Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MARIE Automatic Door Closer, Size 2. Designed for residential and light commercial doors weighing between 55 and 99 lbs (25-45 kg) and up to 32 inches (80 cm) wide, this hydraulic door closer ensures smooth and controlled door closure. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product.
The MARIE Automatic Door Closer features independently adjustable closing and latching speeds, allowing for customized door control. It is suitable for various door types including metal, fire, wood, and glass doors with frames.
Safety Information
- Always wear appropriate safety gear, including eye protection, during installation.
- Ensure the door closer is installed by a competent individual.
- Do not over-tighten screws, as this may damage the door or closer.
- Never attempt to unscrew the valves completely from the door closer body, as this will cause oil leakage and render the unit unusable.
- Keep children and pets away from the door during installation and adjustment.
Package Contents
Verify that all components are present before beginning installation:
- Door Closer Body
- Main Arm Assembly (Rocker Arm and Screw Stem)
- Parallel Arm Bracket (for parallel arm applications)
- Mounting Hardware (screws, nuts)
- Installation Template
- Instruction Manual
Figure 1: Overview of MARIE Automatic Door Closer components.
Installation
The MARIE Automatic Door Closer supports three main installation methods: Regular Arm, Top Jamb, and Parallel Arm. Choose the method appropriate for your door and frame configuration.
General Installation Notes:
- Ensure the door and door frame are on the same plane or within 5cm. If not, a parallel plate with installation may be required.
- Use the provided installation template to mark pilot holes accurately.
- All screws must be tightened securely.
Installation Method 1: Regular Arm (Pull Side)
This method is suitable for doors that open inwards (pull side). The door closer body is mounted on the door, and the arm assembly is mounted on the door frame.
- Step 1: Mark Pilot Holes. According to the desired opening angle, select the appropriate installation dimensions from the template. Mark the pilot holes on the door and door frame.
- Step 2: Mount Main Body and Holder. Separate the rocker arm and screw stem. Drill the pilot holes. Mount the main door closer body onto the door using the provided screws. Mount the holder for the arm assembly onto the door frame. Ensure the regulating valve on the door closer body faces the door hinge.
- Step 3: Connect Arm Assembly. Using composite screws, connect the rocker arm to the main body.
- Step 4: Adjust Screw Stem Length. Adjust the length of the screw stem. Connect the rocker arm with the screw stem. Ensure the screw stem is perpendicular to the door when the door is closed.
Video 1: Regular Arm Installation Guide. This video demonstrates the step-by-step process for installing the door closer using the regular arm configuration on the pull side of the door.
Installation Method 2: Top Jamb (Push Side)
This method is used when the door opens outwards (push side). The door closer body is mounted on the door frame, and the arm assembly is mounted on the door.
- Step 1: Mark Pilot Holes. Based on the desired opening angle, select the appropriate installation dimensions from the template. Mark the pilot holes on the door and door frame.
- Step 2: Mount Main Body and Holder. Separate the rocker arm and screw stem. Drill the pilot holes. Mount the main door closer body onto the door frame. Mount the holder for the arm assembly onto the door. Ensure the regulating valve on the door closer body faces away from the door hinge.
- Step 3: Connect Arm Assembly. Using composite screws, connect the rocker arm to the main body.
- Step 4: Adjust Screw Stem Length. Adjust the length of the screw stem. Connect the rocker arm with the screw stem. Ensure the screw stem is parallel to the door when the door is closed.
Video 2: Top Jamb Installation Guide. This video illustrates the installation process for the top jamb configuration, typically used for doors opening outwards.
Installation Method 3: Parallel Arm (Push Side)
This method is also for doors that open outwards (push side), but the arm is mounted parallel to the door frame. This is often used when there isn't enough space for a top jamb mount or for aesthetic reasons.
- Step 1: Mark Pilot Holes. Based on the desired opening angle, select the appropriate installation dimensions from the template. Mark the pilot holes on the door and door frame.
- Step 2: Mount Main Body and Parallel Board. Separate the rocker arm and screw stem. Drill the pilot holes. Mount the main door closer body onto the door. Mount the parallel arm bracket onto the door frame. Ensure the regulating valve on the door closer body faces away from the door chain.
- Step 3: Connect Arm Assembly. Using composite screws, connect the rocker arm to the main body.
- Step 4: Adjust Screw Stem Length. Adjust the length of the screw stem. Connect the rocker arm with the screw stem. Ensure the screw stem is parallel to the door when the door is closed.
Video 3: Parallel Arm Installation Guide. This video demonstrates the parallel arm installation method, often preferred for outward-opening doors or specific aesthetic requirements.
Video 4: How to Install Marie Door Closer with Parallel Plate. This video provides a practical demonstration of installing the door closer with a parallel plate, showing real-world application.
