts.
- The headset is waterproof; however, avoid prolonged submersion in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headset does not turn on | Low battery | Charge the headset fully. |
| Cannot pair with device | Headset not in pairing mode; Bluetooth off on device; device too far | Ensure headset is in pairing mode (red/blue flashing). Turn on Bluetooth on your device. Move device closer to headset. |
| No sound or poor sound quality | Volume too low; headset not connected; interference | Adjust volume on headset and device. Reconnect headset. Move away from other wireless devices. |
| Microphone not working | Microphone muted; headset not selected as audio input | Check device settings to ensure headset microphone is selected. |
Specifications
| Feature | Specification |
|---|---|
| Brand | Kruger&Matz |
| Model Name | Traveler K20 |
| Model Number | KM0490 |
| Connectivity Technology | Wireless (Bluetooth) |
| Special Features | Microphone included, Active Noise Cancellation |
| Control Type | Voice Control |
| Compatible Devices | Mobile phones, tablets, laptops, game consoles, smart speakers |
| Battery Composition | Lithium Polymer |
| Water Resistance Level | Waterproof |
| Material | Leather |
| Included Components | Micro USB cable, 3x silicone ear tips, 3x foam ear tips, instruction manual |
Warranty and Support
For warranty information and technical support, please refer to the official Kruger&Matz website or contact their customer service directly. Keep your proof of purchase for any warranty claims.