Supershieldz Y88X Pro

Download PDF
Contents

Supershieldz Anti-Glare Screen Protector User Manual

For Dragon Touch Y88X Pro and Y88X Plus Kids Tablet (7 inch)

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Supershieldz Anti-Glare Screen Protector. Designed specifically for the Dragon Touch Y88X Pro and Y88X Plus 7-inch Kids Tablets, this screen protector offers enhanced screen protection, reduces glare, and minimizes fingerprints, ensuring a clear and responsive user experience.

Supershieldz screen protector packaging and a tablet with the protector applied.

Image 1.1: Supershieldz Anti-Glare Screen Protector packaging and a Dragon Touch Y88X Pro tablet with the protector installed.

2. Setup and Installation

Proper installation is crucial for optimal performance. Please follow these steps carefully.

2.1. What's Included

  • 3 x Supershieldz Anti-Glare Screen Protectors
  • Microfiber Cleaning Cloth
  • Dust Removal Sticker
  • Squeegee Card

2.2. Preparation

  1. Ensure your tablet is powered off and clean your hands thoroughly to avoid transferring oils or dirt to the screen.
  2. Find a dust-free environment for installation.
  3. Use the provided microfiber cloth to wipe the tablet screen clean.
  4. Use the dust removal sticker to lift any remaining dust particles from the screen. Ensure the screen is completely free of dust, smudges, and fingerprints.

2.3. Application Steps

  1. Carefully peel back a small portion of the protective film labeled 'Step 1' or 'Back' from one corner of the screen protector. Avoid touching the adhesive side.
  2. Align the exposed adhesive edge of the screen protector with the corresponding edge of your tablet screen. Pay close attention to cutouts for cameras, sensors, and buttons.
  3. Once aligned, slowly and steadily peel off the rest of the 'Step 1' film while simultaneously applying the screen protector to the tablet surface. Use the squeegee card to gently push out any air bubbles as you go, working from the center outwards.
  4. After the screen protector is fully applied, carefully peel off the top protective film labeled 'Step 2' or 'Front'.
  5. Use the microfiber cloth to gently wipe down the newly installed screen protector, removing any remaining small bubbles or smudges. Small bubbles typically disappear within 24-48 hours.
A Dragon Touch Y88X Pro tablet with the Supershieldz screen protector perfectly applied.

Image 2.1: Dragon Touch Y88X Pro tablet with the screen protector installed.

3. Operating Features

The Supershieldz Anti-Glare Screen Protector is engineered with multiple layers to enhance your tablet's usability and protection.

  • Anti-Glare (Matte) Finish: Reduces reflections and glare from ambient light, making your tablet screen easier to view in bright conditions.
  • Anti-Fingerprint Coating: Minimizes smudges and fingerprints, keeping your screen cleaner and clearer.
  • Real Touch Sensitivity: Maintains the original touch screen accuracy and responsiveness of your tablet, ensuring a natural feel.
  • Scratch Resistance: Protects your screen from daily scratches, dust, and minor abrasions.
Diagram illustrating the multi-layer construction of the Supershieldz Premium Anti-Glare Film.

Image 3.1: Multi-layer structure of the Premium Anti-Glare Film, designed for sensitivity and protection.

4. Maintenance

To maintain the clarity and effectiveness of your screen protector, follow these simple cleaning guidelines:

  • Use a clean, soft, lint-free microfiber cloth to gently wipe the screen protector.
  • For stubborn smudges, lightly dampen the microfiber cloth with water or a screen cleaner specifically designed for electronics. Avoid harsh chemicals, alcohol, or abrasive materials.
  • Do not spray cleaning solutions directly onto the screen protector. Apply to the cloth first.

5. Troubleshooting

Here are solutions to common issues you might encounter during or after installation:

IssueSolution
Bubbles under the screen protectorUse the squeegee card to push bubbles towards the nearest edge. For small bubbles, they often disappear within 24-48 hours. Ensure the screen was dust-free during installation.
Dust particles trapped under the protectorCarefully lift the nearest corner of the screen protector with a piece of tape. Use another piece of tape to dab and remove the dust particle from the screen or the adhesive side of the protector. Reapply slowly.
Screen protector is misalignedIf applied recently, gently lift the screen protector from one corner and re-align. If the adhesive has fully set, it may be difficult to reposition without damaging the protector or introducing dust. Consider using one of the other protectors from the pack.
Reduced touch sensitivityEnsure the screen protector is fully adhered without air gaps. If the issue persists, verify tablet settings for touch sensitivity. This protector is designed for real touch sensitivity, so significant reduction is unlikely if installed correctly.

6. Specifications

FeatureDetail
BrandSupershieldz
Compatible DevicesDragon Touch Y88X Pro / Y88X Plus Kids Tablet (7 inch)
MaterialPolyethylene Terephthalate (PET)
Finish TypeMatte (Anti-Glare, Anti-Fingerprint)
Item Hardness9H
Product Dimensions6.77"L x 4.09"W
Unit Count3 Count
Special FeaturesAnti-glare matte finish, high-quality Japanese PET film, real touch sensitivity

7. Warranty and Support

For any questions, concerns, or support regarding your Supershieldz Anti-Glare Screen Protector, please contact Supershieldz customer service. Refer to the product packaging or the Supershieldz official website for contact information.

Supershieldz stands behind the quality of its products. Please retain your proof of purchase for any warranty claims.

© 2025 Supershieldz. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.