MIPRO MU-55HNSX

MU-55HNSX Dual Ear Omni-Directional Headworn Condenser Microphone User Manual

Model: MU-55HNSX | Brand: MIPRO

Product Overview

The MIPRO MU-55HNSX is a professional-grade dual-ear omni-directional headworn condenser microphone designed for clear and consistent audio capture. Featuring a 4.5mm capsule and a mini-XLR connector, this microphone is suitable for various applications requiring hands-free operation and high-quality sound reproduction. Its water-proof design enhances durability and reliability in diverse environments.

MIPRO MU-55HNSX Dual Ear Headworn Microphone in Beige

Figure 1: The MIPRO MU-55HNSX Dual Ear Omni-Directional Headworn Condenser Microphone. This image shows the beige-colored microphone with its dual ear hooks, flexible boom arm, and the microphone capsule at the end of the boom, along with the connecting cable.

Setup Instructions

  1. Unpacking: Carefully remove the microphone from its packaging. Inspect for any visible damage.
  2. Positioning: Place the dual ear hooks over both ears, ensuring a comfortable and secure fit. The microphone boom arm should extend from one side of your head towards your mouth.
  3. Adjusting the Boom Arm: Gently bend the flexible boom arm to position the microphone capsule approximately 1-2 cm (0.4-0.8 inches) from the corner of your mouth. Ensure the capsule is not directly in front of your mouth to avoid plosive sounds.
  4. Connecting to Transmitter: Connect the mini-XLR connector of the microphone cable to the input jack of your compatible wireless bodypack transmitter or wired audio interface. Ensure the connection is firm and secure.
  5. Cable Management: Route the microphone cable discreetly down your back or side, securing it with clips if necessary, to prevent snagging or interference during movement.
  6. Powering On: Once connected, power on your transmitter/audio interface according to its specific instructions.

Operating the Microphone

  • Sound Check: Before use, perform a sound check to verify audio levels and clarity. Speak at your normal volume and adjust the gain on your transmitter or mixer as needed.
  • Omni-Directional Pickup: The MU-55HNSX features an omni-directional polar pattern, meaning it picks up sound equally from all directions. This provides a natural sound and reduces the need for precise microphone aiming.
  • Minimizing Feedback: When using with loudspeakers, position speakers away from the microphone and adjust gain levels carefully to prevent audio feedback.
  • Environmental Considerations: While water-proof, avoid submerging the microphone. For optimal performance, use in environments free from excessive wind noise or direct impact.

Maintenance and Care

  • Cleaning: After each use, gently wipe the microphone capsule and boom arm with a soft, dry cloth to remove any moisture or debris. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying.
  • Storage: Store the microphone in a clean, dry place, preferably in its original case or a protective pouch, to prevent dust accumulation and physical damage.
  • Cable Care: Avoid sharp bends or kinks in the cable. Do not pull the cable to disconnect; always grasp the connector itself.
  • Water Resistance: The microphone is water-proof, but prolonged exposure to water or harsh chemicals should be avoided. Dry thoroughly if it becomes wet.

Troubleshooting

ProblemPossible CauseSolution
No Sound Output
  • Microphone not connected properly.
  • Transmitter/receiver not powered on.
  • Gain levels too low.
  • Faulty cable.
  • Ensure mini-XLR connector is fully inserted.
  • Check power status of all connected devices.
  • Increase gain on transmitter/mixer.
  • Test with a different cable if available.
Low Volume/Weak Signal
  • Microphone too far from mouth.
  • Incorrect gain settings.
  • Adjust boom arm to position microphone closer to mouth.
  • Increase gain on transmitter/mixer.
Distorted Sound
  • Gain levels too high (clipping).
  • Microphone too close to mouth.
  • Decrease gain on transmitter/mixer.
  • Reposition microphone slightly further from mouth.

Specifications

  • Model: MU-55HNSX
  • Brand: MIPRO
  • Microphone Type: Condenser
  • Polar Pattern: Omni-directional
  • Capsule Diameter: 4.5mm
  • Connectivity: Mini-XLR (3-pin)
  • Color: Beige (Note: Product description may refer to black, but the primary product title indicates beige.)
  • Special Features: Water-proof design
  • Included Components: Microphone
  • Item Weight: Approximately 2 pounds (0.91 kg)
  • Manufacturer: MiPro

Warranty and Support

MIPRO products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official MIPRO website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact MIPRO customer support directly or your authorized dealer.

MIPRO Official Website: www.mipro.com.tw

Note: Warranty terms and conditions may vary by region. Please retain your proof of purchase for warranty claims.

© 2024 MIPRO. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.