Introduction
The Knoll Generation Mesh Office Chair, model KNGL-57H-D20501, is designed to provide comfort and unrestricted movement, supporting various postures and work styles. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your office chair.
Product Features
- Materials: Seat made of fabric, back of elastomer resin, frame of resin molding, and legs of resin.
- Flexback Flex Top: The chair's back is designed to be soft and adaptable, supporting the user's body and accommodating multi-dimensional movement. The top portion of the back features a flexible mechanism that adjusts to various postures.
- Dynamic Suspension Control: This feature automatically adjusts the locking strength of the chair's recline mechanism based on the user's weight, ensuring optimal sitting comfort without manual adjustment.
- Seat Up and Down Adjustment: A lever located on the right front allows for easy adjustment of the seat height.
- Seat Depth Adjustment: A lever on the left side enables adjustment of the seat depth to suit individual preferences.
- Locking Range Adjustment: The lever on the right side provides three stages of recline locking: initial fixing, middle range, and full stroke.

Figure 1: Front-side view of the Knoll Generation Mesh Office Chair, highlighting its ergonomic design and mesh back.
Setup
The Knoll Generation Mesh Office Chair typically arrives pre-assembled. Follow these steps for initial setup:
- Unpacking: Carefully remove the chair from its packaging. Retain packaging materials for future transport or returns if necessary.
- Placement: Position the chair on a flat, stable surface. Ensure adequate space around the chair for movement and adjustments.
- Inspection: Before first use, inspect the chair for any visible damage or loose components. If any issues are found, contact customer support.
Operating Instructions (Adjustments)
Adjust your chair to achieve optimal comfort and ergonomic support.
- Seat Height Adjustment: Locate the lever on the right front underside of the seat. While seated, lift the lever to raise the seat. To lower the seat, lift the lever while applying your weight to the seat. Release the lever to lock the height.
- Seat Depth Adjustment: Find the lever on the left underside of the seat. Lift the lever and slide the seat forward or backward to adjust its depth. Release the lever to lock the seat in position.
- Recline Locking Range Adjustment: The lever on the right side of the chair allows you to set the recline range.
- Initial Fixing: Locks the chair in an upright position.
- Middle Range: Allows for a moderate recline.
- Full Stroke: Provides the maximum recline range.
- Dynamic Suspension Control: This feature operates automatically. The chair's recline tension will adjust to your weight, providing consistent support without manual input.
- Flexback Flex Top: The flexible design of the backrest and its top section will naturally conform to your movements and postures throughout the day.

Figure 2: Back view of the Knoll Generation Mesh Office Chair, showing the mesh construction and frame details.
Maintenance
Regular maintenance helps prolong the life and appearance of your chair.
- Cleaning Fabric Seat: For general cleaning, vacuum the fabric regularly. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner according to the product instructions, testing on an inconspicuous area first.
- Cleaning Mesh Back and Resin Frame: Wipe with a soft, damp cloth. For more thorough cleaning, a mild soap solution can be used, followed by wiping with a clean, damp cloth to remove any soap residue. Avoid abrasive cleaners.
- Casters: Periodically check casters for accumulated hair or debris and clean as needed to ensure smooth movement.
- Fasteners: Occasionally check all screws and bolts to ensure they are tight. Do not overtighten.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or degradation of materials.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not adjust height | Gas lift mechanism issue or lever not fully engaged. | Ensure the height adjustment lever is fully engaged. If the issue persists, the gas lift may need replacement. Contact support. |
| Seat depth does not adjust | Seat depth lever not fully engaged or mechanism obstructed. | Check for obstructions under the seat. Ensure the lever is fully lifted when attempting to slide the seat. |
| Chair squeaks or wobbles | Loose fasteners or lack of lubrication. | Tighten all visible screws and bolts. Apply a small amount of silicone lubricant to moving parts if squeaking persists. |
| Casters do not roll smoothly | Debris (hair, lint) caught in casters. | Turn the chair over and carefully remove any debris from the caster wheels. |
Specifications
- Model: KNGL-57H-D20501
- Brand: Knoll
- Colour: Seat: Lemongrass, Back: Storm
- Frame Color: Dark
- Back Type: Middle Back, Mesh
- Seat Material: Fabric
- Back Material: Elastomer Resin
- Frame Material: Resin Molding
- Leg Material: Resin
- Pattern: Solid
- Batteries Required: No
- ASIN: B081YKNKXL
- First Available: 11 May 2022
Warranty and Support
For warranty information, product support, or to purchase replacement parts, please refer to the official Knoll website or contact your authorized Knoll dealer. Keep your purchase receipt as proof of purchase.
For further assistance, please visit: www.knoll.com