SouthMarine 5040140 5032238

Download PDF
Contents

SouthMarine Fuel Filter 5040140 5032238 Instruction Manual

For Evinrude Johnson OMC Outboard Engines (4HP, 6HP, 9.8HP, 15HP)

Introduction

This manual provides essential instructions for the installation, operation, and maintenance of your SouthMarine Fuel Filter, model numbers 5040140 and 5032238. This fuel filter is designed to ensure clean fuel delivery to your outboard engine, protecting critical engine components from contaminants. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your engine.

Specifications

BrandSouthMarine
Model Numbers5040140, 5032238
Product GradeReplacement Part
Outer MaterialPlastic
Vehicle Service TypeBoat
Item Weight0.317 ounces (0.01 Kilograms)
Dimensions9.37 x 3.98 x 0.98 inches

Engine Compatibility

This fuel filter is compatible with various Evinrude, Johnson, and OMC outboard engines. Please verify your engine's serial number or consult your engine's owner's manual for exact fitment.

  • Johnson Engines:
    • 4/5 HP (2003-2007)
    • 6 HP 4-Stroke (2005-2007)
    • 10/15 HP 4-Stroke (2002-2007)
    • 40/50/60/70 HP 4-Stroke (2002-2006)
  • Evinrude Engines:
    • 40/50 HP 4-Stroke (2000-2001)
  • Specific Models (Year 2012):
    • B6RL4INS, B4RL4AAA, B6R4INS, B4R4AAB & AAC
    • HP 4 PORTABLE: B4RGL4ABB, E4RL4INS, B4R4AAA, E4R4AAA, B4R4AAB & AAC, E4RL4AAB & AAC, E4RL4AAA, B4RGL4ABA
    • HP 6 PORTABLE: B6RL4AAA, B4RL4AAB & AAC, B6RGL4ABA, E6R4AAB & AAC, E6RX4AAA, B6RX4AAA, E6RGLABB, B6R4AAB & AAC, E6RL4INS, E6R4AAA, B6RG4ABB, E6RL4INS

If you are unsure about compatibility, please provide your engine serial number to a qualified technician or contact SouthMarine support.

Installation Instructions

Replacing your fuel filter is a critical maintenance task. Always ensure the engine is off and cool before beginning. Refer to your engine's specific service manual for detailed steps, as procedures may vary slightly by engine model.

  1. Safety First: Ensure the engine is turned off and the ignition key is removed. Disconnect the battery if recommended by your engine manufacturer.
  2. Locate the Fuel Filter: Identify the existing inline fuel filter on your engine's fuel line. It is typically a small, clear or white plastic cylinder.
  3. Prepare for Fuel Spillage: Place absorbent rags or a container beneath the filter to catch any fuel that may spill during removal.
  4. Note Fuel Flow Direction: Observe the direction of the fuel flow indicated by an arrow on the old filter. The new filter must be installed with the arrow pointing in the same direction (towards the engine).
  5. Disconnect Fuel Lines: Carefully disconnect the fuel lines from both ends of the old filter. You may need to use pliers to loosen clamps or release quick-connect fittings.
  6. Remove Old Filter: Once disconnected, remove the old fuel filter.
  7. Install New Filter: Insert the new SouthMarine fuel filter into the fuel line, ensuring the arrow on the filter points towards the engine.
  8. Secure Fuel Lines: Reconnect the fuel lines to the new filter, ensuring all connections are tight and secure to prevent leaks. Use new clamps if the old ones are damaged or worn.
  9. Check for Leaks: After installation, turn on the engine (if safe to do so) and carefully inspect all connections for any fuel leaks. Address any leaks immediately before operating the boat.
SouthMarine Fuel Filter with red arrow indicating fuel flow direction

Figure 1: SouthMarine Fuel Filter showing the fuel flow direction, indicated by a red arrow. Ensure the arrow points towards the engine during installation.

SouthMarine Fuel Filter, clear housing with white filter element

Figure 2: A clear view of the SouthMarine Fuel Filter, highlighting its transparent housing and internal white filter element.

SouthMarine Fuel Filter, side view

Figure 3: Side view of the SouthMarine Fuel Filter, showing the inlet and outlet connections.

SouthMarine Fuel Filter, top-down view

Figure 4: Top-down view of the SouthMarine Fuel Filter, illustrating its compact design.

Operation

Once the fuel filter is correctly installed and all connections are secure, the filter operates automatically as part of your engine's fuel system. Its primary function is to remove impurities from the fuel before it reaches the engine, ensuring optimal performance and preventing damage.

After installation, prime the fuel system according to your engine manufacturer's recommendations to ensure fuel flows through the new filter and air is purged from the lines. Start the engine and allow it to run for a few minutes, checking for smooth operation and any signs of fuel leaks around the filter.

Maintenance

Regular inspection and replacement of your fuel filter are crucial for maintaining engine health and performance. Contaminated fuel can lead to engine misfires, reduced power, and long-term damage.

  • Inspection: Periodically check the clear housing of the fuel filter for visible contaminants, such as dirt, rust, or water. A discolored or clogged filter element indicates it needs replacement.
  • Replacement Schedule: Follow your engine manufacturer's recommended service intervals for fuel filter replacement. As a general guideline, it is often recommended to replace inline fuel filters annually or every 100 hours of operation, whichever comes first. More frequent replacement may be necessary if operating in areas with poor fuel quality.
  • Replacement Procedure: Refer to the "Installation Instructions" section for the steps to replace the fuel filter. Always use genuine or equivalent quality replacement parts like the SouthMarine 5040140/5032238 fuel filter.

Troubleshooting

If you experience issues with your engine's fuel system, the fuel filter is often a good starting point for diagnosis.

SymptomPossible CauseSolution
Engine runs rough or stallsClogged fuel filter, air in fuel lineInspect/replace fuel filter. Bleed air from fuel system.
Reduced engine powerPartially clogged fuel filter restricting fuel flowReplace fuel filter.
Fuel leaks around filterLoose connections, damaged fuel lines, incorrect installationTighten connections, replace damaged lines, re-install filter correctly.
Engine fails to startSeverely clogged fuel filter, no fuel reaching engineReplace fuel filter. Check fuel supply.

If troubleshooting steps do not resolve the issue, consult a qualified marine mechanic.

Warranty Information

For specific warranty details regarding your SouthMarine Fuel Filter, please refer to the product packaging or contact SouthMarine customer support directly. Warranty terms and conditions may vary.

Customer Support

If you require further assistance or have questions about your SouthMarine Fuel Filter, please visit the official SouthMarine website or contact their customer service department. When contacting support, please have your product model number (5040140 or 5032238) and engine details readily available.

You can find more information about SouthMarine products and support at: SouthMarine Store on Amazon

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.