Video 5: General Door Closer Installation Guide. This video offers a comprehensive overview of the installation process, useful for understanding the overall procedure.
Operating and Adjustment
The MARIE Automatic Door Closer features two independent valves for adjusting closing and latching speeds. These adjustments allow you to customize the door's closing behavior for optimal performance and safety.
Speed Adjustment Valves:
- Valve 1 (Closing Speed): Controls the main closing speed of the door from its fully open position (e.g., 180°) down to approximately 15° before closing.
- Valve 2 (Latching Speed): Controls the final latching speed of the door, from approximately 15° to 0° (closed position). This prevents the door from slamming.
Attention: These valves must not be screwed out of the door closer body, as this will cause oil leakage and permanent damage.
Adjustment Procedure:
- To increase speed, turn the valve screw counter-clockwise.
- To decrease speed, turn the valve screw clockwise.
- Make small adjustments (e.g., quarter turns) and test the door's closing action after each adjustment.
Figure 2: Adjustable Sweeping and Latching Speed. This diagram illustrates the location and function of the two adjustment valves.
Figure 3: Soft Close, Quiet & Buffer. Proper adjustment prevents the door from slamming and ensures a gentle close.
Figure 4: Adjustable Speed Zones. This graphic details how Valve 1 controls the closing speed from 180° to 15°, and Valve 2 controls the latching speed from 15° to 0°.
Maintenance
The MARIE Automatic Door Closer is designed for durability and minimal maintenance. It utilizes stable hydraulic door check fluid for consistent operation across various climates and provides constant lubrication.
- Regular Inspection: Periodically check all mounting screws for tightness. Re-tighten if necessary.
- Cleanliness: Keep the door closer body and arm assembly clean from dust and debris to ensure smooth operation.
- Lubrication: The internal mechanism is self-lubricating. No external lubrication is typically required.
- Fluid Leaks: If you notice any fluid leakage, discontinue use and contact customer support. Do not attempt to repair the hydraulic system yourself.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Door closes too fast. | Closing speed (Valve 1) or latching speed (Valve 2) is set too high. | Turn Valve 1 and/or Valve 2 screw(s) clockwise (tighten) in small increments to decrease speed. Test after each adjustment. |
| Door closes too slowly or does not close completely. | Closing speed (Valve 1) or latching speed (Valve 2) is set too low. | Turn Valve 1 and/or Valve 2 screw(s) counter-clockwise (loosen) in small increments to increase speed. Test after each adjustment. |
| Door slams shut. | Latching speed (Valve 2) is too fast. | Turn Valve 2 screw clockwise (tighten) in small increments to slow down the latching action. |
| Oil leakage from the closer body. | Valves may have been unscrewed too far or internal seal damage. | Do not attempt to repair. Contact customer support for assistance. |
| Door closer arm is not parallel/perpendicular to the door/frame. | Incorrect arm length adjustment during installation. | Re-adjust the screw stem length as per installation instructions to ensure correct alignment. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 1102W |
| Size | Size 2 |
| Applicable Door Weight | 55-99 lbs (25-45 kg) |
| Applicable Door Width | Up to 32 inches (80 cm) |
| Installation Type | Screw-In (Regular Arm, Top Jamb, Parallel Arm) |
| Material | Aluminum |
| Color | White |
| Item Weight | 2.33 pounds (1.06 kg) |
| Package Dimensions | 16.14 x 4.65 x 4.45 inches |
| Certifications | CE, UL |
| Recommended Uses | Residential and commercial doors, exterior/interior doors, fire doors, hotels, condominiums, apartment complexes, warehouses. |
Figure 5: Power Adjustment of Arm Shoe. This image illustrates how to adjust the arm shoe to effectively increase or decrease the closing power, corresponding to different EN sizes and door weights.
Figure 6: Wide Application. The door closer is suitable for various door types, including metal, fire, wood, and glass doors with frames, provided the door and frame are on the same plane or within 5cm.
Figure 7: Suitable for Push/Pull Doors. The door closer can be installed for both push and pull side applications, depending on the chosen installation method.
Figure 8: Can be Used Indoors & Outdoors. The door closer is designed to be weather-proof, heat-resistant, frost-resistant, and anti-rust, making it suitable for both indoor and outdoor use.
Warranty
All MARIE hydraulic door closers are warranted for Five years from the date of purchase. If you are not satisfied with the product, returns or exchanges are accepted within 30 days. For any quality problems with the door closer, please contact customer support for resolution.
Customer Support
For further assistance, technical support, or warranty claims, please contact MARIE Hardware customer service. You can also visit the official MARIE store for more product information and resources.
Brand: MARIE
Manufacturer: Marie
Visit the MARIE Store: MARIE Store on Amazon