1. Product Overview
The Weiser Tavaris Entry Door Handle and Vedani Interior Lever Handleset offers a modern and elegant design for your home's entry. This handleset is designed to be paired with a separate Weiser deadbolt (electronic or mechanical) as it does not include a locking deadbolt. The crisp, clean appearance of the Satin Nickel finish complements various home styles.
Key Features:
- Designed for pairing with a separate Weiser deadbolt (not included).
- Includes Tavaris lever for the interior side of the door.
- Features an adjustable latch to fit all standard door preparations.
- Easy installation with basic tools.
2. Included Components
Carefully unpack the handleset and verify that all components are present:
- Exterior Handle (Tavaris Entry Door Handle)
- Interior Lever (Vedani Interior Lever)
- Latch Mechanism
- Mounting Hardware (screws, spindle)
- Installation Manual (this document)
Figure 1: Weiser Tavaris Entry Door Handle. This image shows the full exterior handleset, featuring the sleek, modern design in a satin nickel finish.
3. Setup and Installation
Installation of the Weiser Tavaris Handleset is designed to be straightforward and can typically be completed in minutes with a screwdriver.
3.1 Tools Required
- Phillips Head Screwdriver
- Measuring Tape (optional, for verifying door preparation)
3.2 Door Preparation
Ensure your door is prepared with standard bore holes. The handleset features an adjustable latch to accommodate common backset dimensions.
3.3 Installation Steps
- Install Latch: Insert the latch mechanism into the edge of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with screws.
- Install Exterior Handle: Position the exterior handle on the door, aligning the spindle through the latch mechanism.
- Install Interior Lever: Place the interior lever assembly onto the door, ensuring the spindle engages correctly.
- Secure Assemblies: Use the provided mounting screws to firmly attach the interior and exterior components together. Do not overtighten.
- Test Operation: Verify that the handle and lever operate smoothly and retract the latch bolt fully.
Figure 2: Weiser Vedani Interior Lever. This image displays the interior lever, which features a square rose and a flat, rectangular lever in a satin nickel finish.
Figure 3: Weiser Tavaris Handleset Components. This image shows a close-up of the handleset's top mechanism, including the latch and part of the exterior handle, highlighting the satin nickel finish.
4. Operating Instructions
The Weiser Tavaris Entry Door Handle and Vedani Interior Lever Handleset provides a simple and reliable mechanism for opening and closing your door.
- To Open from Exterior: Depress the thumb-press on the exterior handle to retract the latch bolt, then pull or push the door open.
- To Open from Interior: Depress the interior lever to retract the latch bolt, then pull or push the door open.
- To Close: Simply push the door shut. The spring latch will automatically engage.
Note: This handleset does not include a deadbolt. For security, ensure a compatible Weiser deadbolt is installed above this handleset.
5. Maintenance
Proper care will ensure the longevity and appearance of your Weiser handleset.
- Cleaning: Clean the handleset regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishing agents, as these can damage the finish.
- Lubrication: If the latch mechanism becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the latch bolt. Do not use oil-based lubricants.
- Tightening Screws: Periodically check and tighten any loose mounting screws to ensure secure operation. Do not overtighten.
6. Troubleshooting
If you encounter issues with your handleset, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Handle/Lever is stiff or hard to turn. | Lack of lubrication, misaligned components, or debris. | Apply silicone lubricant to the latch bolt. Check for proper alignment during installation. Clean any debris. |
| Latch bolt does not retract fully. | Improper installation, loose screws, or worn components. | Recheck installation steps, ensure screws are tightened. If issue persists, contact support. |
| Handleset feels loose on the door. | Loose mounting screws. | Tighten all mounting screws. Do not overtighten. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Weiser |
| Model Number | 9GLA77710-002 |
| UPC | 059184390384 |
| Material | Metal, Stainless Steel Handle |
| Color/Finish | Satin Nickel (Brushed) |
| Style | Transitional |
| Product Dimensions (L x W) | 19.9L x 14W centimetres |
| Item Weight | 2.06 kg |
| Handle Type | Pull Handle (Exterior), Lever (Interior) |
| Lock Type | Key Lock (Note: Handleset itself does not include deadbolt) |
| Hand Orientation | Universal |
| Special Feature | Easy to Install |
8. Warranty and Support
Manufacturer Warranty: This Weiser product is backed by a Lifetime Limited Warranty. For specific details regarding coverage and terms, please refer to the warranty information provided with your purchase or visit the official Weiser website.
Customer Support: If you require further assistance with installation, operation, or troubleshooting, please contact Weiser customer support.
- Manufacturer: Weiser
- Contact Information: MISSISSAUGA, ON, L5W 0G7 CA (Refer to Weiser's official website for current contact methods like phone or email.)
- Online Resources: Visit the Weiser Store on Amazon for more products and information.