1. Introduction
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Elica Leone 120 48-inch Wall Mounted Range Hood. Please read this manual thoroughly before using the appliance and retain it for future reference.
2. Safety Information
Always follow basic safety precautions when using this appliance to reduce the risk of fire, electric shock, or injury to persons.
- Ensure proper installation by a qualified technician in accordance with all local codes and ordinances.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not use this unit with any solid-state speed control device.
- Clean grease filters frequently. Grease should not be allowed to accumulate on fan or filters.
- Never leave surface units unattended at high settings. Boil-over causes smoking and greasy spill-overs that may ignite.
- Always turn hood ON when cooking at high heat or when flaming foods.
- Use appropriate pan size. Always use cookware appropriate for the size of the surface element.
- In the event of a grease fire, smother flames with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. NEVER PICK UP A FLAMING PAN.
- Do not use water on grease fires.
3. Package Contents
Verify that all components are present and undamaged:
- Range Hood Assembly
- Baffle Filters
- Chimney Sections
- Mounting Hardware (screws, anchors, brackets)
- Air Outlet Adapter
- Power Cord
- Instruction Manual
4. Specifications
| Feature | Description |
|---|---|
| Brand | Elica |
| Model | Leone 120 48" Stainless |
| Material | Stainless Steel |
| Mounting Type | Wall Mount |
| Controls Type | Push Button (based on product images) |
| Light Source Type | LED |
| Filter Type | Baffle |
| Air Flow Capacity | 1200 Cubic Feet Per Minute (CFM) |
| Product Dimensions | 24"D x 48"W x 12.13"H |
| UPC | 190603003628 |
5. Setup & Installation
Proper installation is crucial for the performance and safety of your range hood. It is recommended that installation be performed by a qualified professional.
5.1 Pre-Installation
- Location: Identify the center of the wall above your cooking surface where the hood will be installed. Ensure there is sufficient structural bracing within the wall to support the weight of the range hood.
- Height: The minimum height between the cooking surface and the bottom of the range hood must be at least 30 inches. Consult local building codes for specific requirements.
- Marking: Draw a vertical centerline on the wall. Then, draw a horizontal line at the desired height for the bottom of the hood.

This image shows the Elica Leone 120 range hood mounted above a cooking range in a contemporary kitchen. The hood is centered above the cooktop, illustrating proper placement.
5.2 Mounting the Hood
- Temporarily position the hood on the wall, aligning its center with the vertical reference line and its bottom edge with the horizontal line.
- Mark the locations for the mounting screws through the pre-drilled holes in the hood's mounting bracket.
- Remove the hood. Drill pilot holes at the marked locations and insert wall anchors if necessary.
- Install the mounting screws, leaving their heads extended approximately 1/4 inch from the wall to allow the hood to hang. Ensure the screws are properly leveled.
- Carefully lift the hood and align the keyhole slots on its back with the extended screw heads. Slide the hood down to secure it.
- Tighten the mounting screws to firmly secure the hood to the wall.

This image displays the Elica Leone 120 range hood from a frontal perspective, highlighting its stainless steel finish and pyramidal shape, ready for installation.
5.3 Ducting and Electrical Connections
- Install the air outlet adapter onto the top of the hood and secure it with screws.
- Connect the ductwork (flexible or rigid) to the air outlet adapter. Use foil-backed tape to seal all joints for optimal performance and to hold the duct in place.
- Make the necessary electrical connections according to local codes. Ensure the power cord is securely connected.
5.4 Chimney Installation
- Assemble the two-part chimney sections by sliding them together.
- Place the assembled chimney over the hood, ensuring it aligns with the chimney mounting brackets on the wall.
- Secure the chimney to the mounting brackets using the provided screws.
- Slide the decorative crown onto the top chimney mounting bracket and secure it into place.
6. Operating Instructions
Your Elica Leone 120 range hood features intuitive push-button controls for easy operation of fan speeds and lighting.

This image provides a detailed view of the push-button controls on the Elica Leone 120 range hood, showing the illuminated blue backlighting for the buttons, indicating active functions.
- Power On/Off: Press the power button to turn the hood on or off.
- Fan Speed: Select from four fan speeds (1-4) by pressing the corresponding numbered buttons. Adjust the speed based on your cooking needs.
- Lighting: Press the light button to turn the LED lights on or off.
- Timer: A timer function may be available to automatically shut off the fan after a set period. Refer to the specific button for this feature.

This image shows the control panel of the Elica Leone 120 range hood with the lights turned off, providing a clear view of the button layout and design.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your range hood.
- Baffle Filters: The stainless steel baffle filters should be cleaned regularly (e.g., monthly, depending on usage). To remove, locate the release latches and pull down. The filters are washable and can be cleaned by hand with hot soapy water or in a dishwasher. Ensure they are completely dry before re-installing.
- Exterior Cleaning: Clean the exterior surfaces with a soft cloth and a non-abrasive stainless steel cleaner. Avoid harsh chemicals or abrasive pads.
- LED Lights: LED lights are long-lasting and generally do not require replacement. If a light fails, contact customer support for assistance.
8. Troubleshooting
Before contacting customer support, review the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not operate | No power supply | Check power cord connection and circuit breaker. |
| Poor suction | Clogged filters; improper ductwork; fan speed too low | Clean or replace filters; check ductwork for obstructions or leaks; increase fan speed. |
| Excessive noise | Loose parts; fan obstruction; improper installation | Check for loose screws or components; remove any obstructions from the fan; ensure proper installation. |
| Lights not working | Faulty LED module; loose connection | Ensure power is supplied to the hood. If problem persists, contact customer support. |
9. Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.





