1. Introduction
This manual provides detailed instructions for the safe and efficient use of your GOOJPRT PT-210 Portable Thermal Printer. Please read this manual thoroughly before operating the device and keep it for future reference. The PT-210 is a compact, lightweight, and portable thermal printer designed for various applications such as printing receipts, tickets, and order information in retail, logistics, and restaurant environments.
2. Safety Information
- Do not expose the printer to water or moisture.
- Avoid dropping or subjecting the printer to strong impacts.
- Use only the provided power adapter and USB cable.
- Do not attempt to disassemble or repair the printer yourself. Contact qualified service personnel.
- Keep out of reach of children.
- Ensure proper ventilation when charging.
3. Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, contact your vendor.
- 1 x GOOJPRT PT-210 Portable Thermal Printer
- 1 x Thermal Paper Roll
- 1 x Carrying Bag
- 1 x USB Cable
- 1 x Power Adapter
- 1 x CD Driver
- 1 x User Manual (English and Chinese)
4. Product Overview
The GOOJPRT PT-210 is designed for ease of use and portability. Below are images illustrating its key features and typical application scenarios.
Figure 4.1: The GOOJPRT PT-210 printer, highlighting its compact and lightweight design for easy portability.
Figure 4.2: A detailed view of the printer's top panel, showing the GOOJPRT branding, 'Portable printer' label, and the power and feed buttons.
Figure 4.3: Various application scenarios where the PT-210 printer can be utilized, such as restaurants, supermarkets, shopping malls, warehouses, drugstores, and logistics operations.
Figure 4.4: The physical dimensions of the PT-210 printer, measuring approximately 11 cm (4.33 in) in length, 8.8 cm (3.46 in) in width, and 4.1 cm (1.61 in) in height.
5. Setup
5.1 Charging the Battery
Before first use, fully charge the printer's built-in 7.4V 1500mAh Li-ion battery. Connect the provided power adapter to the printer's charging port and plug it into a power outlet. The charging time is typically 2-4 hours. The indicator light will show charging status.
5.2 Loading Thermal Paper
- Open the paper compartment cover by sliding the latch or pressing the release button.
- Insert a new roll of 58mm thermal paper, ensuring the printing side faces the print head.
- Pull a small amount of paper out past the print head.
- Close the paper compartment cover firmly until it clicks into place.
5.3 Connecting to Devices
The PT-210 supports Bluetooth 4.0, USB, and Wi-Fi connectivity.
5.3.1 Bluetooth Connection (for Android/iOS)
- Ensure the printer is powered on.
- Enable Bluetooth on your smartphone or tablet.
- Search for available Bluetooth devices and select "PT-210" (or similar name).
- If prompted, enter the pairing code (usually "0000" or "1234").
- Download the recommended printing application: "Kaisen Printer" from your device's app store (Google Play Store for Android, Apple App Store for iOS).
- Open the app and select the paired printer to begin printing.
5.3.2 USB Connection (for Windows)
- Connect the printer to your computer using the provided USB cable.
- Insert the included CD driver into your computer's CD-ROM drive.
- Follow the on-screen instructions to install the printer driver. If your computer does not have a CD drive, drivers may be available for download from the manufacturer's website.
- Once the driver is installed, the printer will appear in your computer's list of printers and can be used with compatible software.
6. Operating Instructions
6.1 Power On/Off
- To power on: Press and hold the power button until the indicator light illuminates.
- To power off: Press and hold the power button until the indicator light turns off.
6.2 Printing
Once connected via Bluetooth or USB, you can initiate printing from your chosen application or software. Ensure the paper roll is correctly loaded and the printer has sufficient battery charge.
6.3 Auto Sleep/Wake Feature
The printer features an automatic sleep mode to conserve power. It will enter sleep mode after a period of inactivity and automatically wake up when a print command is received or a button is pressed.
7. Maintenance
7.1 Cleaning the Print Head
Regularly clean the print head to ensure optimal print quality. Use a soft cloth dampened with isopropyl alcohol. Gently wipe the print head surface. Allow it to dry completely before use.
7.2 Battery Care
- Avoid fully discharging the battery frequently.
- Charge the battery regularly, even if the printer is not in use for extended periods.
- Store the printer in a cool, dry place when not in use.
7.3 Paper Storage
Store thermal paper rolls in a cool, dry place away from direct sunlight and heat to prevent premature fading or damage to the thermal coating.
8. Troubleshooting
If you encounter issues with your printer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Printer does not power on | Low battery; Power button not pressed correctly | Charge the battery; Press and hold the power button for a few seconds. |
| No print output | Paper loaded incorrectly; Out of paper; Printer not connected | Reload paper correctly; Replace paper roll; Check Bluetooth/USB connection. |
| Poor print quality | Dirty print head; Low battery; Old/damaged thermal paper | Clean the print head; Charge the battery; Use new thermal paper. |
| Cannot connect via Bluetooth | Bluetooth not enabled on device; Printer not in pairing mode; Incorrect pairing code | Enable Bluetooth; Ensure printer is discoverable; Enter correct pairing code. |
| Printer not recognized by PC | USB cable faulty; Driver not installed; Incorrect USB port | Try a different USB cable; Install printer driver from CD or website; Try a different USB port. |
9. Specifications
Detailed technical specifications for the GOOJPRT PT-210 Portable Thermal Printer:
| Feature | Specification |
|---|---|
| Print Method | Thermal Line Printing |
| Bluetooth Version | 4.0 |
| Interface | Power Jack, Mini USB |
| Print Speed | 50 - 89.9 mm/s |
| Dots Per Line | 384 dots/line |
| Paper Thickness | 0.05 - 0.10 mm |
| Paper Width | 57 +/- 0.5 mm |
| Print Width | 48 +/- 0.5 mm |
| Roll Paper Diameter | 25 mm |
| Lifecycle Time | 50 km (printing density under 12.5%) / 100 million pulses |
| Barcode Type | UPC-A/E, EAN-13/8, CODE39/93/128, TIF, CODABAR; 2D: QR code, PDF417 |
| Operating Temperature | -10 to 50 degrees Celsius |
| Internal Characters | ASCII CH (8x16, 9x17, 9x24, 12x24); GB18030 (16x16, 24x24) |
| Print Command | ESC/POS compatible with order sets |
| Paper Loading | Easy paper loading |
| Black Mark Test | Supported |
| Battery | 7.4V 1500mAh Li-ion battery |
| Charging Time | 2 - 4 hours |
| Standby Time | 100 hours |
| Usage Duration | 3 days (continuous operation) |
| Charger | DC 12V/1A |
| Max Resolution | 203 DPI |
| Product Size (L x W x H) | 11.00 x 8.80 x 4.10 cm |
| Compatible OS | Android, iOS, Windows |
10. Warranty and Support
The GOOJPRT PT-210 Portable Thermal Printer comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact your point of purchase or the official GOOJPRT customer service.
Keep your purchase receipt and product serial number handy when contacting support.
