Introduction
This manual provides comprehensive instructions for the Eyliden Microfiber Twist Mop Replacement Heads, specifically designed for Eyliden Twist Mop Models FZ-02-2020 and FZ-02-2019. Please read this manual carefully before use to ensure proper installation and maintenance, maximizing the lifespan and effectiveness of your mop heads.
Product Overview
The Eyliden Microfiber Twist Mop Replacement Heads are engineered for efficient and effective floor cleaning. Each pack contains two replacement heads, ensuring you always have a fresh head ready for use.
- Compatibility: Exclusively designed for Eyliden Twist Mop Models FZ-02-2020 and FZ-02-2019. Ensure your mop model matches for proper fit and function.
- Microfiber Material: The mop heads are made from high-quality microfiber, known for its strong water absorbency and effective dirt and hair trapping capabilities.
- Scrubbing Pad: Each mop head includes a scrubbing pad to assist in removing stubborn stains without damaging your floors.
- Safe for All Floor Types: The microfiber material is gentle and safe for use on various surfaces, including bamboo, hardwood, tile, and laminate.

Figure 1: Mop head compatibility. Designed for Eyliden FZ-02 Twist Mop only.

Figure 2: Features of the self-twisting mop replacement head, emphasizing strong water absorbency and detergency.

Figure 3: The scrubbing pad feature for stubborn stains and compatibility with multiple floor surfaces.
Setup and Replacement
This section details how to replace the mop head on your Eyliden Twist Mop. The process is designed to be quick and simple.
- Prepare the Mop: Ensure the mop head is clean and free of debris before replacement.
- Lift Up: Gently lift the mop head mechanism upwards to release the old mop head.
- Twist to Dry (Optional): If you are replacing a wet mop head, you may twist it to wring out excess water before removal.
- Attach New Head: Align the new replacement mop head with the mop handle's attachment point. Push down firmly and twist to secure it in place. The plastic holder on the new mop head should click or tighten onto the handle.

Figure 4: Step-by-step guide on how to replace the mop head.

Figure 5: Two replacement mop heads, ready for use.
Operating Instructions
The Eyliden Microfiber Twist Mop Replacement Heads are versatile for both wet and dry cleaning.
- Wet Mopping: For wet cleaning, dampen the mop head with water and your preferred cleaning solution. The microfiber material effectively absorbs moisture and lifts dirt from surfaces.
- Dry Mopping: For dry cleaning, use the mop head to collect dust, pet hair, and debris from your floors. The microfiber's electrostatic properties attract and hold particles.
- Wringing Mechanism: Utilize the mop's twist mechanism to wring out excess water from the mop head, allowing for controlled dampness and faster drying times for your floors.
Maintenance and Care
Proper care extends the life of your Eyliden Microfiber Twist Mop Replacement Heads.
- Hand Wash Only: The mop heads are designed for hand washing. Do not machine wash, as this can damage the plastic attachment part and the microfiber strands.
- Cleaning: After each use, rinse the mop head thoroughly under running water to remove dirt and debris. You may use a mild detergent if necessary.
- Drying: Wring out excess water and hang the mop head to air dry completely. Ensure it is fully dry before storing to prevent mildew and odors.
- Replacement: Replace mop heads regularly, typically every 3-6 months depending on usage, or when you notice reduced cleaning performance.

Figure 6: Care instructions: Reusable and hand wash only. Not machine washable.
Specifications
| Brand | Eyliden |
| Model Numbers | FZ-02-2020, FZ-02-2019 |
| Head Material | Microfiber |
| Unit Count | 2.0 Count |
| Surface Recommendation | Floor (Bamboo, Hardwood, Tile, Laminate) |
| Item Weight (per head) | Approximately 0.475 Pounds (0.95 Pounds for 2) |
| Product Dimensions (Mop Head) | 15.75"L x 15.75"W x 25"H (expanded) |
Troubleshooting
If you encounter issues with your Eyliden Microfiber Twist Mop Replacement Heads, consider the following:
- Mop Head Not Attaching Securely: Ensure the mop head is correctly aligned with the handle's attachment point and twisted firmly until secure. Verify that you have the correct model replacement head for your Eyliden mop.
- Reduced Cleaning Performance: The mop head may be saturated with dirt or worn out. Clean the mop head thoroughly or replace it with a new one.
- Unpleasant Odor: Mop heads can develop odors if not dried properly. Always air dry completely after washing. For persistent odors, a mild disinfectant can be used during washing.
Warranty and Support
For warranty information or further assistance, please refer to the product packaging or contact Eyliden customer support directly. Keep your purchase receipt for any warranty claims.