Saitake J2X1647

Saitake Custom Car Floor Mats Instruction Manual

Model: J2X1647

Introduction

This manual provides essential information for the proper installation, use, and maintenance of your Saitake Custom Car Floor Mats. Designed for a precise fit, these mats offer superior protection and enhance the interior aesthetics of your vehicle. Please read this manual thoroughly before installation and use.

Product Overview

Saitake Custom Car Floor Mats are crafted from high-quality, environmentally friendly leather, offering flexibility, wear resistance, and excellent waterproofing. The underside features an anti-slip backing to ensure the mats remain securely in place during use. Their unique rhombic pattern stitching provides an advanced look, superior to standard silicone mats, and they are designed to resist dust and hair accumulation, making cleaning easier.

Full set of Saitake custom car floor mats in beige, showing the driver, passenger, and rear mats laid out.

Figure 1: Complete set of Saitake Custom Car Floor Mats (Beige).

This image displays the full set of custom-fit floor mats, including the driver's side, passenger's side, and rear mats, all in a beige color with a distinct rhombic stitching pattern. The mats are designed to cover the entire floor area for maximum protection.

Setup and Installation

Before installing your new Saitake floor mats, ensure the vehicle's original floor is clean and free of debris. Remove any existing floor mats to allow for a proper fit.

Installation Steps:

  1. Prepare the Vehicle: Ensure the vehicle's interior is clean and dry. Remove any old floor mats or liners.
  2. Identify Mats: Separate the mats into front (driver and passenger) and rear sections. Note that the driver's side mat is specifically shaped for the pedal area.
  3. Install Driver's Side Mat: Carefully position the driver's side mat, aligning it with the contours of the floorboard and ensuring it does not interfere with the accelerator, brake, or clutch pedals. The anti-slip backing will help secure it in place.
  4. Install Passenger's Side Mat: Place the front passenger mat, aligning it with the floor contours.
  5. Install Rear Mats: Position the rear mats, ensuring they cover the entire floor area in the back. Some models may have a single piece rear mat or two separate pieces.
  6. Check Fit: After installation, gently press down on all mats to ensure the anti-slip backing engages with the carpet. Verify that all mats lie flat and do not obstruct any vehicle controls or seat adjustments.
Saitake car floor mats installed in a vehicle interior, showing the driver and passenger footwells with detailed views of the mat texture and fit around pedals.

Figure 2: Saitake Custom Car Floor Mats installed in a vehicle.

This image illustrates the beige Saitake floor mats perfectly fitted within a car's interior, highlighting the precise cut around the pedals and the overall coverage. Insets show close-ups of the material's texture and the secure fit.

Operating and Usage Guidelines

Once installed, your Saitake floor mats require minimal "operation." However, proper usage ensures their longevity and your safety.

Care and Maintenance

Maintaining your Saitake floor mats is simple, ensuring they remain in excellent condition and continue to protect your vehicle's interior.

Cleaning Instructions:

Troubleshooting

This section addresses common issues you might encounter with your Saitake Custom Car Floor Mats.

ProblemPossible CauseSolution
Mats are shifting or sliding.Improper installation; debris under mat; anti-slip backing not engaged.Remove mats, clean vehicle floor thoroughly, and reinstall ensuring the anti-slip backing makes firm contact with the carpet. Do not place over existing mats.
Mat interferes with pedals.Incorrect positioning of the driver's side mat.Immediately remove the mat. Reinstall carefully, ensuring it is perfectly aligned and does not obstruct any pedal movement. If the issue persists, contact customer support.
Stains are difficult to remove.Harsh chemicals used; stain left for too long.Use only mild soap and water. For tough stains, a specialized leather cleaner may be used sparingly, followed by wiping with a damp cloth. Avoid abrasive scrubbing.
Mats appear discolored or faded.Prolonged exposure to direct sunlight or harsh cleaning agents.While the material is durable, extreme conditions can affect it. Ensure proper cleaning methods are followed. Discoloration due to manufacturing defect is covered under warranty.

Specifications

Warranty and Support

Saitake offers a comprehensive warranty and dedicated customer support for your custom car floor mats.

Warranty Information:

We offer a one-year free replacement and exchange service from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, accidents, or unauthorized modifications.

Customer Support:

If you have any questions, concerns, or require assistance with your Saitake floor mats, please do not hesitate to contact us. Our customer service team is committed to providing a satisfactory solution.

For support, please refer to the contact information provided at the point of purchase or on the official Saitake website.

Related Documents - J2X1647

Preview STK-7038 Wireless Controller User Manual
User manual for the STK-7038 Wireless Controller by Shenzhen Saitake Electronic Co., Ltd., detailing setup, features, and FCC compliance.
Preview STK-7009F Mobile Gaming Controller User Manual - Saitake
Comprehensive user manual for the Saitake STK-7009F mobile gaming controller, covering setup, cloud gaming, key configuration, RGB lighting, and TURBO functions for Android and iOS devices.
Preview Saitake STK-7024S Wireless Gamepad User Manual
User manual for the Saitake STK-7024S wireless gamepad, detailing first-time pairing, reconnection, vibration adjustment, and FCC compliance information.
Preview Saitake STK-7040RG Game Controller User Manual
Comprehensive user manual for the Saitake STK-7040RG game controller, detailing its features, connectivity, and operation for various gaming platforms.
Preview Saitake STK-7032SN Wireless Gamepad for Nintendo Switch: User Manual
Comprehensive user manual for the Saitake STK-7032SN wireless gamepad, covering pairing, connection, vibration and turbo speed adjustment, NFC functionality, PC X-Input mode, calibration, and warranty information.
Preview Saitake STK-7046 Portable Wireless Joypad User Manual
User manual for the Saitake STK-7046 Portable Wireless Joypad, detailing installation, connection, features like Turbo and vibration, and troubleshooting steps for gaming consoles.