1. Introduction
This manual provides essential information for the safe and effective operation, maintenance, and care of your Kress 800 PE SDS Plus Drill. Please read these instructions carefully before using the tool for the first time and keep them for future reference. Proper use and adherence to safety guidelines will ensure optimal performance and extend the life of your drill.
Safety Warning: Always wear appropriate personal protective equipment, such as safety glasses, hearing protection, and gloves, when operating power tools. Disconnect the tool from the power supply before making any adjustments or changing accessories.
2. Product Overview
An image showing the Kress 800 PE SDS Plus Drill. The drill is red and grey, featuring an SDS-Plus chuck, an auxiliary handle, and a drilling depth gauge attached to the front. The Kress logo is visible on the side.
The Kress 800 PE is a robust SDS Plus hammer drill designed for various drilling and chiseling tasks in concrete, masonry, wood, and steel. Its powerful 800 Watt motor and SDS-Plus tool holder ensure efficient and secure operation for professional and demanding DIY applications.
3. Technical Specifications
- Nominal Rated Input: 800 Watt
- No-load Speed (1st gear): 0 – 1,100 1/min.
- No-load Rate of Percussion: 4,800 1/min.
- Max. Impact Energy: 3.0 Joule
- Max. Bore Diameter for Hammer Drilling: 16 mm
- Max. Bore Diameter for Hammer Drilling in Concrete: 26 mm
- Max. Bore Diameter in Steel: 13 mm
- Max. Bore Diameter in Wood: 35 mm
- Clamping Collar Ø: 43 mm
- Tool Weight: 2.8 kg
- Chuck Type: SDS-Plus
- Power Source: Corded Electric
- Voltage: 220 Volt
- Special Features: Reverse Rotation, Hammer Functionality
4. Key Features
- Rotation Stop with Spindle Lock: Facilitates easy chiseling operations by disengaging rotation.
- Hammer Action Stop: Allows for normal drilling and screwing without impact.
- Safety Friction Clutch: Protects the user and the tool in case of bit jamming.
- SDS-Plus Tool Holder: Ensures quick, tool-free bit changes and secure bit retention.
5. Setup
5.1 Attaching the Auxiliary Handle and Depth Gauge
- Loosen the auxiliary handle by rotating it counter-clockwise.
- Slide the handle over the chuck and onto the clamping collar of the drill body.
- Adjust the handle to a comfortable and secure working position.
- Insert the drilling depth gauge into the hole on the auxiliary handle.
- Tighten the auxiliary handle by rotating it clockwise until it is firmly secured.
5.2 Inserting SDS-Plus Drill Bits
- Clean the shank of the SDS-Plus drill bit.
- Pull back the chuck sleeve on the drill.
- Insert the drill bit into the chuck until it clicks into place.
- Release the chuck sleeve.
- Pull on the drill bit to ensure it is securely locked. A slight axial play is normal for SDS-Plus systems.
5.3 Power Connection
Ensure the drill's voltage matches your power supply. Plug the power cord into a suitable electrical outlet. Always check the power cord for damage before use.
6. Operating Instructions
6.1 Mode Selection
The Kress 800 PE features a mode selector switch to choose between different operating modes:
- Hammer Drilling: For drilling in concrete, stone, and masonry. The rotation and hammer action are engaged.
- Rotary Drilling: For drilling in wood, metal, and plastics. Only rotation is engaged (hammer action stop).
- Chiseling: For light chiseling work. Only hammer action is engaged (rotation stop with spindle lock).
Rotate the mode selector switch to the desired symbol. Ensure the switch is fully engaged in the selected position before starting the drill.
6.2 Starting and Stopping the Drill
- To Start: Press the ON/OFF trigger switch.
- To Stop: Release the ON/OFF trigger switch.
- Continuous Operation: For continuous operation, press the ON/OFF trigger switch and then press the lock-on button. To switch off, press the ON/OFF trigger switch again.
6.3 Using the Drilling Depth Gauge
The drilling depth gauge allows you to pre-set a specific drilling depth. Adjust the gauge to the desired depth relative to the tip of the drill bit. When drilling, stop once the end of the depth gauge touches the workpiece surface.
6.4 Reverse Rotation
The drill features a reverse rotation function, useful for removing jammed drill bits or for driving/removing screws when using appropriate accessories. The direction of rotation is typically changed via a switch located near the trigger.
6.5 Safety Friction Clutch
In the event of the drill bit jamming, the integrated safety friction clutch will disengage the drive to protect the user from sudden rotational forces and prevent damage to the tool. Immediately release the trigger if the clutch activates.
7. Maintenance
7.1 Cleaning
Regularly clean the ventilation slots of the drill to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use water or chemical cleaning agents.
7.2 Storage
Store the drill in a dry, secure location, out of reach of children. Protect it from moisture and extreme temperatures. The provided Klick-Box professional carrying case is ideal for storage and transport.
8. Troubleshooting
If the drill does not operate correctly, first check the power supply and ensure the plug is securely inserted. Verify that the mode selector switch is correctly engaged. If issues persist, consult a qualified service technician. Do not attempt to repair the tool yourself.
9. Scope of Delivery
The following items are included with your Kress 800 PE SDS Plus Drill:
- Kress 800 PE SDS Plus Drill
- Additional handle with drilling depth gauge
- Professional carrying case Klick-Box
10. Warranty and Support
This Kress product is manufactured to high-quality standards. For information regarding warranty terms and conditions, or for technical support, please refer to the warranty card included with your product or contact your authorized Kress dealer. Keep your purchase receipt as proof of purchase.
