1. Introduction
Thank you for choosing the BENYAR BY-5175 Quartz Chronograph Watch. This timepiece combines classic design with modern functionality, featuring a precise Japanese quartz movement and a durable construction. This manual will guide you through the features, setup, and care to ensure long-lasting performance and enjoyment of your watch.
Figure 1: Front view of the BENYAR BY-5175 Quartz Chronograph Watch. This image displays the watch's blue dial, silver-tone stainless steel case, and mesh band, highlighting its elegant and sporty design.
2. Watch Components
Familiarize yourself with the main components of your BENYAR watch:
- Crown: Used for setting the time and date.
- Pushers (A & B): Used to operate the chronograph functions.
- Main Dial: Displays hours, minutes, and seconds.
- Sub-dials: Include 1/10 second, minute, and second counters for the chronograph.
- Date Window: Displays the current date.
- Mesh Band: Comfortable and breathable stainless steel band.
- Case Back: Engraved with model and water resistance information.
Figure 2: Diagram illustrating the functions of the watch's crown and pushers, along with the specific roles of the 1/10 second, minute, and second sub-dials.
3. Initial Setup
3.1. Setting the Time
- Pull the crown out to the second click position.
- Rotate the crown to set the hour and minute hands. Ensure the AM/PM is correctly set if your watch has a 24-hour indicator or if setting the date.
- Push the crown back to the normal position to start the watch.
3.2. Setting the Date
- Pull the crown out to the first click position.
- Rotate the crown to set the date.
- Push the crown back to the normal position.
Note: Avoid setting the date between 9:00 PM and 3:00 AM, as this may damage the date mechanism.
4. Operating the Chronograph
The chronograph function allows you to measure elapsed time with precision.
- Start/Stop: Press Pusher A (top pusher) to start the chronograph. Press Pusher A again to stop it.
- Reset: While the chronograph is stopped, press Pusher B (bottom pusher) to reset all chronograph hands to their zero positions.
The sub-dials will display the measured time: the 1/10 second dial, the minute dial, and the second dial.
5. Care and Maintenance
5.1. Water Resistance
Your BENYAR BY-5175 watch is 3ATM (30 meters) water resistant. This means it can withstand:
- Daily splashes.
- Brief immersion in water (e.g., washing hands).
Important Limitations:
- DO NOT use for swimming, showering, diving, or snorkeling.
- DO NOT operate the crown or pushers when the watch is wet or submerged.
- DO NOT use in a foggy environment, as specified in the product directions.
5.2. Cleaning
Wipe the watch case and band with a soft, dry cloth regularly to remove dirt and moisture. For the mesh band, a soft brush can be used to clean between the links.
5.3. Battery Replacement
The watch uses a product-specific battery. When the watch stops or the second hand jumps irregularly, it's time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.
6. Troubleshooting
If you encounter any issues with your watch, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch not running | Dead battery; Crown not pushed in; Internal malfunction. | Check crown position; Replace battery; Contact customer service. |
| Incorrect time/date | Time/date not set correctly; Crown pulled out. | Refer to Section 3 for setting instructions; Push crown fully in. |
| Chronograph hands not resetting to zero | Requires calibration. | Consult a watch technician for calibration. |
| Condensation under crystal | Exposure to extreme temperature changes or moisture ingress. | Avoid extreme temperature changes; If persistent, seek professional service. |
If the problem persists after attempting these solutions, please contact our customer service for assistance.
7. Specifications
Detailed technical specifications for the BENYAR BY-5175 watch:
- Movement: Japanese Imported Quartz Analogue Movement
- Case Material: Alloy
- Band Material: Stainless Steel Mesh
- Lens Material: Mineral Glass
- Case Diameter: 45 Millimetres
- Case Thickness: 14 Millimetres
- Band Color: Silver
- Water Resistance: 3 ATM (30 Meters)
- Item Weight: 249 g (0.25 Kilograms)
- Battery: 1 Product Specific battery (included)
- Included Components: Stainless Steel Bracelet (referring to the mesh band)
Figure 3: Diagram showing the key dimensions of the watch, including case diameter, case thickness, and overall band length.
8. Warranty and Support
BENYAR is committed to providing high-quality products and excellent customer service. Your watch is covered by a manufacturer's warranty against defects in materials and workmanship under normal use.
For any questions about the product, warranty claims, or technical support, please contact our after-sales service team. We are dedicated to providing you with a satisfactory solution.
Please retain your purchase receipt as proof of purchase for warranty purposes.
