Introduction
This manual provides essential information for the installation, operation, and maintenance of your DENALI Driving Light Mount Adapter for BMW Original OEM Motorcycle Light Mounts. Please read this manual thoroughly before installation to ensure proper use and longevity of the product.
What's in the Box
The package should contain the following components:
- DENALI Crashbar Light Mounting Adapter for Select BMW OEM Motorcycle Light Mounts
- Necessary mounting hardware (bolts, washers, nuts)
Inspect all components upon opening the package. If any parts are missing or damaged, please contact DENALI customer support.
Setup and Installation
The DENALI Driving Light Mount Adapter is designed for straightforward installation on compatible BMW Original OEM Motorcycle Light Mounts. Professional installation is recommended if you are unfamiliar with motorcycle accessory installation.
- Preparation: Ensure the motorcycle is stable and turned off. Gather necessary tools (e.g., wrenches, hex keys).
- Identify Mounting Point: Locate the designated OEM light mounting points on your BMW motorcycle. These adapters are specifically designed to integrate with these existing points.
- Attach Adapter: Secure the DENALI mount adapter to the OEM mounting point using the provided hardware. Ensure all bolts are finger-tight before final tightening.
- Mount Driving Light: Once the adapter is securely in place, attach your DENALI driving light (sold separately) to the adapter using the light's included mounting hardware.
- Final Tightening: Systematically tighten all bolts to the manufacturer's recommended torque specifications. Do not overtighten.
- Check Stability: Gently test the installed light and adapter for any movement or looseness. Ensure the light is aimed correctly.
Image: The DENALI Driving Light Mount Adapter shown installed on a BMW motorcycle's crash bar, with a square-shaped driving light securely attached. This illustrates the typical mounting position and appearance of the adapter in use.
Operating Instructions
The DENALI Driving Light Mount Adapter is a passive component designed to provide a secure mounting point for auxiliary driving lights. It does not have any operational functions itself. Once installed, the operation of your driving lights will be governed by their own specific instructions and wiring to your motorcycle's electrical system.
Ensure that any connected driving lights are wired and operated according to local regulations and the light manufacturer's guidelines.
Maintenance
To ensure the longevity and safe operation of your DENALI Driving Light Mount Adapter, perform the following maintenance checks periodically:
- Visual Inspection: Regularly inspect the adapter and all mounting hardware for any signs of wear, corrosion, or damage.
- Fastener Check: Periodically check all bolts and nuts securing the adapter and the light to ensure they remain tight. Vibrations from motorcycle operation can sometimes loosen fasteners.
- Cleaning: Clean the adapter with a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
Troubleshooting
Most issues related to the mount adapter are installation-related. If you encounter problems, consider the following:
- Loose Mount: If the adapter or light feels loose after installation, re-check all fasteners. Ensure they are tightened to the appropriate torque specifications.
- Incorrect Fit: Verify that the adapter model (LAH.07.10900) is compatible with your specific BMW OEM light mounts. Refer to your motorcycle's manual or DENALI's compatibility guide.
- Vibration: Excessive vibration of the light may indicate loose mounting or an issue with the light itself. Ensure the adapter is firmly secured to the motorcycle and the light is firmly secured to the adapter.
If issues persist, contact DENALI customer support for assistance.
Specifications
| Attribute | Detail |
|---|---|
| Brand | DENALI |
| Model | LAH.07.10900 |
| Manufacturer | Vision X Lighting |
| Item Weight | 1 pounds |
| Package Dimensions | 7 x 5 x 2 inches |
| ASIN | B081S91SLH |
| Date First Available | September 24, 2020 |
Warranty Information
DENALI products are manufactured to high standards and are backed by a manufacturer's warranty. Specific warranty terms and conditions may vary. Please refer to the official DENALI website or contact their customer service for detailed warranty information regarding your mount adapter.
Customer Support
For technical assistance, installation questions, or warranty claims, please contact DENALI customer support. Visit the official DENALI website for contact details, FAQs, and additional resources.
Note: This product is from a small business brand. Your support is appreciated.
